Question about X-10 (MC460) Remote Control

1 Answer

X10 mini controler will not turn off pool light

Turned on the light as usual and went back to turn off and nothing. I have no idea what can be wrong. Any advise?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 128 Answers

The unit is probably transmitting but the receiver on the lights is not getting an acceptable signal.

try placing your controller on a line closer to your main electrical panel.

Unfortunately x-10 technology is very unreliable its convenient but its also a pain in the ****.

Do the basics make sure the controller is close to your panel, make sure its not plugged into the same circuit that your appliances, computer or electronics are plugged into as they generate RF interference.

Smarthome.com sells several X-10 boosters, if your home has a 2 phase power get one that plugs into a 220v outlet that will "bridge" THE TWO PHASES.

Posted on Jan 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mini max 150 pool and spa heater i have replace the pilot assembly and the theremal couple and the ignitor i have a great flame on the pilot but when i turn the valve to on the burners wont lite...


if pilot stays on and heater wont fire......problem with one of your safety switches, or problem with thermostat controls, or a bad connection someone within the entire circuit

Sep 30, 2013 | Pool & Spa

1 Answer

I have a Leisure bay with G2 controller, We shut the jets off for a few minutes and when we went to turn them back on neither of the pumps would start. I noticed a burning smell and turned off the two...


Sounds like wires fried or a circuit board failure. It would seem to me that once you open it up your going to be able to notice where the failure is.

May 07, 2017 | Pool & Spa

1 Answer

Exist free unlock xperia mini pro? if it does where can I get it?? Thanks for your attention


Free Unlock code no one provide,also not possible to get..it' latest Model Mobile so that You need to use the paid Unlock code,to get the code reach the Online sites,get the code at Superunlockcodes and Unlock it.....Find which country Network it locked now!!!
Sony Ericsson Xperia X10 mini pro Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Sony Ericsson Xperia X10 mini pro mobile phones. If you enter over a certain amount of wrong unlock codes on your Sony Ericsson Xperia X10 mini pro mobile phone, your phone may get hard locked and sometimes become unusable.
1. Switch ON your Sony Ericsson Xperia X10 mini pro with a Not Allowed SIM Card.
2. Your Sony Ericsson Xperia X10 mini pro will request to enter an unlock code.
3. Tap the box where you have to input the code and a number pad will appear.
4. Type in the unlock code we send to you.
5. Press the 'Unlock' button on the phone.
6. Your Sony Ericsson Xperia X10 mini pro phone should now be unlocked.

*NOT ACCEPTED : We mean, to use a sim card from a network other than the network your Sony Ericsson Xperia X10 mini pro is locked to.
Each Sony Ericsson Xperia X10 mini pro mobile phone has an unique unlock code. You can buy the unique unlock code for your Sony Ericsson Xperia X10 mini pro mobile phone using the form above.

May 29, 2011 | Health & Beauty

1 Answer

My sony ericsson xperia x10 started to freeze and tured itself off . tryed turning it back on it vibrated then did nothing . tryed charging it . at first the red light was coming up when i conected the...


Sounds to me like the device is faulty and there is nothing you can do about it. You will need to return it to the place you got it from. I deal with this sort of thing on a daily basis at work and that's what we usually do with phones with similar problems.

Mar 10, 2011 | Sony Ericsson XPERIA X1 Smartphone

2 Answers

My phone is sony ericsson xperia x10 mini pro, i have kept it for charging after few minutes red color light is blinking and it is not turning on, i have tried removing battery, sim and memory card, but...


My phone is sony ericsson xperia x10 mini pro, i have kept it for charging after few minutes red color light is blinking and it is not turning on, i have tried removing battery, sim and memory card, but still th problem is same. please help me

Oct 03, 2010 | Sony Ericsson XPERIA X10 Cell Phone

1 Answer

My acer flat screen monitor will not come on. My mac mini starts up, but the screen stays dark. Last week, it was staying dark after the computer went to sleep; I couldn't "wake it up." After a few...


I will assume that you have checked out the power cables and external cables. If this is the case you will usually notice an indicator light from your monitor. Universally it is yellow or orange when it has power, then turns green when it detects input from your computer. If the Led light doesn't turn green even when your laptop is already booted, your culprits would be your iMac's video controller or your monitor's input cables.

Jan 29, 2018 | Acer AL1715 17" LCD Monitor

1 Answer

My X10 Pro pool lighting controller worked for a while, then quit


Most likely the pool motor or other devices are making the powerline noisy. I suggest either getting an x 10 tester or unpluggin hosehold devices until you find teh source of the noise.

Stephen Lerouge
Home Automation Inc,
Southwest territory Manager

Jan 14, 2009 | X-10 X10 Smart Repeater Remote Controls

Not finding what you are looking for?
X-10 (MC460) Remote Control Logo

Related Topics:

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top X-10 Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74791 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5258 Answers

Are you a X-10 Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...