Question about Naxa Electronics NX-550 13 in. LCD TV
Need universal remote code for 24" Naxa LED Tv/dvd combo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter.
NOTE: some tvs WILL NOT program to our remotes
Posted on Jul 30, 2010
install uverse, the auto seek is done by hit and hold TV and OK. wait for lights to flash enter 900 and push play over and over SLOWLY and when the tv turns off, press enter
Posted on Dec 25, 2010
Tries unplug,replug tv back about an hour later.The tv should be resetting itself back to factory setting,sound should work now.Still have the same problems.The tv Tuner signal board is shorted and the causes.That the board,where the incomming broadcasting signal cable plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish tv Tuner signal board for the replacement.
Posted on Dec 28, 2010
SOURCE: my naxa 19" flat screan
Hi, This could be an internal fuse in the tv itself, worth a check if you are confident yourself, make sure you replace it with the exact same type and rating, if it blows then there will be a pretty bad fault somewhere on one of the panels, most likely the power supply.
Please! if you are going to attempt anything yourself be careful, always unplug the TV first before attempting anything and be aware that power can still be held within the TV even when off.
If you are at all unsure please consult your local TV technician.
Posted on Feb 10, 2011
Hopefully you have resolved this issue, but if you have any additional problems or questions, here is some help. Follow the directions below, and that remote will be programmed right away.
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.
DISH Network Customer Service
Posted on Feb 11, 2011
Tips for a great answer:
Feb 08, 2016 | GE Televison & Video
Jan 08, 2016 | Televison & Video
Jan 29, 2014 | Naxa NTD-1351 13.3" Widescreen HD LED...
May 25, 2011 | Naxa Electronics Nx-540 13 in. Portable TV
Mar 05, 2008 | Televison & Video
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: