Question about Tools & Hardware - Others
Motor burned out. Help
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: No operation
Hello their, thanks for trying fixya, the issue with these type of tools is normally the ac motor, their are many diffident types used but yours in particular 120V, 50-60 Hz, AC, 1.15 amp double insulated motor. Operates from 5,000 to 30,000 RP, their is a electric motor that may have failed on you or the switch could burned out. this is possible when the contacts are shorted for to long become to hot and overload the small circuit used to control potential voltages to the motor, consider it like a variable pot switch.
a simple test here would be you can take the unit apart easily enough and unplug from wall, make sure you have no voltage from mains going in. when the unit is not plugged in get your trusty voltage ohm meter or vom
Posted on Nov 27, 2009
Here's the email from I got from Dremel (in my case the flex coupling broke):
Inside the tool is a flex coupling and spline driver.
The flex coupling is # 2615294309 and the price is $ 1.25.
This is the hollow plastic sleeve about 1" long with grooves on the
inside, that goes between the motor shaft and the output shaft.
The spline driver is # 2615294308 at $ 1.00.
Spline driver sits on the direct end of the motor shaft. The flex
coupling sits over the spline driver. Spline driver is about 1/4",
hard plastic with grooves on the outside.
Total shipping for orders under $ 5.00 is $ 2.50. Orders over $
5.00 is $ 4.00.
I have provided ordering instructions below.
To order by phone: 1-800-437-3635, Monday-Friday from 7 am to 6 pm
central time. VISA, MasterCard or Discover is accepted.
To order by mail:
4915 21st Street
Racine WI 53406
Posted on Apr 17, 2010
The part that goes between the motor and the chuck is called the CLUTCH UNIT,
REF 2615294309 it is a splined rubberised sleeve, it also fits the 276 and 396.
The price is £3.69 (including vat at17.5%) and can be obtained from Jaymac (Derby) Ltd.
Posted on Sep 26, 2010
Tips for a great answer:
Sep 07, 2015 | Dremel Tools & Hardware - Others
Nov 28, 2013 | Hand Tools
Sep 07, 2011 | Dremel Variable - Speed Multipro Rotary...
Nov 07, 2010 | Dremel Garden
Jul 19, 2010 | Dremel 395 Variable Speed Multipro Rotary...
Nov 27, 2009 | Dremel Tools & Hardware - Others
Jun 21, 2009 | Dremel Moto Tool Kit
Feb 15, 2009 | Dremel Variable - Speed Multipro Rotary...
Aug 16, 2008 | Dremel Variable - Speed Multipro Rotary...
106 people viewed this question
Usually answered in minutes!