Question about Frigidaire FRS3R5EMB Side by Side Refrigerator
Refrig/frz both stopped all forms of cooling. no ice being made. cleaned condenser coils & fan. fan is blowing, cant tell if condenser is or not. Power is working fine. That's all I know how to do
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
might be your compressor relay gone bad. if the condenser fan was running and no compressor that could be the case. Also could be a bad compressor. you could try installing a 3in1 start kit. cost about $30. if doesn't start with that then compressor is kaput.
Posted on Jun 27, 2010
Hi, it's possible you have a defrost problem, to know if you have a defrost problem, you should unplug/disconnect refrigerator, remove your produce, leave doors open, for faster defrost, clean and leave unplug/disconnected for about hour, be cautious you will get excessive water from defrosting. let freezer defrost completely, then plug/connect refrigerator, let it work/run for an hour, if it's o/k, put back your produce, if it work good/ o/k for 3 to 4 days and start doing the same thing, you got a defrost problem, defrost problems are caused when excessive ice build up on your evaporator, two things could cause a defrost problem. (1) excessive moisture/ hot air entering refrigerator, hot days,hot foods, regular opening, to close heat source, range/ oven. in cases like that, cleaning of refrigerator will normally solve that problem. (2) faulty defrost heaters, defrost thermostat , located in back of freezer side, you will have to remove shelves and back panel, to get access to it,also check your defrost timer and speed of fan, but first disconnect refrigerator, clean and try , before changing any parts. it could just be excessive moisture. always remember to disconnect your refrigerator before attempting any repairs, let me know what happened, then i could tell you exactly what's problem. good luck
Posted on Aug 19, 2009
That sounds like the start relay is buzzing. Unplug and lets check the compressor to see how hot and if too hot to hold your hand on the top of compressor we need to leave it unplugged until we find out if the start relay, start capacitor, overload or if the condenser fan stops after running a short while. Sea Breeze
Posted on Sep 13, 2009
Check out these tips...they can help you figure out whats going wrong...
Refrigerator not Cooling or Fridge not Cooling
How to Defrost Refrigerator Defrost Timer Problem
Water Running in Refrigerator from Freezer
Posted on Aug 12, 2010
Tips for a great answer:
Nov 27, 2013 | Frigidaire FRS3R5EMB Side by Side...
Sep 07, 2011 | Microwave Ovens
Many times a freezer and/or refrigerator do not work right because of a dirty condenser coil...there are also many other things that can go wrong.
you are hearing a clicking or buzzing then check out the last two
If your refrigerator is running but warm, then...
Check out these tips that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...
Refrigerator Condenser Coil Cleaning Refrigerator Repair
Refrigerator Troubleshooting Refrigerator Compressor
Refrigerator Compressor Start Capacitor and Start Relay
Feb 01, 2011 | Refrigerators
Nov 22, 2010 | Maytag Refrigerators
Jul 19, 2010 | Whirlpool 25.6 cu. ft. Side-by-Side...
Nov 18, 2009 | U-Line Refrigerator Ice Maker
Aug 24, 2009 | Whirlpool GS6NBEXRQ Side by Side...
Apr 17, 2009 | LG LFX25960ST Stainless Steel French Door...
Jan 19, 2009 | GE GSH22JFR Side by Side Refrigerator
Sep 05, 2007 | Frigidaire FRT17G4B Top Freezer...
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: