Question about Washing Machines
Remove the back panel quite a few screws, once of the belt can be seen, mind your fingers (use hook on metal coat hanger or the like) and roll the drum slowly with the hook under the belt directing it off the drum, refit is much the same as removal although special care should be taken not to nip the belt, fit to small pulley first on motor then turn drum slowly gradually rolling onto the drum mind the fingers and obviously make sure machine is off.
Posted on Nov 28, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove the rear panel screws, remove side panels, pull drum backwards, slide belt down front of drum and under, refit rear panel screws refitting drum at the same time, place belt around motor spindle and reasemble, job done.
Posted on Dec 25, 2007
If you can hear the motor running and have also checked the belt tension and they are O.K., then the only thing I can think of is the Motor pulley, where the belt sits on.
Check that out and make sure it is not loose on the motor shaft, so that the motor turns but the pulley slips.
Posted on Nov 09, 2009
Testimonial: "thanks, your reply was helpful and so quick, i have checked the pulley and they are ok to, somebody inwork suggested the starter could be gone. "
New belt is very tight, so you have to use more strength. Put it on motor and all other on "drum". Spin it easily and slowly but with strength until its done.
Be carefully, use gloves.
Posted on Apr 13, 2013
Tips for a great answer:
Jan 01, 2016 | Hotpoint Dryers
Apr 13, 2013 | Indesit Hotpoint Creda Tumble Dryer Belt...
Jan 09, 2013 | Hotpoint 1578h5 C00209186 Creda Crusader...
Nov 09, 2009 | Creda IWD12 Front Load Washer / Dryer
Sep 14, 2009 | Dryers
Jul 20, 2008 | Dryers
Nov 15, 2007 | Dryers
27 people viewed this question
Usually answered in minutes!