Question about Dryers

2 Answers

Whirlpool dryer not drying all the way

Commercial quality super capacity whirlpool eletric dryer has to go through two cycles of drying on high heat to dry normal size load

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dryers Master
  • 1,070 Answers

As a general rule, your symtoms indicate that there is a lack of heat. Causes?= Obstructed vent. This causes overheating of the elements and they go out on a safety to prevent them from burning up.
One or more elements not working. Burnt out, bad safety (not working like it was designed to do), control to elements has malfunctioned.
Overload of clothes is possible but not probable.
On a long shot, check the plug, recept., and breaker. You may have lost a "Leg" of power to the unit and this is causing a "Low Voltage" condition.
Hope this is of some help.

Posted on May 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

You need to clean the vent in house wall.Make sure vent hose in not kinked.

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Barrel isn't turning.


I believe you will find the belt is broken.
There is a motor which is supposed to turn a belt, which in turn drives the drum.
If you wish to repair ir yourself, a letter to "Fixya" could cause someone to walk you through the steps.
Be blessed.

Mar 04, 2013 | Frigidaire FGR641FS Gas Dryer, White, 5.7...

1 Answer

Drier not hot enough when i set temperature to high position


Replace the high limit thermostat located on the top of the heating element housing. Here is the part to order.

Nov 18, 2012 | Frigidaire GLER104FSS Gallery Series 27...

1 Answer

My dryer is not blowing hot air? I have a whirlpool, commercial quality, super capacity plus, 8 cycles & 4 temperatures. help.


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

Jun 10, 2010 | Dryers

1 Answer

Heating element going bad. Even with setting on high and small loads the clothes take forever to dry. Can I replace the heating element myself?


yes but make sure to unplug before you start but make sure lint is not the cause ck dryer hose cabinet motor blower wheel and discharge tube is lint free the element doesnt sound like the problem they just go inop may be it is limit switch short cycling but also make sure element housing is clear of lint

Jan 26, 2010 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

1 Answer

Brand new samsung dryer not drying fast enough took 2hours to dry and still damp. the dryer was on more dry, high heat,


try checking your vent exhaust
and vent tube
soometimes airflow is slowed by clogs and build up causing long dry times

Oct 14, 2009 | Samsung 7.3 Cu. Ft. 9-Cycle Super Capacity...

1 Answer

Turns on but doesn't heat up


most likely heating element needs to be replaced.most can be accessed by removing back panel. also a thermostat switch may be faulty.

Aug 09, 2009 | Dryers

1 Answer

I have a whirlpool super capacity dryer that is very slow drying the clothes. It takes three or four cycles to dry a load of clothes. I've cleaned the lint screen.the exhaust tube and the clothes aren't...


hi .your air duct in the dryer is probably clogged . To repair. remove lint filter 2 screws on the top, remove . lay dryer on floor, front down. remove back panel . remove the air duct, clean all lint thanks the appliance doc

Oct 02, 2008 | Whirlpool Dryers

Not finding what you are looking for?
Dryers Logo

Related Topics:

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...