Question about One For All URC-3021 Remote Control

1 Answer

Dont no if you got my email lost book in moving to California

My name is Kenny Wicks and i need your help I just lost my leg in a car reck sinse I moved here. I need codes to work my{ tv/cbl-sat/dvd-vcr/audio } all work off my one remomte I pray you can help I need all the help i can get at this time anyway its A Sharp Aquos { GA535WJSA } So if you can help A guy with a little bad luck I would be so indeted to you if that can hapen I thank youif you can send a coppy to my email thank you Kenny Wicks And God bless Ps this is my nick name from back home Kansas that is my email name that is i have wenierwayne@gmail. aswell Thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 909 Answers

Visit www.oneforall-int/?pag=54
on this site you can pick your remote, then you follow the on screen guide to find your codes.
I just tied it and took 10 seconds for a list of sharp codes.
I hope this helps my friend.

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IVE GOT THE CODE, NOW HOW DO I PROGRAM IT? CANT REMEMBER THE PROCESS AND STEPS?


Hello April,

1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., VCR/PVR,
DVD,CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume,and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer's Codes (starting on page 36) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes:
VCR/PVR Code:
Device Type:______________
DVD Code:
Device Type:______________
CBL/SAT Code:
Device Type:______________
TV Code:
Device Type:______________



You can rate my answer if you appreciate my help.

Thanks!

Oct 17, 2011 | One For All URC4220 Remote Control

1 Answer

Hi my samsung remote is damaged.I have a one for all tv universal remote & have lost the instuctions to program the remote to the tv. I need the instructions program my one for all tv remote to my...


Hello
These are the programming proceedings for a one for all universal remote control.

[1] Turn on a desired device (e.g.,VCR or

DVD player) and, if applicable, insert
media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding.Highlight or write down the

codes and device you wish to program before
starting step 2.

[2] On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).

NOTE: To program control of a cable box or

satellite receiver, press CBL/SAT once.

NOTE: To program control of a CD player or

audio receiver, press AUD once.

NOTE: To program control of a TV/VCR Combo,

press VCR once.After programming, you will be

able to control channel selection, volume, and

VCR functions.

NOTE: To program control of a TV/DVD Player

Combo, press DVD once.After programming,

you will be able to control channel selection,
volume, and DVD functions.

[3] Press and hold SET until the LED (red light)
blinks twice, then release SET.

[4] Use the Manufacturer's Codes to locate the type of device and

brand name and then enter the first fourdigit

code for your device. If performed

correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.

[5] Aim the remote control at the device and

press POWER once.The device should turn

off. If it does not, repeat steps 2 through 5,

trying each code for your brand until you
find one that works.

NOTE: If the device does not have a POWER
key, press the (Play) key.

[6] Repeat steps 1 through 5 for each device you want to control.

OK.


Jul 03, 2011 | Televison & Video

1 Answer

I need help to get a code for my sanyo tv and how to set it up.


Hi
Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page

Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.

Code for sanyo tv is 0154
Thank You

Sep 13, 2010 | One For All URC-3021 Remote Control

1 Answer

I have URC3220 remote and a Magnavox TV How do I program it?


Hi,

PLease follow the steps below

1.Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works.

6.You are set

thanx

Jul 24, 2010 | One For All URC4110 Remote Control

1 Answer

I need a code for my All in one Big Easy remote control.I lost the manual a lon time ago.It has 4 funtions:CBL/SAT---VCR---DVD--TV


available in stores is the universal remote control all models tv,vcr,dvd all. just purchase another its includes manuals and all codes, good day

Jun 18, 2010 | Televison & Video

2 Answers

How can i put the code?


POR FAVOR NECESITO EL CODIGO PARA TV SANSUNG, SIN ESE DATO MI CONTROL NO SIRVE

Mar 19, 2010 | One For All URC-3021 Remote Control

1 Answer

Lost code booklet for my oneforall remote


I can help you with your URC-3021 Universal Remote Control issues.

The codes for Sanyo TVs is: 0154.
The codes for RCA DVDs are: 0522, 0571, & 0717.
The codes for Magnavox DVDs are: 0503, & 0675. These may or may not work with newer Blu-Ray players. Since you have two disc players, you will need to reassign the CBL/SAT key to act as a second DVD key.
I don't believe the URC-3021 stores codes for surround sound amplifiers: it has only three function buttons: TV, DVD/VCR and CBL/SAT.

For complete instructions on entering the URC-3021 remote codes, please refer to my posted Fixya Tip One For All URC-3021 Code Entry.

I hope that helps.
_______________________________________________
Reassign URC-3021 Device Key
Urc-3021 Code List Download
One For All URC-3021 Code Search

Feb 13, 2010 | One For All URC-3021 Remote Control

1 Answer

Need Universal code for RCA remote with Apex DT250 Digital Conver


Use cbl/sat button. Your remote might use more or less than 4 digits. Use 749 or 00749. It'll probably work. It worked for me.

Jul 30, 2009 | Televison & Video

1 Answer

Ph601s universal philips remote it controls 6 devices tv vcr dvd cbl sat cd


I have a sharp a philips dvd a hitachi vcr apinoneer sound system

Feb 09, 2008 | Televison & Video

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74118 Answers

Cindy Wells

Level 3 Expert

5101 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...