Question about Precor 935 Premium Series Treadmill

1 Answer

Can you advise please

You press quick start nothing happens but error 22 flashes up

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Precor Master
  • 12,223 Answers

Reset the machine make this: God bless you
Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

    • 3
Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
    • 4
Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.move on to the next step.
    • 2
Locate the reset switch on the underside of the treadmill console. Usually the button

Posted on Nov 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why won't my washer start a cycle? Start button LED just flashes. All other lights are steady. Door lock sounds like it engaged, but nothing happens.


There should be a way to enter the washing machine into service mode to view an error code. Check your user manual and then you should have your answer!

Jul 23, 2014 | Washing Machines

1 Answer

I am trying to start a cyle and everytime i push the cycle button it does not light up and the quick rinse button comes on and flashes nothing works at all if i push heavy wash it comes on and nothing...


You haven't told me how many times the light flashes, but I will take a guess that this is an error code associated with the water entering the machine being too cool. I believe the machine expects the water to enter at 110 degrees F (43 Degrees C).

To clear the error, press "Heated Dry" then release, then press "Normal Wash" then release and repeat this sequence until all the lights on the machine go solid green. Once this happens, hit ""Cancel" and the machine will reset.

The fix for the root of the problem is to increase the temperature of the incoming water in future (Turn up your water heater temperature a little)

Jul 05, 2011 | Kenmore Elite Stainless Steel 24" BuiltIn...

1 Answer

Wont turn on!!


this is a error code from the manufacturer.
count the flashes

Apr 26, 2010 | LG 42LC2D 42 in. LCD HDTV

3 Answers

Machine won't start and clicks if turned on with door open


 
Ok, this is the fix:


No payload. Close the door. Press off, then press on. Then enter a program starting by selecting the fabric and the others as usual. Do not press start, instead press the slip button to advance the programme to the very last phase, ie drain and empty. Then press start. It will perform this operation with no load and pump out the “no water”. This part takes 5 minutes. After the 5 mins the programme will end and the machine will beep annoyingly, but the computer will be reset and you can clear the program and use the machine as normal.


Why?


I had the same problem. The stupid computer inside remembers the program whilst it’s off and unplugged. What has happened is you accidently pressed start and start again to pause it in very quick succession. This confuses the computer and it thinks that a program is in progress. This is why it wants to close the door. There is no problem with the latch (unless it is a separate problem). You have to let it play out a program to reset it, which is why you can play the very last “drain” segment.


Question.


Presumably there’s a way to reset the computer either by a secret button combo or shorting out two pins from the computer box. I don’t know. If someone knows this please tell me.


Good Luck!


 

Jun 07, 2008 | Zanussi FJS1225W Front Load Washer

1 Answer

Unable to print message on Printer LCD


please press menu then start bk-copy (blue-button) then fourtimes arrow-up quickly one after another. machine will be in maintnenace press start bk copy again. What two digit error code does the machine display? Post again here.

(There are more than 20 diffrent errors for unable to print behind ;-))

Mar 14, 2008 | Brother MFC-5840CN All-In-One InkJet...

1 Answer

Sony Handycam DCR-IP7E Micro MV Digital Camcord


Take the battery out and turn selection switch to camera and then turn it off. Put the battery back in and its working again.
if that doesn't work try
Try smacking the side of the camera relatively hard with the palm of your hand. Eject the tape and reinsert. You may need to do this a couple of times.

Nov 03, 2007 | Sony Handycam DCR-TRV250E Digital...

1 Answer

Error C31:22


this is a capstan error but the capstan may not be bad. 1st I clean the tape path ,then check for low take up tension,needs to be 8 to 10 grams. start there, sometimes these require replacement of the mechanism which is not all that expensive considering. part is under a humdred. these mech are not just drop and go, they wll need computer recalibration. good luck.

Sep 16, 2007 | Sony Handycam DCR-TRV330 Digital Camcorder

2 Answers

Ariston Washing machine A1636 - Flashing lights


what 2 lights are flashing each light that flashes gives a differant fault code . Get back to me

Jun 20, 2007 | Ariston Technologies AW149NA Washer

Not finding what you are looking for?
Precor 935 Premium Series Treadmill Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Precor Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Howard
Howard

Level 2 Expert

115 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Precor Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...