Question about Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television

2 Answers

Convergence settings what are the remote control codes to adjust convergence? I know "mute-1-8-3 get you into the adjustment screen but what buttons on the remote do what?

Posted by on

  • mpabbo Oct 31, 2007

    got the codes.... now just need to know how to make the upper lines straight?

    the picture is curved at the top of the screen and is also on the grid but i cant seem to straighten the lines with any of the options on the remote??

    thx

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Key Functions
7,8,9 = select R, G or B
+100,0,PRE-CH = mute R, G or B
INFO = test/normal
4 = shifts from point to line, grid move
2 = restore factory
SOURCE = H/V select
ADD/DEL = Save
S.MODE = exit
MUTE = cursor forward
P.MODE = cursor back
Volume +/- = moves convergence left or right
Channel +/- = moves convergence up or down
1 = zero's all convergence settings (ugly!)
U/D/L/R = move cursor
SELF FOCUS = saves the convergence adjustment - do before exiting

Good luck.  I let a sub-standard service joint work on mine - they replaced the OEM chips with a higher wattage equivalent, and I've had nothing but problems ever since.

Posted on Oct 26, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Forgot, 1st it's mute-1-8-3 to gain access than it's
7,8,9 = select R, G or B
+100,0,PRE-CH = mute R, G or B
INFO = test/normal
4 = shifts from point to line, grid move
2 = restore factory
SOURCE = H/V select
ADD/DEL = Save
S.MODE = exit
MUTE = cursor forward
P.MODE = cursor back
Volume +/- = moves convergence left or right
Channel +/- = moves convergence up or down
1 = zero's all convergence settings (ugly!)
U/D/L/R = move cursor
SELF FOCUS = saves the convergence adjustment - do before exiting

Posted on Oct 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Needd to get into grid programming to adjust the red gun


Here are instructions on how to get into the TECH menu to adjust convergence--Understand if once you get there and red or blue are skewed and will not adjust--the convergence chips this set uses are bad.

Just look to see if it will or will not adjust.

If this information helped you rate this solution as I do this here for free.

SD TECH
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Toshiba entry to adjust


With the set on press MUTE on the remote.

Then press and HOLD mute for several seconds and while still holding it on the remote press Menu on the front of the set.

A (S) should appear in the upper right corner of the screen. (It means you are in the Service mode)

Press menu again on the front of the set

7 on the remote will call up the convergence grid

3 on the remote will change the color to adjust from red to green to blue(do not adjust GREEN)


You navigate the grid with 2, 4, 6, and 8 buttons.

To stop the cursor from blinking so you can adjust at any point use the 5 button—to move again use the 5 button.


When you finish you exit by hitting 7 on the remote again.


Sometimes you have to try a few times to get into the menu—I have had my problems but once in it is easy.


Dec 26, 2009 | Toshiba TN50X81 50" Rear Projection...

1 Answer

How to get in convergence set up mode sony tv kp51ws500


OTHER THAN TRYING IT IN THE CUSTOMER MENU there is the tech menu.

With the set off on the original Sony remote control press:

Display, 5, Vol up and power.

The set should come on with a lot of words and numbers on screen.

With 1 OR 4 you navigate until you see PJE on the screen.

9, and then 6 on the remote will bring up the convergence grid. You will see a grid with a blinking colored cursor--if it is green do nothing--3 will allow you to change to red or blue or green. IT IS A GOOD IDEA TO CHANGE THE SET TO A UNUSED VIDEO INPUT TO MAKE IT EASY TO SEE WHAT YOU ARE DOING.

Select red with the three button and navigate with the 1 or 4 buttons--enter button will allow you to adjust. enter again will allow you to navigate with the 1 or 4 buttons-- you want to get to the middle of the screen and then with 1 or 4 buttons navigate from the center around the screen.

You will find 1 moves adjustment in one direction and 4 in another. Go all around and adjust red first. Then repeat with blue.

YOU ACTUALLY ADJUST USING THE CURSOR BUTTONS--WHEEL NEAR THE MIDDLE OF THE REMOTE--YOU WILL SEE THE CHANGES AS YOU DO THIS.

When you are done hit Muting and then enter to save adjustments.

NOTE: some of these sets require the convergence be adjusted in the 4X3 which will also adjust in the FULL--if the set has the ZOOM AND WIDE zoom you will have to repeat the adjustment again in one of those modes to adjust Zoom and Wide Zoom.

Also if you have HD connection you may have to adjust it there also--many of these sets require it to be adjusted 3 times in the three modes.

IF convergence will not adjust in any one of the picture modes you have a convergence circuit problem and need to replace the convergence chips etc.

When you are done be sure to hit Muting and then Enter to save adjustments you have made. The word Write will appear on screen in green when you press muting and then in green when you press enter--it means you have saved the adjustments.

NEVER TRY TO ADJUST GREEN!

If you have questions or need help let me know.

IF this information has helped you rate this solution as I do this here for free.

SD TECH

Dec 06, 2009 | Sony KP-51WS500 51" Rear Projection...

1 Answer

Yellow arch on bottom left of screen. I have


OK, HERE are the instructions:
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Toshiba entry to adjust


With the set on press MUTE on the remote.

Then press and HOLD mute for several seconds and while still holding it on the remote press Menu on the front of the set.

A (S) should appear in the upper right corner of the screen. (It means you are in the Service mode)

Press menu again on the front of the set

7 on the remote will call up the convergence grid

3 on the remote will change the color to adjust from red to green to blue(do not adjust GREEN)


You navigate the grid with 2, 4, 6, and 8 buttons.

To stop the cursor from blinking so you can adjust at any point use the 5 button—to move again use the 5 button.


