Question about Avaya Corded Phone avaparp18d

Open Question

Short beeps, the phone is not ringing and it goes to a prerecorde

Short beep when the phone rings than it goes to a prerecorded message. How do you reprogram the phone, I pulled the power last night and have a messed up business phone, HELP!

Posted by on

  • Anonymous May 11, 2010

    If you have a Partner phone system, you probably erased the power when you unplugged it. The older Partner II and Partner Plus' had an internal battery that was bad. The newer Partner ACS', had 2 AAA batteries in the processor.

    Either way, we need way more info to program the system. What release processor and what card models are in the system in the correct order, and if the voicemail is a stand alone unit, we need to know how many phone cords are going from the phone system into the voicemail.


  • Vitaly Kagan
    Vitaly Kagan May 11, 2010

    How many times it was ringing before?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY PHONE only rings 3 times no matter what, when people leave message I can not retrieve it, and the message allert light flashes continuely. just put new batteries in all phones. 3


you can alter the number of rings before it goes to answer machine
set the answer machine up properly and when a message is recorded , the alert light will flask every so many seconds along with a short beep
set it as per the user manual and if you don't have a manual then down load it from the manufacturers site on the net

Jan 20, 2016 | Lands Phones

1 Answer

How do i record a greeting message?


First of all, here is the main ONLINE SUPPORT page for your model:

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Telephones/Expandable-Systems/model.KX-TG1033S


And here is a direct link to the ONLINE USER'S MANUAL for that model:

http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf


To view the Support Page or the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.

See page 26 of the manual for detailed instructions on how to operate the answering system on your phone.

Basically that section of the manual reads as follows:

Greeting message

When the unit answers a call, callersare greeted by a greeting message.
You can record your own greeting message or use a prerecorded greeting message.

Recording your greeting message.

You can record your own greeting message (max. 2 minutes and 30 seconds).
If you do not record a greeting message, a prerecorded greeting message is used.

1 Press the MENU button.

2 Scroll to ANSWERING DEVICE using the up and down arrow keys and then press OK.

3 Scroll to RECORD GREETING then press OK.

4 After the handset beeps, speak clearly about 20 cm (8 inches) away from the microphone.

5 To stop recording, press the OK button.

6 Then press the OFF button.


Using a prerecorded greeting message.

If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages.


Playing back the greeting message.

1 Press the MENU button.

2 Scroll to ANSWERING DEVICE using the up and down arrow keys and then press OK.

3 Scroll to PLAY GREETING then press OK.

4 Then press OFF.


I hope that was helpful to you, good luck and take care.

Joe.

Aug 13, 2011 | Panasonic KX-TG1033S Cordless Phone

1 Answer

How do I change the greeting message?


You can record your own greeting message (max. 2 minutes) that is played when the answering system answers a call. If you do not record a greeting message, a prerecorded greeting message is used. 1 {GREETING REC} 2 Within 10 seconds, press {GREETING REC} again. 3 After the base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC. 4 To stop recording, press {STOP}.

Mar 08, 2011 | Panasonic KX-TG5632 Phone

1 Answer

How do i record my personal greeting on answer machine model ATT 1717. I am only able to get the prerecorded greeting. Thank you charlene


I hope this helps you:

Recording Your Announcement

Before using this answering system, you

should record the announcement (up to

one minute long) that callers will hear

when the system answers a call. If you

choose not to record an announcement,

the system answers with a prerecorded

announcement: "Hello. Please leave a

message after the tone."

1 Press and hold annc/skip. The system

beeps. Speak toward the microphone

normally, from about nine inches away.

While you are recording, the Message

Window displays -.

2 To stop recording, release .annc/skip

The system automatically plays back

your announcement.

To review your announcement, press
and release .annc/skip

You can get a copy of your 1717 manual at this web site:
http://www.retrevo.com/samples/AT%26T-page-2-manuals.html

Hope this helps. Good Luck, Barb

Feb 20, 2011 | AT&T 1717 Digital Answering Machine

1 Answer

My answering machine message is out dated and needs to be changed how do you do it?


Recording your greeting
message
You can record your own greeting
message (max. 2 minutes). If you do not
record a greeting message, a
prerecorded greeting message is used.
1 {GREETING REC}
2 Within 10 seconds, press
{GREETING REC} again.
3 After the base unit beeps, speak
clearly about 20 cm (8 inches) away
from the MIC.
4 To stop recording, press {STOP}.

