Question about Computers & Internet

1 Answer

Uniwell sx 6600

Please help. We have accidentally done a factory re-set on a sx6600 we have just got from Ebay. We were trying to be clever and followed some instructions for how to change the name on the receipt and it turns out we were doing a reset. We only need the till for adding up and had that all sorted. We think if we can add a Clerk on we will be able to do the basic stuff we need but we can't see how to add a clerk on. Thanks in advance.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The only option I can see that appears to pertain to your problem is the clerk sign on function. I have to ask this, was a manual included with your purchase from ebay?

Posted on Nov 28, 2013

Testimonial: "Thanks for your reply. We've looked at a manual online but it doesn't say how to set up a Clerk. Think we might cut our losses and re-sell as spares and repairs and get a really easy one. If you know anything else though please e mail back. Thanks again."

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 225 Answers

SOURCE: Changing clerk name or deleting clerk name/code

Good morning! per review made on its operation manual, there's no topic or discussion about change or deletion of clerk name which would mean that you have to create a new one. In my opinion, this is made to identify accountability for the audit trail review, as well as to control possible fraud. best regards

Posted on May 11, 2009

  • 101 Answers



Posted on Jul 04, 2009

SOURCE: i have 3 table numbers on my till that i am unable

First I would run an OPEN CHECK REPORT in the X/Z mode. In the X/Z mode you go to number 4 "Z" press yes then go to OPEN CHECKs, press yes, go down to all and press yes again. This should clear the checks. If the clerk ID button is a DALLAS KEY you will have to have your dealer order it for you. All the Clerk programing is done in Program3. you get there by pressing the program mode button 3 times and go to Clerks and press yes. Then the first window you come to will have more have Clerk Features. Go there and press yes and then there is a list of cashiers/clerks. press yes on one of the names.Press yes for the descriptors and type them in, when done press yes

Posted on Sep 19, 2009

  • 1625 Answers

SOURCE: change the text on the sharp ae-570

I haven't got any information on this model. It may be an older one.
See if you can find it here:

Posted on Aug 25, 2012

  • 1625 Answers

SOURCE: Cannot access any other clerk except the first/default on Casio se-c300

It sounds like you are not logging off first. Press 0 CLK# to log off then log a new person on eg 3 CLK# for Jane.
If anyone needs a Casio SE-C300 manual, one of our users has it here:

Posted on Dec 17, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Go clever table android 4, screen will turn on but will only go as far as go clever logo will not load any further please help


Well, Its quite tricky to get round that but you will have to, Power the device down then press volume down and power until it comes on then it should bring you to a "recovery" sort of bit now you can do a factory reset just incase it is a software issue within the phone


Aug 06, 2013 | Tablets & eReaders

1 Answer

I'm trying to download E728 recovery disk but my serial/SNID no isn't recognised

If you have done a Factory Recovery, all your date is gone. You have formatted the HDD. You must start from the beginning, do all your Windows and eMachine updates. In Windows 7 you will find a folder, "Windows.old", after you have finished ALL the updates, do a Search for Windows.old, you will find SOME of your old data. If the Laptop didn't complete the Recovery process, try again. Where did you download the e728 Recovery disk from? Is it a boot disk? A ISO disk? You may have to contact eMachine support, using your Serial Number, order a Factory DVD to return the Laptop to Factory Settings.

Apr 20, 2013 | eMachines Computers & Internet

1 Answer

After cleverly spilling a drink into my Vaio PCG-V505ECP I took it apart to clean it. All was going well until I was putting it back together and accidentally pulled the small ribbon cable from the start...

HI This is Neo . find the head of the ribbon ,see that the copper plating is seen . if you see that you will find white head where you can put the ribbon cable . softly try to pull the white part and put the ribbon through the white head and push it and it is done . OR Copper plating is not seen on either side, you have to replace the ribbon . ask some technician to replace it he will do it .

Nov 02, 2010 | Sony VAIO PCG-V505EC Notebook

1 Answer

I have a nokia 6600 fold on 3 uk i need it to work on any sim network how do i do this ?

Hello :

To do that you need to unlock your phone or restore default factory settings .

Try this please :

Switch-off your phone.

1. Press and hold 3 keys; Green dial key, * Star key, no. 3 key on keypad and then press the power on/off to switch on the phone.

Remember, do not let go the 3 press and hold keys until you see a formatting word screen show!

2. After a few minutes when the Full phone formatting completed, your phone will back to original system and factory setting.

[by the way that will restore factory settings of your device ] . back up all of your important data before you do it ]

good luck .

rate please !

Mar 18, 2010 | Nokia 6600 fold Cellular Phone

2 Answers

Factory skins for various sx-70 models

Check Ebay for I have seen many sold there last year. Also google camera covering for I have purchased some years ago somewhere in the US on the east coast I do beleive. I think the name was

Dec 28, 2009 | Photography

1 Answer

My Uniwell 6600 series cash register showed error code 18, replaced paper, both sides, then went to error code 3, redid cashier code. We tried to reboot by using the inital reset, now we get beeps and no...

I have to know whether the machine was unpluged for a long period. If it's then you have to do a complete reset and start from scratch like it come out from the Uniwell. If you like you can give me a call @ 780-429-1262

Dec 16, 2009 | Uniwill Computers & Internet

2 Answers

I tryed to format my 6600 nothing has happened still the gallery is not opening & bluetooth says system error my imei 355683007928231 help me Ilove my 6600. yours ccparts


Have you formatted the phone in this way

1)Switch off the phone
2)Hold 3,* and Green button simultaneously
3)Now press the power button holding the 3 button, After 5 seconds leave the 3 buttons
4)You phnoe should say, formatting and all your data would be reset to factory orginal

CAUTION: You will loose all the data and contacts stored in phone memory, But this is the only way
Please rate this solution

Oct 14, 2009 | Nokia 6600

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers


Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides