Question about Smeg 24 in. STX2 Built-in Dishwasher

Open Question

Smeg dishwasher reset button - Smeg 24 in. STX2 Built-in Dishwasher

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1462 Answers

SOURCE: E2 error in smeg dishwasher

e2 is overfill or flooded base.
take the bottom front panel off and see if there is water in it and if so, mop it out. if it reoccurs, then you have a leak.
you will see a float device in the front approx middle and this is what actuates e2. if fault is intermittant, try putting a small weight on this - a washer for example.
if e2 is being caused by overfill and not a flooded base, then the water intake moulding needs replacing

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help my SMEG dishwasher was stuck in a loop and when resetting it was going through the motions like it was trying to drain itself and then finishing the cycle so all 4 lights on the right were flashing...


completely unplug it for several minutes. if you do not have a plug, turn off the breaker to this unit for about 15 minutes. Then turn it back on and see if this resets it. Check for a reset button somewhere under the unit or on the door panel where the control buttons are if this is easier.

Mar 04, 2015 | Smeg Dishwashers

1 Answer

How do you reset a smeg DI612C dishwasher?


Just unplug or kill power for about 10 minutes. see what that does but you may have another issue. see if water fills into unit. Also check flod switch for debris

Feb 17, 2013 | Smeg Dishwashers

1 Answer

Smeg ST660 not starting


Switch the power off. Remove the 'built-in cupboard' panel from the front of the dishwasher and you should see the end of the timer spindle. With the power off you can turn this clockwise using another appliance knob or carefully with pliers. I think one 'start' position is with the flat section below the centre and horizontal. If the two lights are not on then try the 'start' button second from left to advance the timer.

Jan 13, 2010 | Smeg Dishwashers

1 Answer

SMEG dishwasher - cycle buttons


What is the model of the dishwasher? Open the door and look down the right hand side for a sticker and repost please. As a rule number 3 is a normal wash :D

Mar 23, 2009 | Smeg 18 in. DWI410 Built-in Dishwasher

1 Answer

It's stuck on Bio...


Here is the link to the user manual, hopefully this solves your problem else please ask again; http://www.smegtech.com/site/smeg/pdf_libretti/19590097802-GB.pdf Hope this helps :)

Jun 25, 2007 | Smeg 18 in. DWF410SS Slim-Line...

Not finding what you are looking for?
Smeg 24 in. STX2 Built-in Dishwasher Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Smeg Dishwashers Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Cleverer2

Level 2 Expert

298 Answers

paul
paul

Level 3 Expert

822 Answers

Are you a Smeg Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...