Question about Dell InspironTM 600m Notebook

1 Answer

Can't see usb drives. Thinking its a virus

Can't see usb drives. Thinking its a virus problem. When I go to Device Manager I get a message:

Windows – No Disk

Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6b7c 75b6bf7c

Cancel Try Again Continue

Tried uninstalling USB host controllers and scanning hardware. It finds the drives, downloads driver but still can't see drives.

Posted by on

  • karen_urb May 09, 2009

    Tried that by looking through past forums. My removable devices do not appear - only the DVD and CD drives.

  • karen_urb May 09, 2009

    AVG comes up with this periodically:



    Accessed file is infected



    Threat detected!



    File name: 122.224.5 189/~aak.jhuwe87/files/lmn_setup.exe



    Threat name: Trojan horse SHeur2.AEKE





    Process name: C/WINDOWS/system32/svchost.exe

    Process ID: 884

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 125 Answers

You computer problem is due to malware. to fix the problem temporarily. Right click on my computer then click on manage. choose Disk Management, on the bottom, you will see removable devices that doesnt have a drive letter. Right click its name then pick "Change Drive Letters and Paths". Change it back to the letter it was before this happen.

Check for malware, adware with spybot search and destroy and virus with your antivvirus afterward to make sure this doesn't happen again

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix My Passport Hard Disk 1 TB which is not working and showing error 0x8007041D I have my essential data in this device.How can I retrive the data from this device.


Hi there,
The mentioned error may be related to your anti virus software. Check the device on another PC to confirm where the issue comes from. If you have this option, disable or uninstall your current anti virus software and reinstall My Passport's drivers from Device Manager. Anyways, this error is OS related and your HDD should be fine.

http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/windows-update-error-0x8007041d/8ae18656-7030-47c4-b2a8-37c2bb876bac - Similar topic in the Microsoft Community

Hope this helps

Oct 31, 2014 | Western Digital My Passport Essential SE...

1 Answer

Not recognice by usb hard


A USB hard drive is a portable external storage device that works just like a conventional hard drive.

The device is simply plugged into a USB port on your computer as you would connect a flash drive.


Unlike a flash drive, however, a USB hard drive can store a much larger amount of data.


If your computer will not recognize your USB hard drive, you can try troubleshooting steps to resolve the problem.

Plug one end of the USB cable into the port on your hard drive and plug the other end into the USB port of your computer. Ensure that both ends of the cable are connected securely.


Open "My Computer" (Windows XP) or "Computer" (Windows Vista/7).

The USB device should be listed as "removable disk" once it is plugged into the computer.


If it is not listed among the available drives on your computer, proceed to the next step.

Ensure that the data cable is working properly.


Try another USB cable if you have one available.

Disconnect all other USB devices from the computer as they may interfere with the operating system detecting the external hard drive.

Reboot the computer if the USB hard drive is still not recognized.


Plug the USB cable into another USB port and check to see if the device is detected.

If you are using a USB hub, remove the device and plug the external hard drive directly into a USB port.


If the computer still fails to recognize the device, the external hard drive itself may be experiencing a hardware problem.


Check the status of the hard drive in the "Device Manager" window. Under Windows XP, right click "My Computer" and select "Device Manager."


For Windows Vista and Windows 7, click the "Windows" button in the lower left corner of the screen, then type "Computer Management" in the search bar and press "Enter."


Select "Device Manager" in the "Computer Management" window. In the Device Manager window, click the "+" sign that appears beside "Disk Drives."


If the external drive is not listed, click "Other Devices" in the Device Manager window and see if an "Unknown Device" appears.


The external hard drive may have been detected but the device is not working properly.

If it is still under warranty, take the device to the computer store where it was purchased to have it repaired or replaced.


Hope this helps


Nov 07, 2012 | Computers & Internet

1 Answer

My phone is not able to connect through pz via usb


USB NOT RECOGNIZING PHONE

Cell phones use the popular USB connection which sometimes produces errors while connecting. These messages are similar to the "Device Not Recognized" error received with various USB devices. Fixing a cell phone is sometimes specific to the brand, but they are so similar that most can be fixed the same troubleshooting steps.

instructions

Device Manager

Click "Start" and go to "Control Panel." Double-click "System" and locate the Hardware tab to find the Device Manager. Vista and Windows 7 users can just type "Device Manager' from the start menu.

Locate "Disk Drives" from the list and double-click "Portable Device." If there is an exclamation mark or other error on the device, go to the "Drivers" tab.

Click "Uninstall" and remove the player. Restart the computer and attach the player reinstall the drivers.

Anti-virus conflicts

Plug the player into a different computer to see if it gets recognized. If it does not, contact the manufacturer to find out if it is broken.

Turn off your anti-virus program on your PC if the device works on other computers. Reinstall the drivers using the device manager as described in section 1.

Plug in the player to confirm the connection.

Other solutions

Check the battery level and make sure the batter is not low or depleted. A low battery will sometimes prevent the player from connecting. Let it charge from the power cord, if necessary.

Verify that you have at least Service Pack 1 installed. Go to the Start menu and type "Run." Press Enter.

Type "Winver" in the box and press "Enter." The Windows version will be displayed along with any installed service packs. Download a service pack from Microsoft, if applicable.

Remove the player from the USB port and push a pin into the reset hole located on the bottom. Reconnect to see if the problem is resolved.

Check the connection to make sure it's secure. The cable should fit firmly into both the player and the computer. Connect to a different USB port if you have one available.


Tips & Warnings

A bad cable will sometimes prevent a good connection. Use a different one to isolate the cause.

Jul 18, 2011 | Nokia 6300 Cellular Phone

2 Answers

My laptop with windows 7 all of a sudden cannot detect any usb? indication at device manager, usb host controller, there's an unknown device??can u help me what to do?


hi.
the Driver of USB Controller is deleted (by a virus or something like that)
and you need to install some drivers.
so put the motherboard driver Disk in your drive and try to update the unknown device in your Device manager
or install complete drivers of the Disk.

Jan 29, 2011 | Microsoft Computers & Internet

1 Answer

All External storage devices "USB Device Not Recognized"


Dear Sir,madam
You have to do some steps about fixing this problem :
1: Go to Device manager by right click on my computer then manage and then device manager.
2: Go to universal serial bus controller and export it.
3: in each USB root hub right click and then properties.
4: In properties screen select power management tab and unmark on " allow the computer to turn off this device to save power ".
5: After finishing this steps in each USB root hun restart your computer and then done

Jul 24, 2010 | Microsoft Windows XP Home Edition

1 Answer

Computer error problem


http://www.fixya.com/PostAnswer.aspx?thid=2692939
drea_mike67 on Jul 31, 2009
a message saying windows-no dis exception processing message c0000013 parameters 75b6bf9c 4 75b6bf9c 75b6bf9c then it says cancel try agin contunue and i push one and it just keeps coming back constantly.

Friday, July 31, 2009
Hello drea_mike67,

There may be any number of storage device faults causing the no disk exception error message. For instance, a usb device may have been removed without choosing the 'safely remove hardware' option. If that's the case then reconnect the usb device and choose 'safely remove hardware' (bottom right hand corner of your PC screen), and then remove the USB device.

If the error message still comes up then try using the device manager in the windows control panel like this:

•Opening the Control Panel
The Windows Control Panel can be opened by:
Selecting *Start > Control Panel (on Windows Vista)
- OR -
Start > Run > Type 'Control' and select OK (on Windows XP)

In the Control Panel, do the following:
•Select System
•Select the Hardware tab
•Select Device Manager
•Look for disk drives or other drives that are not used or recognized...
•Right click the device(s) and select uninstall

If this solution is helpful please click 'YES' by 'Was this helpful?' below.

Have a great day,
martyshaw152

Jul 31, 2009 | HP Computers & Internet

1 Answer

My noteoook got the problem with port usb


Since you have these many problems with your laptop, Firstly try to reformat the system and reinstall all the neccessary drivers. Many times reformatting works well as your OS might malfunction when you have virus or malwares in your laptop.

OTHER SOLUTIONS
a. for USB:
  1. Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
  2. Expand Universal Serial Bus controllers.
  3. Right-click a USB Root Hub in the list, and then click Properties. The USB Root Hub Properties dialog box is displayed.
  4. Click the Power Management tab.
  5. Click to clear the Allow the computer to turn off this device to save power check box, and then click OK.
  6. Repeat steps 3 through 6 for each USB Root Hub in the list.
  7. On the Action menu, click Scan for hardware changes.

    Windows XP recognizes the new device.
  8. Close the Device Manager window.
b. SD CARD
Your 1GB kingston card might have virus. use a card reader and reformat the card for future use.

c. Uninstall and reinstall the driver of your finger scanner.


Hope this helps,


~regards,
Jegan


Jun 01, 2009 | Lenovo 3000 N100 Notebook

1 Answer

Kingston 2gb drive s not detcted by the system


yaar meri pan drive open nahi ho rahi hai na hi format ho rahi hai

Feb 13, 2009 | Kingston (DTIU3/2GB) 2 GB USB Hard Drive

1 Answer

Windows xp will not recognise the seagate freeagent desktop drive


Assuming you have tried other usb ports and had no change,remove the usb connection, then go back into device manager and select the usb controller, right click and select delete as this will erase any input driver the usb port recognises. Restart the pc and then the controller should be reinstalled automatically as it sounds as though the controller has become corrupt for some reason. Go back into device manager and check there are no exclamation marks, reconnect the drive and see if it's recognised.

Oct 05, 2007 | Seagate FreeAgent Pro - 500GB, 7200 RPM,...

3 Answers

ERROR: code 28 -- Windows XP & USB 2.0


I'm unable to connect my western digital hard drive to my Windows XP computer via the USB port. When I check the USB 2.0 Controller in the Device Manager, there is a yellow exclamation mark (!) next to it. When I check on the status of the USB 2.0 Controller, the following message appears:

The drivers for this device are not installed (code 28).

What do I do now?

Sep 21, 2005 | Polaroid PhotoMax Fun Flash 640 SE Digital...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...