Question about Televison & Video

1 Answer

Is it posible to program my Centurion D3 remotes to open an E.T MK111 garage door motor

I need to decide on a motor to purchase for my newly installed gate. I would like to know if its possible to use a Centurion D3 remotes to open my E.T MK111 garage door motor onto the same device

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Televison & ... Master
  • 73,635 Answers

No. It's not possible. There is no setup codes to synchronize with.

Posted on Nov 28, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ercupa190
  • 12223 Answers

SOURCE: Programming the Nova remote for Gemin garage door

download the instr manual go www.manualsonline.com
download the coede www.remotecodelist.com
God bless you

Posted on Apr 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Master Mechanic garage door opener will not program


battery ok in the remote you are trying to programe
so its a two door set up separate motors and controllers

if setup is using a shared motor and main controller i my self have not been able to program two remotes

how its programmed
depends on what remote the fitter decided to use at the time

. Master Mechanic Garage Door Opener
...

Jun 08, 2016 | Building Materials

1 Answer

I got my centurion gate motor D3. the problem is when i press the remote an LED lights but the gate does not open, i opened the motor cover and there is no light nor sound from the motor. the gate can be...


Try to reprogram your remotes.... or replace the batteries even if the l.e.d. still works (it only takes half a volt to make the l.e.d. work but almost the full charge of the batteries are needed to send a working signal.

Oct 18, 2013 | Televison & Video

1 Answer

I need to know how to programe extra remote for my centurion D5 moto gate


If you Google Centurion D5 moto gate you will find a video listed that shows how to do what you need.

Jul 26, 2011 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I need to programme extra remotes to open and close my centurion gate motor


You can call the Technical Support Hotline at 0860-236-887 or you can e-mail at support@centsys.co.za.

Nov 01, 2010 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I really need your help. My Craftsman unit model number is 139.53615SR manufactured 1/92. I have a three car garage. The original two remote controls were lost and since then I've used the setting in my...


Have your neighbor bring over his remote and open or close your door with it. Then hold the smart/learn button in for 6 seconds on your opener. Then see if he can open your door. He shouldn't be able to because that procedure erases the memory in your opener. No remotes should work. You need to get that remote #53778 back and program it and then see if your neighbor can open your door. If he can open your door at any point after you have held that button in for 6 seconds you need to get a new door opener.

Oct 25, 2010 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

How to program my cars garage door opener buttons for my garage door.


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

May 15, 2010 | 2001 Nissan Altima

1 Answer

My Homelink wireless remote is stuck on fast flashing red light. I can't seem to clear my remote to program any of the buttons to my garage door opener. This is the second one I purchased, I had no...


Try this.

HOMELINK PROGRAMMING




  1. Clear out anything previously programmed into the in-car system from the factory by holding down on the 2-outside buttons simultaneously, until the in-car LED starts flashing rapidly. This may take up to a minute (in most cases, the key should be on auxilary, and/or the car door must be shut).
  2. Decide which button you want to make to be your in-car garage door transmitter. Hold your transmitter up near the selected button, pressing both the garage door remote and the selected in-car transmitter button simultaneously. Hold down on the buttons until the in-car, LED light flashes rapidly. This sets the in-car remote transmitter to be your garage door openers make transmitter, but you are not done. You now need to make this in-car transmitter your personal transmitter.
3. Go to the Learn Button on your garage door opener. The button is usually next to the area where the floppy antenna is connected to the motor head. With Genie it is most often behind the light lens, and an indicator light flashes red when pressed. With Sears or Liftmaster (Chamberlain) it is near, or part of, the terminal screw board, and is a red, green or purple square button with a green, amber or purple indicator light. Press this learn button momentarily. The indicator light will turn on and blink if Genie or otherwise stay lit. For Genie systems, go back to the in-car transmitter button you programmed and press this button 3 or 4 times, or until the door starts moving. This should set your in-car transmitter to your garage door opener. For Liftmaster, Sears, or Linear Megacode press and hold the in-car button you programmed until the garage opener light flashes. Your in-car is now programmed to operate your door.



Nov 20, 2009 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Craftsman new 315MHz Garage door remote programming with old openers


The radio frequency has been changed so the two are not compatible.

Jun 01, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Cindy Wells

Level 3 Expert

5056 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...