Question about Toshiba Satellite A105 Notebook

2 Answers

After CD burning process nearly done write error ruins CD-R disc

After loading the data image and going through the writing process, the CD burning wizard cannot complete the write process due to a write error that shows up at the very end and the CD-R blank is ruined-inaccessible. This problem began when I started using a new batch of CD-R blanks from SONY (700 MB). Using NERO software also gives the same result.
OS:XP
Drive: Matsita DVD-RAM UJ-841-s
Model: Satellite Toshiba A105-S4244











Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Try using sonic DLA for burning. i also encounter problems with toshiba satellite when burning on to disc. i use sonic dla and it finish the burning process with no errors.

Posted on May 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I think u can identify this problem by checking step by step. At first change ur cd brande. If probelm still
then setup windows.. then try to write.

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Plextor PX-820SA DVD-CD internal burner. The drive reads and writes to CD's, but will not read or write to DVD's (I have tried several different types/brands of DVD media). Please...


this might be because you have not selected the option to burn an audio or data dvd or your burning software does not support dvd burning
there are plenty of free burning software programs on the internet

http://www.majorgeeks.com/BurnAware_Free_d5839.html

BurnAware Free is one of the most popular free CD, DVD, Blu-ray Disc burning software available for Windows.
Using this program you can easily create and burn Audio and MP3 CD, Data and DVD-Video disc, ISO and Cue Image,
erase or format rewritable disc, copy your CD or DVD to ISO image.
hope this helps

May 30, 2011 | Plextor PX-820SA DVD±RW Dual Layer Burner

3 Answers

When attempting to burn project in MY DVD8 an error appears 800402007 while encoding. I am therefor unable to burn disc


Generally, defragmenting your hard disk will resolve this issue. To defragment your computer:
  1. Go to Start--> Programs --> Accessories --> System Tools --> Disk Defragmenter.
  2. When the Disk Defragmenter window opens, choose Defragment.


If defragmentation doesn't resolve the issue, burn your project as a data file, and then burn your project as a data disc using Disc Copier or Creator Classic. To create a disc image/data file:

  1. After clicking the Burn button, the Burn Project window opens.
  2. You have two data burning options:
    • Image file - this option will save your project as an .ISO file. To burn this file you will need to use the Burn Image option in Creator's Copy section.
    • Folder Set - burning a folder set will create a Video_TS folder that you can burn using Creator Classic. Burning a folder set to DVD will create a fully functional DVD. Do NOT rename the Video_TS folder other wise it will not play! Simply place it in a folder that is the name of your project if you need to keep track.

      Tip: Either of the above options are a great way to not only back up your projects, but make multiple copies to reduce encoding time!

Mar 03, 2008 | Televison & Video

1 Answer

My DVD drive could not write any things on DVD! it just write documents on CD.


this might be because you have not selected the option to burn a dvd or your burning software does not support dvd burning
there are plenty of free burning software programs on the internet

http://www.majorgeeks.com/BurnAware_Free_d5839.html

BurnAware Free is one of the most popular free CD, DVD, Blu-ray Disc burning software available for Windows.
Using this program you can easily create and burn Audio and MP3 CD, Data and DVD-Video disc, ISO and Cue Image,
erase or format rewritable disc, copy your CD or DVD to ISO image.

hope this helps

Apr 27, 2011 | Samsung TruDirect SpeedPlus DVD-RAM...

1 Answer

I cant burn my music onto CDs and my computer tells me i dont have a cd burning software when i should have one


you could use this burnaware its totally free if you dont like it just uninstall it also there are plenty of free burning sofware cnetdownload.com or majorgeeks

http://www.majorgeeks.com/BurnAware_Free_d5839.html
BurnAware Free is one of the most popular free CD, DVD, Blu-ray Disc burning software available for Windows.

Using this program you can easily create and burn Audio and MP3 CD, Data and DVD-Video disc, ISO and Cue Image,
erase or format rewritable disc, copy your CD or DVD to ISO image.


http://www.majorgeeks.com/CDBurnerXP_d4242.html
.


http://download.cnet.com/active-iso-burner/3000-2646_4-10602452.html

Active ISO Burner will allow you to burn an ISO image file to CD-R, CD-RW, DVD-R, DVD+R, DVD+R DL(Dual Layer), DVD-RW and DVD+RW (including double layer, DL). Active@ ISO Burner software accepts command line parameters to automate ISO images burning process.

http://download.cnet.com/instant-cd-dvd-burner/3000-2646_4-10393316.html

Burn audio, video, and data CDs/DVDs and create and burn ISO files. Instant CD & DVD Burner is the ideal choice for anyone looking for a simple but full featured CD/DVD burner. Build and burn ISO files on the fly and compile all kinds of audio, video, and data CDs and DVDs from any kind of file (MP3, WAV, AVI, MPEG, DIVX, XVID). Instant CD & DVD Burner supports all major drives including CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM (SCSI, IDE, EIDE, and USB 1.0 and 2.0).

http://download.cnet.com/burn4free-cd-and-dvd/3000-2646_4-10217894.html

Burn4Free CD and DVD is a burning solution that's compatible with more than 3,000 DVD, Blu-ray and CD burners. Burn data and audio from different file types (WAV, WMA, MP3, OGG, FLAC, WavPack, and CDA). Burn and save ISO files, open and save your project to disk, verify content, print compilations, copy DVD, copy BLU RAY and import your audio compilation from M3U and ASX playlists. The drives supported include dual-layer DVD, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM, BD-R, BD-RE (SCSI, IDE, EIDE, and USB 1.0 and 2.0).





http://download.cnet.com/burnaware-free/3000-2646_4-10878661.html?tag=mncol;8

BurnAware Free is a full-fledged disc burning tool - fast, lightweight, feature-packed and, most importantly, 100% free. The program burns all types of CD, DVD and Blu-Ray discs containing data, digital photos, music and video. With BurnAware Free, you will be able to create bootable or multi session CDs and DVDs, high-quality audio CDs from your collection of MP3, WAV, WMA, OGG, M4A, AAC and FLAC files, burn disc images, copy discs to backup ISO images and do a whole lot more.

http://download.cnet.com/Ashampoo-Burning-Studio-Free/3000-2646_4-10776287.html

Multi-disc file backup and restore on CDs, DVDs and Blu-ray discs; create compressed backup archives with powerful password protection; split archives automatically across multiple CDs, DVDs or Blu-ray discs; restore archive contents to their original locations; integrated Audio CD ripper store your audio tracks as WMA or WAV files; new option for setting the number of copies you want to burn (available for all disc formats); discs can now be verified immediately without being ejected first (if the drive supports this feature); numerous other small improvements that make the program easier to use and more effective; burn files and folders on data CDs/DVDs/Blu-ray discs; burn Audio CDs from WAV, MP3, FLAC, WMA and Ogg Vorbis files; burn MP3-CDs from your MP3 files; burn Video DVD, Video CD (VCD) or Super Video CD (S-VCD); create and burn CD/DVD/Blu-ray disc images; burn speed and other options can all be set automatically.

http://download.cnet.com/Macrium-Reflect-Free/3000-2242_4-10845728.html

Macrium Reflect Free Edition. An award winning disk imaging solution for free. A complete disaster recovery solution for your home and office. Protect your personal documents, photos, music and e-mails. Upgrade your hard disk or try new operating systems in the safe knowledge that everything is securely saved in an easily recovered backup file. Macrium Reflect supports backup to local, network and USB drives as well as burning to all DVD formats. This version is for non-commercial home use.

http://download.cnet.com/ImgBurn/3000-2646_4-10847481.html
ImgBurn is a lightweight CD/DVD/HD-DVD/Blu-ray burning application that has several modes, each for performing a different task: Read - read a disc to an image file; Build - creates an image file from files on your computer or network (you also can write the files directly to a disc); Write - write an image file to a disc; Verify - ensure that a disc is 100% readable (you can also have ImgBurn compare it against a given image file to ensure the actual data is correct); and Discovery - used in combination with DVDInfoPro, you can check the quality of the burns your drive is producing.


Apr 19, 2011 | HP Computers & Internet

1 Answer

HOW I DOWLOAD MY COMPUTER PICTURE TO A CD


  1. Check your computer to see that it has a CD or DVD drive that is capable of burning CDs. This drive may be built into your computer or an external drive. Either type should work equally well.
  2. Make sure you have a CD that can be burned. There are two types of CDs that you can use.
    1. A CD-R (Compact Disc-Recordable) is a Write Once Read Many (WORM) optical medium. This means that once the disk is burned it can not be erased. This type disk is usually used for permanent storage. For example; a music CD, a picture CD, or any other type of data that you want to keep permanently.
    2. A CD-RW (Compact Disc ReWritable) is a rewritable optical disc format. This type of disk can be burned, erase, and then burned again. This type disk is usually used for temporary data storage.
  3. Decide on the type of CD you plan to burn. There are many different types of CDs that can be burned and how you proceed depends on which type you are going to burn. The major types of CD that can be burned are:
    1. Music. This type of CD is the type of CD that is normaly burned for use in a home or automobile CD player.
    2. Data. This type of CD is most often used to store files that can be used by a computer. This type of CD can not be used in a standard home or automobile CD player. They are formatted using the "ISO9660" format, which cannot be read by a standard CD player.
    3. MP3. This is a data CD containing only mp3 compressed music files. Because it is actually an ISO9660 data CD, not all CD players will be able to play it. This type of CD can contain a much larger number of songs than a music CD but can only be played on a computer or CD player specifically designed to play MP3s.
    4. Disk image. A disk image file is a file that contains an exact copy of a disk. The most common type of Disk image is an .ISO image. Disk images are usually used for storing an exact copy of a CD on a computer. By using a computer, one can burn a CD from an .ISO image and create a usable CD.
    5. Ripping. Ripping a CD is the process of taking the audio off of one CD and either storing it on a computer or burning it to a second CD, thereby making a copy of the first CD.

  4. Decide on the software you want to burn your CD with. There are many different programs that are designed to burn CD's. Some are built into the computer's operating system, while others are individual programs. These programs range from very simple to very complex. Some of these are free, while others have to be purchased.

  5. Burn your CD. Burning your CD is as simple as running the software that you are going to burn your CD with, putting a CD into your CD burner, selecting the data to be burned, and then telling the program to burn the CD

Feb 02, 2011 | Computers & Internet

2 Answers

How to create bootable cd?


The following items are required:
  • A copy of the original Windows CD/DVD or ISO.

  • A copy of the Boot Files (Downloaded Below).

  • A minimum of 1GB available hard disk space for CD's.
    A minimum of 5GB available hard disk space for DVD's.

Create a folder called OS on your hard drive (C: is used in this example).

In this folder create two sub-folder called BOOT, and ROOT.


6dce51a.png
Copy the entire Windows 2000/XP/2003 CD (or extract the ISO) into folder ROOT.

1.) Download boot file. (bootfiles-from-tacktech-website.zip ~1.34KB)

2.) Extract the BootSector file (boot.ima) from bootfiles-from-tacktech-website.zip
into the folder C:\OS\BOOT

Start Nero Burning ROM.

Select File > New... from the menu.

f15c96d.png
1.) Select CD-ROM (Boot).
2.) Select Image file from Source of boot image data.
3.) Check Enable expert settings (for advanced users only!).
4.) Set Kind of emulation: to No Emulation.
5.) Set Load segment of sectors (hex!): to 0000.
6.) Set Number of loaded sectors: to 4.
7.) Set Platform identifier: to Intel x86 compatible.
8.) Press the Browse... button.


fdc3fea.png
Locate the BootSector file (boot.ima) in the folder C:\OS\BOOT.

Click the Open button.

9e7f187.png
Click on the ISO tab.

- Set File name length to Max. of 31 chars (ISO Level 2).
- Set Format to Mode 1.
- Set Character Set to ISO 9660 (standard ISO CD-ROM).
- Check the Joliet check box.
- Check all Relax ISO Restrictions.
- Check Allow more than 64 characters for Joliet names.

22923e9.png
Click on the Label tab.

Remove the check from Also use the ISO 9660 text for Joliet.

Enter the Volume Label into the ISO 9660 and Joliet text boxes.

Click the More fields button.

- View Windows 2000 CD Labels (TTID# 269)
- View Windows XP SP0 CD Labels (TTID#226)
- View Windows XP SP1 CD Labels (TTID#283)
- View Windows XP SP1a CD Labels (TTID#312)
- View Windows XP SP2 CD Labels (TTID#342)
- View Windows XP SP3 CD Labels (TTID#422)
- View Windows 2003 Server RTM CD Labels (TTID#292)
- View Windows 2003 Server SP1 CD Labels (TTID#355)
- View Windows 2003 Server R2 Disc Labels (TTID#387)

6519cde.png

Enter in the Volume Label into the System Identifier, Volume Set, Publisher,
Data preparer, Application
text boxes under ISO 9660 and Joliet.

Click the OK button.

5980e4a.png

Click the Burn tab.

- Check Write.
- Check Finalize CD (No further writing possible!).
- Set Write Method to Disc-at-once. (We have had Track-At-Once work as well.)
- Click the New button.

53647cb.png

- Locate the folder C:\OS\ROOT.
- Select everything in the folder and drag it to the ISO compilation panel.
Note: Some files are not show in the following image.
- Click the Write CD Dialog button.

ea7a68a.png

Click the Boot tab.

- Verify the settings. Correct if needed.
- Click the Burn button.


ae6d51d.png
Wait for Disc creation to finish.

21e7008.png
Click the OK button.

Click the Done button.

0df0e75.png

Process completed. You're done.

Regards
Pcs365.8

Jun 01, 2010 | Microsoft Windows XP Home Edition

3 Answers

I need to download an anti-virus site to a cd . How do i burn it to the cd


go to ths link which given below
http://www.avast.com/eng/download-avast-home.html

and now download antivirus from here
now to burn it to the cd follows these steps:

  • Read - Read a disc to an image file
  • Build - Create an image file from files on your computer or network - or you can write the files directly to a disc
  • Write - Write an image file to a disc
  • Nov 06, 2009 | GPS

    1 Answer

    Nero 7 write error


    i think you have tried to write a cpoyrighted disc .

    Jun 05, 2008 | Computers & Internet

    1 Answer

    Factory default disc on acer 4520G


    Hello,

    If you have Nero of Power ISO installed you can right click the .iso file and there should be a command in the shortcut menu that states "burn with Nero" or burn iso with Power ISO, etc. this should apply to other disc burning software you have installed.

    As you may know, .iso files are a compressed disc image file that contains the data layout for a complete CD or DVD. Most of the time, burning an iso image from first opening your disc burning software is more difficult but can be done by hunting through your software's menu commands.

    Hope this has fixed ya!
    Worldvet

    May 16, 2008 | Computers & Internet

    Not finding what you are looking for?
    Toshiba Satellite A105 Notebook Logo

    159 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Toshiba Computers & Internet Experts

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18391 Answers

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    k24674

    Level 3 Expert

    7993 Answers

    Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...