Feb 11, 2011 | Panasonic KX-TG6021M Cordless Phone

1 Answer

How do you set up the message for the answering machine? Lost the instructions that came with the unit. I know the phone has a menu, but not sure if this is where I would program the answering machine.


Greeting message
When the unit answers a call, callers
are greeted by a greeting message. You
can record your own greeting message
or use a prerecorded greeting
message.
Recording your greeting
message
You can record your own greeting
message (max. 2 minutes and 30
seconds). If you do not record a
greeting message, a prerecorded
greeting message is used.
1 {MENU}
2 {V}/{^}: “Answering device” i
{OK}
3 {V}/{^}: “Record greeting” i
{OK}
4 After the handset beeps, speak
clearly about 20 cm (8 inches) away
from the microphone.
5 To stop recording, press {OK}.
6 {OFF}
Using a prerecorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a
prerecorded greeting message for
callers and ask them to leave
messages.

Sep 11, 2009 | Panasonic KX-TG1033S Cordless Phone

2 Answers

Phone beeps constantly when on and also when talking on it. Under tools - Voice Memo I have kept a message from July 2008. Would this by the reason?


hi im josh in cebu phils. may i help you? Friend if the phone costantly beeps. The problem is in your phone and not the voice memo you have save. Here the possible reasons why your phone beeps.
1. Sad to say common for the wet phones because when it is wet the mainboard or the circuits become shorted and thats why it beeps. It beeps because I.C. on phone have already software the detects maiboard or IC discomfort thats why it gives a signal in a form of beeps or rings.
2. Your software is corrupted or the memory is full.
3. the battery is weak when the current supply it not enough the hardwares may suffer discomfort thats why it beeps
Solutions
1. To wet units let the mobile phone service center clean the entire phone.
2. Try to re flash, reformat or reinstall your mobile software.It can be done by the service center.
3. Replace the battery or have it fully charge always.
Friend thats all base from my knowledge as a mobile phone techincians for long time. good luck

Mar 10, 2009 | Cell Phones

1 Answer

I can't remember how to record my outgoing message ?


here you go...

Recording your greeting
message
You can record your own greeting
message (max. 2 minutes and 30
seconds). If you do not record a
greeting message, a prerecorded
greeting message is used.
1 {MENU}
2 {V}/{^}: “Answering devicei
{OK}
3 {V}/{^}: “Record greetingi
{OK}
4 After the handset beeps, speak
clearly about 20 cm (8 inches) away
from the microphone.
5 To stop recording, press {OK}.
6 {OFF}


If this helps you solve it, plz rate this fixya. Thank you kindly.

Feb 01, 2009 | Panasonic (KX-TG1032S) Phone

1 Answer

Help


Remote ring detection provides a low tone * triple beep in your wireless headset when you receive an incoming call. This feature requires a handset lifter accessory, such as the Plantronics HL1 or HL10. If you do have a handset lifter but do not hear the remote ring detection, please check the following:

  • Check the placement of the lifter. - Make sure the handset lifter positioned directly over the phone's speaker.

  • Try adjusting the phone's ringer volume. If the phone's ringer is too quiet, it may not trigger the ring detection built into the lifter. Try turning up the ringer volume of your phone.

  • Check the ring tone of the phone. - If your phone's ring tone provides short beeps or plays music, the lifter's microphone may not detect it. Try switching your ring tone to a traditional ring or long beep.

  • Does the phone have different rings? - For example internal calls vs external calls vs transferred calls. Does the phone ring the same for each type of these calls. If so try changing so all calls use the same tone.

  • Attach the optional "external ring detector" cable. This cable plugs into the lifter and provides a small, black microphone. It is included in the plastic bag of lifter accessories. Mount the microphone near your telephone's speaker. Click here for more details.

  • There are 2 versions of the Lifter accessory - HL10 and HL1. The HL1 is a larger older version of the liter with a more sensitive rind detector. Some phones will require the older version of the lifter.

  • Please view the On Line Compatibility Guide to see if the older version (HL1) will be required for your phone.


*Please note the volume of notification beep in the headset cannot be altered, it will always be a low tone triple beep .

Jan 15, 2008 | Plantronics CS50 Wireless Office Headset...

Not finding what you are looking for?
Avaya Corded Phone avaparp18d Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Lands Phones Experts

george  peters
george peters

Level 3 Expert

860 Answers

kakima

Level 3 Expert

102366 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you an Avaya Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...