Question about Measuring Tools & Sensors

1 Answer

Jonsered chainsaw chainsaw wont start like there is no compression. Any suggestions?

Posted by on

  • P Patto Dec 11, 2013

    Hi larrys wife, I want to help you with your problem, but I need more information from you. Can you please explain the symptoms a little more. What do you mean by no compression ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

"Like there is no compression" simple first thing to check is the spark plug tight. Quick way to check compression hold the saw by the rope if it drops compression is weak. You could remove the muffler and check the piston, scoring is no good or the piston ring could be stuck from carbon build up. Carefully try and push the ring into the groove, with a small pocket type screw driver (flat blade). It should move and in and out. Another way is take a pencil with an eraser. Slide the eraser along the piston by the ring. You should feel the ring. What model Jonsered?

Posted on Dec 18, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am in Tanzania East Africa. Can you advice me how can I buy the Jonsered 2050 turbo piston kit?


get it here
www.lilredbarn.net > PARTS > Chainsaws > Jonsered > Jonsered 2050 Turbo
or here
www.ebay.com > ... > Jonsered Chainsaw Pistons&Cylinder Kits

Apr 06, 2017 | Garden

1 Answer

My jonstred chain saw has no choke lever


Ian Duncan...

I have no idea if you are bragging or complaining...

I WILL TELL YOU ... I have started many many a chain saw... and the chokes are nearly useless...

FIRST RULE: always use only fresh fuel...!!

Proper sequence for an ice cold saw (optimal adjustment)...
- squish the fuel bulb a couple of times
- set the choke
- couple of yanks until it coughs...
- completely release the choke and the next yank will get you running

If you have NO CHOKE... JUST leave the THROTTLE ALONE
until it coughs... Then start juicing the throttle...

What's a jonstred? Oh... Jonsered

62results for choke jonsered

Jonsered Chainsaw Parts Chainsaw Parts Discount Online Parts

Nov 12, 2016 | Garden

2 Answers

How do I change the sprocket on my Jonsered 621 chainsaw?


the sprocket is part of the centrifugal clutch assembly
go google and type in ---workshop manual for jonsered chain saws and there are pages of manuals
I opened one page named jonsered 2036 workshop manual --pdf download and it shows how to work on the chainsaw and includes other models in the procedures
that site is www.manualslib.com>brands>jonsered manuals> chainsaws>2036

Sep 26, 2015 | Garden

1 Answer

Dont wont to start to much fuel in cilinder


Never pull the starter more than 3-4 times under full choke. Pull 3-4 times on choke, push in to half choke and pull, should start.

Feb 14, 2014 | Husqvarna/jonsered 136-142,2036-2137...

1 Answer

I have a jonsered chain saw with broken Isolator spring the parts # 545006036. Where can I get one and a parts catalogue for this problem pierrehl@sympatico.ca 3


My suggestion is to find a good lawn and garden shop that repairs chainsaws. Take the saw there and they should have parts. If the shop is a Jonsered dealer your chances are better. I would start with the yellow pages under SAWS.

Sep 07, 2013 | Garden

1 Answer

Chainsaw oil do not lubricate


It's probably clogged up. Empty the oil out and blow it out with compressed air. Make sure you use oil designed for the purpose.

May 05, 2012 | Jonsered Tecomec Chainsaw Chain Sharpner...

1 Answer

Choke wont stay in the closed position for starting


Been a while since I saw a Jonsered but I think if you bend the choke linkage a little that it will stay in the choke position.

May 19, 2009 | Standard Oregon Chainsaw Chain For...

Not finding what you are looking for?
Measuring Tools & Sensors Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Measuring Tools & Sensors Experts

Vuk B

Level 3 Expert

678 Answers

Brad Brown

Level 3 Expert

15478 Answers

Tom Chichester

Level 3 Expert

33326 Answers

Are you a Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...