When you finish you exit by hitting 7 on the remote again.


Sometimes you have to try a few times to get into the menu—I have had my problems but once in it is easy.


if adjusting does not cure the problem one of the convergence chips this set uses and or a resistor are bad.

Let me know what happens and if you need more help let me know
SD TECH



Sep 30, 2009 | Toshiba TP50H50 50" Rear Projection...

1 Answer

How do I get into the tech convergance of my


Here are my own instructions----WHATEVER YOU DO DO NOT ATTEMPT TO ADJUST THE GREEN!

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Toshiba entry to adjust


With the set on press MUTE on the remote.

Then press and HOLD mute for several seconds and while still holding it on the remote press Menu on the front of the set.

A (S) should appear in the upper right corner of the screen. (It means you are in the Service mode)

Press menu again on the front of the set

7 on the remote will call up the convergence grid

3 on the remote will change the color to adjust from red to green to blue(do not adjust GREEN)


You navigate the grid with 2, 4, 6, and 8 buttons.

To stop the cursor from blinking so you can adjust at any point use the 5 button—to move again use the 5 button.


When you finish you exit by hitting 7 on the remote again.


Sometimes you have to try a few times to get into the menu—I have had my problems but once in it is easy.


Let me know if this information was helpful and if you have ANY questions or need advice let me know.

SD TECH


Sep 25, 2009 | Toshiba TN55X81 55" Rear Projection...

1 Answer

Service code needed to complete convergence adjustments


I have the service convergence code: mute-1-8-3 (make sure your tv is on and set to antenna. if it doesn't work press S. Mode and make sure is says standard then re-enter code.

So, I have the code but I need the convergence chips. Where did you get the convergence chips?

Jan 26, 2009 | Samsung HCM653W 65" Rear Projection...

1 Answer

Corner convergence for panasonic pt51hx40c projection tv


Yes there is a Service Code you need in order to set convergence and on this set it is not easy to enter! 1) Switch Antenna to cable (2) Set Sleep Timer to 30 mins,Exit menu Enter ch 124 (3) Now Press vol- on front of TV / A red CHK should appear on screen / NOW enter menu and turn sleep timer off / Exit again,now Press Power untill you see 0V00 press ch up untill you see 0V1 Then Press vol+ you should now have convergence Pattern on screen. To adjust use (ch- ch+ and vol- vol+) (cursor) moves to where you want to adjust (mute) locks place you want to adjust RTune changes R-G-B when done make sure you Save adjustments.

Jan 04, 2009 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

Toshiba 42h82


1. ENTERING TO SERVICE MODE
MUTE
S
(Service mode display)
3) While pressing the MUTE button,
press MENU button on TV set.
2) Press MUTE button
again to keep pressing.
1) Press MUTE button twice
on Remote Control.
2. DISPLAYING THE ADJUSTMENT MENU
1) Press MENU button on TV.
Adjustment mode
Press
Press
Service mode
Item
S Data
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF: TV (ANT)/VIDEO button (on TV)
Selection of the adjustment items : Channel s/t (on TV or Remote)
Change of the data value : Volume s/t (on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : RECALL+Channel button on TV (s)
Initialization of the self diagnostic data: RECALL+Channel button on TV (t)
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“SCNT” selection : 4 button
“SCOL” selection : 5 button
“TNTC” selection : 6 button
Convergence adj : 7 button
Self diagnostic display : 9 button

Oct 21, 2008 | Televison & Video

1 Answer

Convergence adjustment @ 52MH84


press mute on the remote then while pressing mute press menu on the set.then you navigate with the instructions below.
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
Screen adjustment mode ON/OFF: TV (ANT)/VIDEO button (on TV)
Selection of the adjustment items : Channel s/t (on TV or Remote)
Change of the data value : Volume s/t (on TV or Remote)
Adjustment menu mode ON/OFF : MENU button (on TV)
Initialization of the memory (QA02) : RECALL+Channel button on TV (s)
Initialization of the self diagnostic data: RECALL+Channel button on TV (t)
“RCUT” selection : 1 button
“GCUT” selection : 2 button
“BCUT” selection : 3 button
“SCNT” selection : 4 button
“SCOL” selection : 5 button
“TNTC” selection : 6 button
Convergence adj : 7 button
Self diagnostic display : 9 button

Jan 21, 2008 | Televison & Video

1 Answer

Convergence settings


7 8 9 to select R G B, 4 to select moving part a line, full line or the whole matrix. S.mode to save your setting. Adjusting using arrow keys.

Nov 08, 2007 | Samsung SP42P2S Television

1 Answer

Convergence


Replaced convergance power packs (2) stk392-110 check all 2watt resistor the packs, to enter the convergance alinment mode on the set. Using the remote control press and release the sleep timer button when sleep timer displays timer equals zero immediately press the display and V. status buttons at the same time.  If done quickly enough the service menu will appear once entered the careful not to does disturb or change any other settings press the number seven to enter the convergence alignment mode a full crosshair pattern will appear in this alignment mode you can adjust the blue and the red to line them on the green using the select and the number pad you can move to the next crosshair to align the boot to the green and then the red to the green when done pressing the muting button on the remote control will save your changes will take a little while to figure this out as you work with.  If you make an unwanted error pressing exit without hitting the muting button will restore your convergence to its previous  setting.  If you're green is off after entering the service mode press the number six on your remote control in this setting will be able to adjust the green only once that is done us the muting button.  Then enter button seven if need be to adjust the blue and the red.  Remember no changes have been stored until the muting button is pushed open this helps.

Oct 14, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Samsung HC-P4752W 47" Rear Projection HDTV-Ready Television Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75311 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...