Question about Car Audio & Video

2 Answers

Car stereo not working

Ive fitted my car stereo and it lights up for about a second then goes off the screen doesn't light up or anythink what can i do to resolve the problem?

Posted by on

  • kingsnake198 Jun 02, 2008

    when i turn the ignition on thecar stereo power comes on and it works fine but as soon as i turn the car over it shuts off and won't come on all wires seem to be connected there are wires i can swap for the live and not live, i've tryed swapping these but still the same happens where would the fuses be if not in the stereo or in car fuse box

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I know for a fact what the problem is for this. I experienced the same exact thing. I have a xo vision 334gt i love it soooooo much. Anyways you have to un hook the (Solid)ORANGE wire form the unit and the harness. Trust me i been working on mine for 3 hrs now and finally found out what the problem was. Remember un hook the Solid Orange Wire.

Posted on Oct 06, 2008

Ad

Make sure its connected to a proper live supply, also u could try checking the to see if the right fuse is in to power it. i had the same problem

Posted on Jan 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Landcrusier 79 series 2006 model. keep blowing the tail light fuse after i hooked up a stereo. any ideas?


Locate the LIGHT + lead on your radio.
Do you best on finding the factory LIGHT + lead.
Use this old lead to trigger night lamination on your new radio.

If you can not find this lead then look for closest interior night lamination and tap into that positive lead.

Mar 01, 2013 | Toyota Vehicle Parts & Accessories

1 Answer

Horn and brake lights


This happend when you put a new sterio? Now your horn and tail lights dont work. Well some models require and extra harness to make the after market sterio work, check in to that. Or a fuse, make you where the wire is and trace it to see if it goes to the radio

Feb 27, 2013 | 1993 Geo Tracker

1 Answer

I have a toshiba qosmio f25-av205, when you start it up the screen showes for about 15 seconds then goes dark, can see the screen on external monitor. Can also see it very faint on screen at same time. ...


In my experience, if a back light goes out, it doesn't work at all. Since yours works for a short time before going dark, I'd say that it's your inverter that's faulty.

May 08, 2011 | Computers & Internet

1 Answer

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see.

Jul 21, 2009 | Dell E173FP 17" LCD Monitor

2 Answers

Peugeot 307


having same problem. faulty after disconection of battery

Jun 03, 2009 | Blaupunkt Car Audio & Video

1 Answer

Kenwood kvt-617 ain't working


Look for a small hole in the face plate. Put the head of a pen in it for a few seconds and re-set the system. This should work...

Nov 04, 2008 | Kenwood KVT-617DVD Car DVD Player

1 Answer

Will not charge or switch on


Mine had the same problem, it turned out to be the PCB, which Vodafone replaced. The phone now works, but won't play mp3 except those originally on the memory card, and very tiny mp3 ringtones.

If your phone is not under warranty, i would think that it would be very expensive to replace the PCB, and probably not worth your while.

Sep 04, 2008 | Sharp 903 SH Cellular Phone

1 Answer

Power issues


It sounds like you are drawing to many amps and you need to go to a higher capacity altinator and a second battery would be a good idea as well. Start your car (do it at night makes it easier to tell) turn on your headlights without your stereo on look at head lights and see how bright they are then slowly turn stereo on and up if headlights dim you are drawing to many amps and need a higher capacity alt to charge and stop you from blowing them, and second battery with and isolator so you don't draw amps from the battery that starts your car.

Jul 23, 2008 | Rockford Fosgate 800.2 Car Audio Amplifier

2 Answers

Lighting problem JVC KD-LH2000


If your unit is a "flip face" design then I would suspect that the flat ribbon cable that goes between the flip face and the main board has lost at least one of the leads and that the cable needs to be replaced. Try Partstore.com for a replacement. Good luck.

Jan 21, 2007 | JVC KD-LH2000 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

781 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4981 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...