Question about Sanyo Microwave Ovens

Open Question

I have s1 come up on my screen model no. ems625s

I turn my microwave on flashes time once then goes off then displays S1

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rylee_smith
  • 8619 Answers

SOURCE: Microwave shuts off as soon

Hi


Thanks for using FixYa. This most commonly is a bad door switch, other possible problems are a faulty relay or solder joint on the power module, but a bad door switch is most common. Also make sure you hear the fan is still operating in your microwave. Next is to make sure the air intake grill on your microwave is not plugged up with air borne dust and dirt.


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Posted on Jan 16, 2010

Ad
vetteman3002
  • 2299 Answers

SOURCE: I have a RMW991 RCA

Unplug the microwave and wait about 5 minutes and plug it back in.

Posted on Oct 28, 2010

MicrowaveSvc
  • 9085 Answers

SOURCE: Kitchenaid microwave model KHMS155L, starts

"F2" means you have a shorting membrane keypad. The "Pan Heat" key is shorting.

On these models, the membrane keypad is not available as a separate part, so you would have to order the control panel frame assembly which comes with a new keypad.

In this case, you simply move your circuit board into the new frame. That is a simple do-it-yourself job.

You can find helpful exploded view diagrams and order parts by entering your full model number* from the tag on the oven here.

At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

Then you unplug the keypad (as per the photo below) and move the circuit board into your frame.

34374fd.jpg


Some connectors may have a lock:

positivelock.jpg
* The exact part number you need will depend on your exact model number. Models in that series are shown below:

KHMS155LBL0
KHMS155LBL1
KHMS155LBL2
KHMS155LBL3
KHMS155LBT0
KHMS155LBT1
KHMS155LBT2
KHMS155LBT3
KHMS155LSS0
KHMS155LSS1
KHMS155LSS2
KHMS155LSS3
KHMS155LSS4
KHMS155LWH0
KHMS155LWH1
KHMS155LWH2
KHMS155LWH3

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Dec 18, 2010

  • 1 Answer

SOURCE: My TAPPAN Microwave Oven Model

Unplug the unit, let it sit for a minute to clear power from the control board then plug it back in. If the display still shows S1, that could indicate a bad touch switch on the front panel, a bad connection between the touch panel and the control or a failure in the control. Unless you can get parts cheap and fix it your self, it's not worth paying for the repair.

Posted on Jul 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My smeg microwave wp1000asl30-5siii shows a s1 fault. is it worth repairing,


i collect used magnetrons from microwaves that others throw out so i repair my own for free. All you need is a magnetron. Maybe a capacitor too. It could have a stuck relay.

Nov 28, 2013 | Smeg Microwave Ovens

1 Answer

My SMH9151W Samsung Microwave displays a -SE- or a -5E- and will not operate. I unplugged over night and still will not operate


I had the same issue on a 2010 smh9151w samsung microwave after installing it and using it with no problem for 5 days. The second time we unplugged the microwave and turned the circuit breaker off and on we didn't reset the clock on the microwave so the display shows :0 and it has been working for 7 days straight now. Fingers crossed that this is a long term solution. Hope this helps. Thanks!

Mar 20, 2012 | Samsung Microwave Ovens

1 Answer

My TAPPAN Microwave Oven Model Type: TM5430 B only shows S1 in the display and it doesen't react if i push any othetr buttons. What can i do ???


Unplug the unit, let it sit for a minute to clear power from the control board then plug it back in. If the display still shows S1, that could indicate a bad touch switch on the front panel, a bad connection between the touch panel and the control or a failure in the control. Unless you can get parts cheap and fix it your self, it's not worth paying for the repair.

Jul 08, 2011 | Tappan Microwave Ovens

1 Answer

Sanyo EM-710F display dead


Low voltage Tx actually OK. Restored vaporised circuit tracks on controller board, fuse and interior light globe. All working OK.

Jun 18, 2008 | Microwave Ovens

7 Answers

Microwave oven (nn-sd997s) stuck in DEMO mode


Pressing "timer/clock" button 4 times turns on and off demo mode.

Apr 26, 2008 | Microwave Ovens

Not finding what you are looking for?
Microwave Ovens Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9085 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Oscar Netto
Oscar Netto

Level 2 Expert

110 Answers

Are you a Sanyo Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...