Question about Print Servers

1 Answer

Printer Problem My printer won't print.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers
Re: Printer Problem

Model number and operating system is required to be of any assistance.

Posted on Oct 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Mg 5220 wont print now.

My printer drypro model 832 is giving me an error 4122 what should i do the hospital is stuck,my email address is please help.

Jun 29, 2013 | Print Servers

1 Answer

My Status light is blinking, red orange, green and It won't stop

This just happened to me! I found this fixya and it didn't help me. So I checked the status of the printer and it was trying to print some 3,000 envelopes, OOPS!!! Needless to say I cancelled the job but it still had to go through all of the pages before cancelling and finally stopped blinking!

Jul 18, 2012 | Brother HL-5370DW Duplex Wireless Laser...

1 Answer

Keyspan's drivers won't work on Win7 . . . Install MS's Virtual PC. Add usbd.sys to windows/system32/drivers (virtual box doesn't think it needs to load the virtual usb drivers, so i

1. instal server utility on Windows 7
2. right click icon choose properties
3. select compatibility tab choose vista sp2
now run it and presto......

regards, dean

Jul 06, 2012 | Keyspan USB Server US-4A (d47710) Print...

1 Answer

I have print server d-link dpr-1020 connected to laser printer hp P1006. My PC is running under windows 7 Pro. Print server is connected to linksys wrt120n router by cable. My PC is connected to the...

Hi, to make sure your printer is online. Please do these steps:

? On your windows 7 computer, please go to control panel and click printers and faxes.
? From printers and faxes, you can see your printer icon, right click the printer icon and select online.
? Try to print and that should be working.

Nov 05, 2010 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

My print server is working with a Epson DX4400. It is all setup correctly (according to Netgear) but when I print wirelessly, it only prints half the test page and then the printer stops with an error...

U need to manually add the Printer ports ..

Install the printer driver to the computer first and make sure that we are able to print directly. Follow the steps below after putting the printer and computer back to your network.
  1. Click on Start, then Control Panel, then Printers and Faxes. Right click on the Printer and select Properties.
  2. On the printer properties window, select Ports tab and click on Add Port.
  3. Select Standard TCP/IP Port and click on New Port
  4. This will bring the Add Standard TCP/IP Printer Port Wizard, click Next
  5. In the field for Printer Name or IP Address, type the IP address of the print server and click Next
  6. Select Custom and click Settings button
  7. Under Protocol field, select LPR. For Queue Name, type P1 depending on what print server port is the printer connected to.
  8. Click Ok, then Next, and Finish.
And this will resolve the issue

Feb 06, 2010 | NetGear WGPS606 (WGPS606NAR) Print Server

2 Answers

HP laserjet P1005

Go to the printer properties, you can go from Start-->Printers and Faxes. Select the printer (it should say something like, HP LaserJet P1005 on DPR1260 ..... make a double click on there. Then select Printer -----> Properties. Then go to Ports, and DE-SELECT the box that says: Enable bydirectional compatibility. IT SHOULD BE NOT SELECTED. Then Select Apply, and then Acept. After doing this, the printer should start working.

Mar 04, 2009 | D-Link RangeBooster G DPR-1260 (DPR1260)...

1 Answer

Adding a second printer to a d-link priter server

You need to connect the second printer to your print server then install the printer driver to your computers. If your print server has a printserver driver, run that so it will automatically find the new printer for you.

Jul 28, 2008 | D-Link DPR1260 Rangebooster G...

4 Answers

HP LaserJet 1018 & DP-G310

Does your network have a dedicated computer server and the printer is attached to this server or is the printer attached to a dedicated print server device?
Does a computer on your network shares its printer with other computers on your network?
There is insufficient information on how you configured your printer setup for me to give you a proper answer to your problem.

Jun 10, 2008 | D-Link Air Plus DP-G310 (dpg-310) Print...

2 Answers

Wont print

check to make sure that you are selecting the right printer to print from.

in the print box locate the model name of your printer before printing

then lastly is your printer peaking up paper?

Apr 23, 2008 | Linksys Wireless-G WPS54G Print Server

Not finding what you are looking for?
Print Servers Logo

Related Topics:

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Print Servers Experts


Level 3 Expert

18258 Answers

old marine
old marine

Level 3 Expert

1301 Answers

Cindy Wells

Level 3 Expert

4721 Answers

Are you a Print Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides