I m using SUSE 10.2 on it i m using Ncomputing L-230, the USB of this device is not working on client side, any one help me

The flash drive may need to be formatted. I hope this helps. Go to PC settings and look for your usb port which shows your flash drive and right click your mouse or touch pad and click format. Thank you and have an enjoyable day. Leave feedback.

It should work fine. As long as the SAP client is 'multi-user' aware then you're good to go. One 'acid test' is to see if the SAP client will work on a Terminal Server or a Citrix Presentation server and in this case it does. The NComputing solution, conceptually at the application layer, behaves much like TS or Citrix, thus looking for those solutions is what you'll need to know for NComputing. Here is the website I found about how to setup specific INI files for Citrix to get the SAP client working. My recommendation would be to test as is out of the box with two NComputing seats, simultaneously. If that fails, then try the suggestions on this website: http://community.citrix.com/display/adi/SAP+GUI+7.10+on+Citrix+Presentation+Server.

how to block websites in ncomputing client workstation i am using x550 series & 5 client terminal

Since you posted this four months ago, there has been some major updates from NComputing to improve the USB architecture. This should improve support for peripherals such as your printer. Download the latest software for either W2K3 (v4.9.5) or W2K8r2 (v6.1.3) and update your system. Lastly, it is critical, and I mean absolutely critical, that you update the firmware on the L300 as well. The firmware is included with the vSpace update so once the host is updated, go to the L300 and tell it to update the firmware. The current firmware version that works with v6.1.3 or v4.9.5 is v1.4.1. As of this writing, 8/16/11, those are the current versions.

The way the NComputing solution works, all the users are sharing the same host. So when you connect two printers, it's as if two printers are connected to that one host PC. When suing the USB port on the L300 you may have issues every time the device disconnects (like when a user logs off from their session) because the printer and it's respective port may have to be re-enumerated by the host. If possible, it might be better to do network printers. Also, when installing the printers, especially if you have the same make and model, make sure to LABEL them with unique names, i.e. Printer1, Printer2, etc. Otherwise, the host may have difficulty, more so the user, knowing which printer is 'theirs'.

ts error internal ncomputing

Ok. U must update all motherboard driver. U can use driver checker software full version. I tried this solution, and solved this problem. Cheers.....

www.vmware.com/support/ws3/ts/ws32ts_peripherals2.html kb.vmware.com/kb/774
kb.vmware.com/kb/1008576
Please use these links above, are all troubleshooting USB issues, VMWARE indeed has issues with USB, detection, anyway please read through and follow up on the links, and hopefully you will be able to sort it out.

yaes use this printer only usb not lpt port

How to connect scanner to the Ncomputting devices