Question about Sanyo 42 in. LCD TV
The whole system might have been reset to its factory settings, after you hit the reset button. Do a re-tune, and do all other adjustments similar to previous screen, before you hit the reset button. There is no other fault. Refer its user manual for details.
Posted on Nov 27, 2013
Testimonial: "When I hit the reset button, I still get nothing. I can't do a re-tune if I have no picture ?"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You should try and download the users manual if you do not have one...I remeber seeing in it that after hooking every thing up, you have to do the channel search twice before the unit will work properly..This is highlited in the manual with correct hookup diagrahm..
Posted on Aug 10, 2007
I had the same problem and my tv was out of warranty. I took it to a local repair shop and they told me didn't work on that brand. They said they charge $300 minimum for labor, plus parts. So probably at least $500 to fix. Since I figured we had nothing to lose my buddy and I took it to our shop at work and decided to take it apart and look for any obvious problems such as blown fuses, burned components, etc. All of the printed circuit boards are connected to what appears to be similar to a motherboard via data ribbons. We disconnected the data ribbon of each PCB to the microprocessor PCB and turned on the TV. Each time it turned back off after about 3 seconds. When we disconnected the Y-Main PCB the TV stayed on and I got the sound back, but no picture. We then disconnected the buffer PCB's from the Y-Main to ensure they were not the problem. Finally, we pulled the fuse on the Y-Main PCB and reconnected the data ribbon and the TV and sound stayed on again. I found a site that sells the Y-Main for $179 and I am deciding whether to try it or not. Any suggestions or comments would be helpful.
Posted on Jan 25, 2008
If you use a tv dish or cable box you could program the cable or dish remote to control your tv. Look up the codes online
Posted on Jan 20, 2009
Tips for a great answer:
Jan 16, 2016 | Sanyo Televison & Video
Nov 29, 2015 | Sanyo DS31520 31" TV
Apr 27, 2010 | Sanyo DS24425 24" TV
Feb 12, 2009 | Sanyo DP32746 32 in. LCD Television
Dec 13, 2008 | GE JASRM24912 Remote Control
Dec 31, 2007 | Sanyo VHR-H607 VHS VCR
Jun 30, 2007 | Sanyo DP32746 32 in. LCD Television
Jan 09, 2016 | Sanyo 42 in. LCD TV
202 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: