Question about HP DeskJet F380 All-In-One Printer

1 Answer

Not printing hi, it was printing great, then stopped. flashing red light. have switched off, took leads out.re connected ,still no good. have docs waiting to print.just flashing constantly and showing red E. help if you can,please. Debs

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 41 Answers

Reboot the computer and the printer..
also try to do a "Print Test Page" by going to Start>Control Panel>Printers and Faxes , just right click on the printer icon(with a check mark on it) and select properties then click on Print Test Page"... if it still does not print, turn off the computer again, unplug the printer from the back of the computer ( I assume it's connected via USB), then plug the printer on a different usb slot on the computer.. you may have to re-install the drivers. make sure you have the cd for the printer.

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What if my uproar wireless headphones are flashing red and blue ?


The headphones flash blue when u switch it on.If it flashes blue and red, it means that it is in bluetooth connection mode.So u can connect it with bluetooth devices by switching on bluetooth on your phone or pc.After connecting the red light stops flashing automatically and blue light starts blinking.Hope you understood. :)

May 04, 2016 | Audio Players & Recorders

1 Answer

Printer suddenly stopped communicating w/Macbook Air. No red light. Same connection always used. Unable to send data to printer


Try plugging in via USB cable. If it prints fine it may be a wifi card in the printer if you having no other connectivity issues with your macbook.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gregg_27a4d257e54e7920

Jan 18, 2016 | Office Equipment & Supplies

2 Answers

It beeps then just shut off. When I try to turn it back on it comes on for half a second then beeps and the light goes from green to yellow to a flashing red, and it shuts off and then just stays...


Hi Uniballer,

Are you seeing any flashing red/yellow lights?

If so this is the red light error and you will find that is why the system will not turn on.

Why Does It Happen?

The GPU and the CPU are the 2 main chips in the system and they deal with all of the number crunching however they can get very hot and if they lose connection the system will either freeze up or turn off and give you the red flashing light.

How To Fix?

The key is stopping the heat build up and you can either send it in and they will fix it for you.

Bear in mind that for the PS3 red flashing light error you will be waiting for about 4 weeks and it will also cost you $150 for the repair bill!

Other Ways To Fix?

You can also use a good PS3 Repair Guide to fix it and this will show you how to stop the heat build up with a few household items.

Just make sure that you get a good guide there are some good ones out there!

Click Here For A Complete Review Of All Available PS3 Repair Guides.

Hope this helps and any questions let me know?

Apr 09, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

At first I thought I only had a burned out drivers' side headlight. I replaced it and it worked. But neither of the two high beam lights work. In fact, when I turn on the high beams, all the headlights...


You have a rusted out ground leads to both front lamps. It may be bad enough rusting up front that effects both fenders. Run some heavy ground wires from negative of battery to both fenders, then tie in the negative lamp leads to the fenders. Might as well make sure the ground connections to everything else are holding up as well. I've added grounds to windshield wiper motors and blower fans that quit working as well.

Aug 09, 2010 | 1987 Chevrolet Nova

1 Answer

Epson r220, power light flashing green, ink light red


Include the printer. Press and hold the buttons STOP, MANITENANCE ("drop") and POWER whereupon switch off feeding.
http://files.mail.ru/N287AI

Sep 24, 2009 | Epson Stylus Photo R220 InkJet Printer

1 Answer

HP LaserJet 4 Printer stopped printing


Try putting a piece of paper in tray 1

Feb 26, 2009 | HP LaserJet 4 plus Printer

1 Answer

Fix my line problem but red LED flashes five times


Hi Guys, Looks like your advise took care of the problem. I adjusted the power knobs for each of the RGB guns on my Sony 51 inch projection TV. The color looks great and I don't seem to have the blinking indicator light bugging me any more. I will be sure to suggest you folks to anyone with these type of technical questions.

GREAT JOB!!

Jan 27, 2009 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...