Question about General Electric WSSH300G Front Load Washer

1 Answer

GE WSSH300 stops after wash and need to hit start again to finish

I have a GE WSSH300 and I have had many issues with it. I have already cleared the filter and looked for any clogs in the hoses. It begins fine, washes fine, and then when it comes time to drain and rinse it beeps and lights up. I have to push start for it to finish the load which it does just fine. It can spin, drain, and wash but it stops every time after the wash function and before it can drain and rinse. I'm going out of my mind with this, I have to go down stairs two times per load and it is making me crazy.
Is there a way to re-set the computer? It seems to think there is a problem with drainage. I have unplugged and tried to look for an error code. I pushed start and cancel and it doesn't blink and then I read to reset you push options and cancel.
Any suggestions or help would be great!

Posted by on

  • luddite23 May 11, 2010

    Where is the link to the cleaning of the filter!? That might help.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Be sure to rule out one of the simplest things first---be sure the button that gets depressed when you close the lid is still functioning (or even THERE) Sometimes, if you have had a severly offset load, this switch can become damaged. Some washers will not continue to advance if it " thinks" the door is opened.

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Washer will start and then stop 5 seconds later. It will start again 2min later and stop 5 sec after that?


I have a front loading frigidaire washer which works fine. It starts and stops throughout the whole wash but gets the wash done. That is how it works.
Does your machine simply stop and not finish the wash? Or are you concerned about the length of time it takes to get the wash done?

Aug 12, 2011 | Frigidaire Washing Machines

1 Answer

How do i clear print queue , document says deleting but wont finish


go to start-in the run or search box-put in services.msc-hit enter-look for print spooler-left click on it-hit stop-then hit start or restart.
restart pc or go back to printers and faxes cancel print jobs stuck in the queue again.close printers and faxes and open it to check if queue already cleared up.that should do it.

May 27, 2011 | Office Equipment & Supplies

1 Answer

During every wash cycle the machine stops and the indicator light says dL we then hit pause cancel and have to start the machine on drain spin to finish the cycle


This is your door lock mechanism that is either going out ot has gone out already. How old is your washer? We are a Whirlpool factory authorized parts and service company and if you will contact us at:

http://www.fixya.com/repair/d499389-accurate_appliance_repair_service

We will get the correct part out to you asap.

We hope to be able to get you washing again soon. :<)

Nov 08, 2009 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Ge wssh300 will not start may, just beeps


hold the start and select button in for about 30 seconds together until you hear a beep; this resets the control panel

Aug 04, 2009 | General Electric WSSH300G Front Load...

2 Answers

Washer stops w/ 19 min. left to finish and door pops open.


the same thing happened to our washer and a friend told us to take off panel below door and there's a opening that's covered with a circular plastic cover, open manually and remove all the junk that's accumulated from all washes, careful it may leak a great deal of water! Try that if anything else, unless you've already had it serviced!

I'm looking to try and solve yet another issue with the same washer...

Mar 31, 2009 | GE Energy Star WCVH6260F Front Load Washer

1 Answer

My GE Washer Door Won't Lock


Try this, press the pause/cancel button twice. Open the door, ensure there is nothing blocking the door and close the door fully. Open the detergent drawer fully and re-close the drawer. Select Quick wash and press start.

If this does not correct the problem, call for service under warranty.

clarkco

Feb 19, 2009 | GE WBVH6240F Front Load Washer

1 Answer

I have a new washer. Less than 2 months old. I always use the regular cycle but today I needed to wash a very small rug. I used the quick wash and iti took forever. Then at the end( after the cyle) the rug...


I just need help. I do not want to pay anything to have this question answered. I paid $1,200 for these two new appliances less than 45 days ago! I thought this site was connected with GE. Apparently not.

May 26, 2008 | GE Washing Machines

Not finding what you are looking for?
General Electric WSSH300G Front Load Washer Logo

454 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Electric Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

Are you a General Electric Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...