Question about Kenwood KDC-W5534U CD Player

2 Answers

Connecting to the AUX input. Hard and software

Connecting to the AUX input. According to all descriptions, on the box and in the list below, the KDC-W5534U has an aux-input. On the device I find a REAR and FRONT, without IN or OUT. In the manual it mentions All connections to be OUT. Conncting the device to eighter does not work. The Source-select does not change to AUX eighter. Please help. The kids want their movies with sound :)
Regards, Alfred Boekwijt, Holland

Posted by on

  • alfred372 May 09, 2009

    Hello POB-H,

    Thanks. I need to be more specific. I have an DVD player in the car with audio-out Red White. I want to use the car stereo KDC-W5534U as a simple amplifier. It should have the aux-in option, but I can't find it in the menu of the player to activate the AUX-IN. Also, the manual mentions the option, but it never shows.

    Thanks again for the fast answer.

    Regards,

    Alfred

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 909 Answers

You are connecting a cd PLAYER to an AMPLIFIER of some sort?
The rear connecters are audio/video out (red/white audio L/R and yellow is video) i assume rca connectors (phono)
The sound should be on for those connectors all the time, so no need to switch to audio out.
You connect to Aux in on the amp. and select Aux on that (amp meaning amplifier or stereo unit with aux in)
I hope this helps.

Posted on May 09, 2009

  • Paul Hutchinson May 10, 2009

    Oh! well there will either be a pair or rca (white/red) leads or sockets at the back or a 3.5mm jack on the front or side, I am unsure of that particular model but quite often they are situated in the hinge for the screen on the side.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Most kenwoods have a "din" connector on the back that require a special adapter or open the radio and solder wires to what ever pins that are - and ground

Posted on Feb 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the aux port on the right side of the glove compartment in a chevy uplander 2007? It is also hard to pull, will it break?


About 23,400 results (0.81 seconds) Search Results

    Plug in glove box?? ' VW TDI forum, Audi, Porsche, and Chevy Cruze ...

    www.myturbodiesel.com/threads/plug-in-glove-box.16414/

    Oct 22, 2012 - 17 posts - ‎8 authors
    Asked vw and they said it is a iPod/mp3 player port. Plugged in ... 06 jetta tdi and there is a plug in my glove box that looks like a headphone jack. Asked vw ... Joined: May 23, 2007 ... Try pressing CD twice to go to aux input .... box. It is locateded on the farright side where the light is on most mk5 models.Missing: uplander

    Head unit "Aux" input information... - Suzuki Forums: Suzuki Forum ...

    www.suzuki-forums.com/.../14338-head-unit-aux-input-information.htm...

    Jun 28, 2006 - 10 posts - ‎5 authors
    This cable gives you an AUX input into the stereo, so you can listen to ... There is a plastic damper attached to the right side of the glove box (a ...Missing: uplander

    [PDF]Get To Know Guide - Chevrolet Owner Center

    https://my.chevrolet.com/.../2007/chevrolet/uplander/2007_che...

    ChevroletR. Glove Box. Getting to Know Your. Uplander. 2. See Section 3 of your Owner Manual. Instrument Panel. DRIVER INFORMATION. Uplander 2007 A 7/24/06 ...

    Only Driver's side speakers working when using the aux input on

Feb 03, 2016 | 2007 Chevrolet Chevrolet Uplander

1 Answer

Why? no sound from the speskers at all.


There are a few things that could cause no sound and although some are obvious I'll got through them all..

1) Sound is on Minimum

2) Sound is Muted

3) No Power to Subwoofer

4) Speakers connected Incorrectly or Faulty

5) No AUDIO IN connections to TV-IN or AUX-IN

6) Incorrect Input Source is Selected (See Below)


Connecting audio from TV

When connecting the audio output from your TV to this Home Theater Audio System, you will have the sound of the

TV output on all the speakers. It will enable you to enjoy the multi-channel surround sound capabilities.


Use an audio cable (red/white - not supplied) to connect the TV IN jacks on this DVD system to the AUDIO OUT

jacks on the TV. To listen to the sound, press TV on the remote control as the sound source that you want to play.


Connecting audio from an audio/video device

This DVD system provides analog and digital audio connection. You can connect the audio output from an

audio/video device (e.g. VCR, Cable/Satellite Box) to this Home Theater Audio System in order to enjoy the

multi-channel surround sound capabilities.

Use an audio cable (red/white - not supplied) to connect the AUX IN jacks on this DVD system to the AUDIO OUT

jacks on the connected device. To listen to the sound, press AUX/DI to select "AUX" as the sound source that

you want to play.

Or

Use a coaxial cable (not supplied) to connect the DIGITAL IN jack on this DVD system to the DIGITAL OUT jack on

the connected device. To listen to the sound, press AUX/DI to select "DI" as the sound source that you want to play.


Please leave feedback

Cheers

Andy

Apr 27, 2011 | Philips HTS3450 System

1 Answer

I have rca STB7766G1 converter box can I connect my dvd player


Trial and error. There is no list of products that will work together and how, so when you have situations that come up such as these you have to connect the electronic devices and see what happens. What's worse is that the combination will not always work with the same brands and even if you do get this to work today it might not work tomorrow.
Ok connect the DVD player to the television. Where it says out on the DVD player you connect the connecting cables either yellow, white, and red or green, blue, red, white, red. You connect the other end of them to the television. Put the television on the correct input. Try playing a movie to make sure the dvd player and television are connected properly.
Ok now where it says IN on the DVD player. Connect a yellow, red, and white cable. The other end of that cable connects to the converter box where it says out.
You can also connect the converter box and the dvd player in this way if applicable. If the dvd player has an RF (coax) IN connect a coaxial cable there and connect it to where it says OUT on the converter box.
Then you connect an antenna to where it says ANTENNA IN on the converter box. Now you will have to be able to put your dvd player in input (aux) or turn it to channel 3. You will always leave your dvd player in input (aux) or on channel 3. You will only change channels on the converter box with its remote control or the buttons directly on it. Good luck!

Apr 23, 2011 | Televison & Video

1 Answer

I just bought a samsung home theater in a box system, model Ht-D5500. And i also have a hd cable box. i was wondering how can i connect my cable box up so that i get audio from the speakers instead of the...


There are two ways of connecting to get cable TV audio from your Home Theater System.
1) If your HD cable box has a digital audio out ( either optical or coaxial ) you can connect this to the Samsung Home Theater Systems digital input. While watching a TV channel scroll through the Samsungs input ( source ) selector till you hear the sound. Remember to mute the TV sound while you are doing this.Most probably it will be the CBL/SAT input or Video AUX.
2) If your HD box does not have digital audio out you can connect the Red & White audio out of the same to your Samsungs Aux or TV or Video audio inputs . Ignore the yellow socket and connect only the Red and White audio inputs.For getting Video through the TV connect the HD box to TV via HDMI cable or connect the Yellow video out to the TV's Yellow video in. I am sure it is already connected .

Mar 21, 2011 | Audio Players & Recorders

1 Answer

Tell the difference between the Aux input and V-Aux input


'Aux' is a general label for any Line Level analog stereo input like DVD, VCR, TV, DBS, etc. They are usually electrically identical and interchangeable except for PHONO.

V-Aux on this unit is on the front panel for conveniently connecting a video device. It has analog and assignable digital audio plus S-video and composite video.

There is nothing labeled 'Aux' on this unit.

Feb 16, 2011 | Denon AVR-2807 Receiver

1 Answer

I cannot get the surround sound to come on tv mode on my friends RCA DLP. Any suggestions? is this a t.v. issue? DVDs and Ipod connections are fine.


The tv must have a stand alone audio output that you would connect the audio composite cables to going to the aux or audio input of the surround sound system. You may need to switch the surround sound system to aux mode or av input 1 or 2 and etc. If you are connecting a cable box or satellite tv box to this television instead of connecting the audio composite cables between it and the tv, connec them between it and the stereo surround sound system.

May 05, 2010 | Zenith XBV441

1 Answer

Doesn this unit have a AUX input in the back?


no its on the lead that is supplied with the stereo

Nov 01, 2009 | Sony CDX-R3000 CD Player

5 Answers

Just installed kdc W3537 but cant figure out how to make it work with aux lead?


I've had the same problem myself but just fixed,firstly you take your instuction manual to a well ventilated area and set fire to it.Second you put your stereo in stand-by,then press and hold the menu button,and beep on or off will be displayed.Third you move the control stick situated on the right up or down until aux is displayed then just move stick left or right and it will show ...aux off...aux 1...aux 2.Choose aux 1 and away you go

Jun 17, 2008 | Car Audio & Video

1 Answer

I have a Kenwood KDC MP2035, it is brand new, I try listening to somehting plugged into the AUX but when i press SRC to select AUX, AUX does not show up, only TUNER and STANDBY are in the options so far


here is some thing that will help u out. AUX Input: The KDC-MP2035 is equipped with a front panel 3.5mm minijack auxiliary input for connecting external portable audio devices such as an MP3 player or Tape walkman. The receiver allows you to select between the following AUX settings.
  • Off: the source button does not scroll through the AUX input when function is turned "off"
  • Aux 1: turns on the AUX input for use
  • Aux 2: turns on the AUX input in the attenuator mode - press the attenuator button to activate sound. pleas let me no if i can help any more and dont be afraidto rate me i dont bite lol just kidding

Apr 09, 2008 | Car Audio & Video

Not finding what you are looking for?
Kenwood KDC-W5534U CD Player Logo

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4869 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...