Question about Panasonic PV-C1320 13 in. TV/VCR Combo

1 Answer

Play games on tv

What channel do I need to have the tv on to play game on tv.

from front video ,audio jacks in front. also I lost the remote

so can I get their from here

Thanks Stan Gilman

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 93 Answers

Go to channel 1 if there is no audio/video switch or you can use the rf mudulator

Posted on Nov 07, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer



Audio and Video Front Inputs are available

for a quick connection of a VCR, to playback

video from a camera or attach a gaming

device. Use the AV button on the remote control

to tune these inputs.

1 Connect the video (yellow) cable

from the Video output on the Camera

(or accessory device) to the Video (yellow)

Input located on the FRONT of

the TV.

2 For Stereo Devices: Connect the audio

cable (red and white) from the Audio

Left and Right Outputs on the Camera

to a Stereo to Mono adapter. Then plug

the single end of the adapter to the

Audio In (white) jack on the FRONT

of the television.

For Mono Devices: Connect one end

of the audio cable from the Audio Out

jack on the device to the Audio In
(white) jack on the FRONT of the television

3 Turn the TV and the accessory device


4 Press the AV button on the remote

control to tune the TV to the side input

jacks. "Front" will appear on the TV


5 Press the PLAY  button on the

accessory device to view playback, or

to access the accessory device (camera,
gaming unit, etc.).

Repeatedly pressing the AV button on the

remote control will toggle the picture source

from the current channel, or Front input


Note: The Audio/Video cables needed for

this connection are not supplied with your

TV. Please contact your dealer or Philips at

800-531-0039 for information about purchasing
the needed cables

Jan 06, 2011 | Philips 20PT633R 20" TV

1 Answer

Picked up old GE 27GT277 tv to use in childs room for games. Can not get tv to recognize game system. There was no remote with the tv, is this required to use the system. There are ports on the front of...

The tv takes the signals thru the RCA jacks. red, white and yellow.

The button you need to hit to see the game system should be labeled 'input'


Nov 28, 2010 | GE 27GT277 27" TV

1 Answer

I cant hook up the red,white, and yellow wires to my magnavox tv

If you mean that the TV doesn't have a set of composite video/audio jacks, then you need a converter for the inputs on the TV. (Most likely you need a video converter (RF modulator) that converts the game console composite video to RF (coax) and set the TV to channel 3 or 4 usually. RF modulators are available from stores like Radio Shack for $30.)

If you have a TV with a composite video input and can't get the game console to view, then there is a different problem. First try new cables. Switch your input as needed for both the TV and the game system. This will depend on the TV and if you have the original remote/unlocked front panel buttons on the TV or a substitute remote that maintains all of the features of the original remote. On some TVs you can cycle through to the A/V inputs by increasing (or decreasing) the channels until you are between channel 2 and the highest available channel. (This doesn't always work if the TV has been programmed to skip channels that previously had no signal.) Otherwise look for a Source or Input button on the remote or TV (or an OSD menu (sub menu) that lets you change the source).

I hope this helps.

Cindy Wells

Aug 10, 2010 | Video Game Consoles & Games

1 Answer

Sylvania 6420FF TV - SELECTING AUDIO/VIDEO INPUT w/o remote

During a recent move the remote was lost. I have the 6420FF in my son's room and trying to set up dvd and wi console set up, but cannot adjust tv via menu button on tv. Is there any way to set-up game system and/or dvd without remote?

Jun 13, 2009 | Sylvania 6420FB 20" TV

1 Answer

Is it working????

you will have to select the video channel source for the TV, usually like av1 or av2 or something like Video 1 Video 2, channel 3 only works with RF switches it wont work with RCA jacks. there should be a video source button on the remote, if you lost your remote then try pressing channel down it usually comes before channel 2, if it dont show up then you will have to press the video or source button in the remote.

May 11, 2009 | Nintendo 64 Console

2 Answers

Lost remote

I just purchased one of these televisions and it didn't come with a remote. However, a Philips Universal Remote (SRU2103/27)
with a code 0520 works fine. I haven't explored all the codes but I can easily change from tv stations to Video 1 and Video 2 merely by pressing the "Input" button on the remote. Another reply mentioned using a duraband model instead of Emerson and it worked for him.

Apr 20, 2009 | Emerson EWF2006 TV

1 Answer

Rca tv model f35673mb - lost remote.... switch to video ???/

I asume your game systems and dvd player are hooked up via the rca inputs.So all you would need to do is purchase a universal remote,program it for your tvand press ch00 which should be the video input.make sure your dvd or game system is on so you know if you are on the right channel

Nov 09, 2008 | RCA F35673MB 35" TV

1 Answer

Sylvania tv input channel with dishnetwork remote

The remote control has a "Game" button, which is how you select the external input. Since you don't have a remote you can select game mode via the front panel Menu button:

1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.

GAME MODE: Set to the most suitable position for TV
GAME. [+] : ON [ - ] : OFF

This will place your TV into Game mode and use the front panel video/audio jacks.

Here is a link to download the user guide:

Just enter your model number.

Please let me know if you have any questions.

Good Luck!

Mar 21, 2008 | Sylvania 6427TE 27" TV

4 Answers

Daewood input w/out remote

Change channels manually on front and go below channel #1 and then it should say "video" 1 or "Aux". Hope that helped you. Have a great day. Jay

Jan 30, 2008 | Daewoo DVQ13H1FC 13 in. Combo

1 Answer

Aux channel

Press channel down until you get to channel 1 then press channel down one more time ,this should give you your AUX.If it doesnt try going into the menu and doing an autoprogram with the video game hooked up and turned on.

Nov 08, 2007 | SansuiM1315 TV

Not finding what you are looking for?
Panasonic PV-C1320 13 in. TV/VCR Combo Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts


Level 3 Expert

5318 Answers


Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75025 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides