Question about JVC KD-G310 CD Player

1 Answer

Setting time I can not change the time on my radio - can you help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: Setting time

To all of these, call the manufacturer, they shouldn't have a problem telling you how to set it...setting the time on an aftermarket HU is an art ;)

also check online (once again from manufacturer) for online instruction manuals.

Posted on Aug 09, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I need help on setting the clock on a pioneer dehp3100 radio

Setting the Time
This is the mode for setting the time on the unit's clock display. (Refer to page 36 for details concerning the clock display)

1. Select the time setting mode in the Initial Setting Menu.
2. Select "Hour" or "Minute" with the Left/Right arrow buttons.
3. Set as desired time with the Up/Down arrow buttons. As soon as you switch to "Minute", the seconds start counting from 00.
Hope this helps (remember to rate this answer).

Mar 31, 2011 | Pioneer DEH-P3100 CD Player

1 Answer

I bought a car with this model, 6cd/cassette

Setting the clock:
1.Press and hold the Band Button (on the left of radio)and the Clock setting button (button No:4 on the right) to display the clock.

2.Press and hold the Band button and the Clock Setting button again for 2 seconds or longer for the clock display adjustment.
3.Press the SEEK UP Button (on the right of the radio with the arrows) to set minute.
4.Press the SEEK DOWN button to set hour.
5.Press the Band button to confirm the clock setting.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Nov 25, 2009 | Clarion ARX6670Z Cassette Player

1 Answer

Setting clock on pioneer radio

you will need to turn unit off then press function button for a few seconds this will take you to the clock function.

Sep 04, 2009 | Pioneer XM CD REMOTE MOSFET50 EEQ

2 Answers

My Sony CDX-C680...

Hello greggerika,

It's possible that the "illumination" wire is not connected or connected improperly. It's also possible that the front panel electrical connections are not making proper contact. Remove the front panel and gently clean the contacts with a pencil eraser.

Also, the CDX-C680 allows you to select either green or amber illumination. One or the other may be defective. Try changing it. Press SHIFT - press "3" (set up) three times - press "5" (right arrow) to change the setting. Also check the setting for "dimmer". ON will result in a dimmed display at all times. AUTO will dim the display whenever the headlights are turned on (if the wiring is connected properly). OFF will result in the brightest display at all times.

Hope this helps.

Jun 13, 2009 | Sony Car Audio Receivers

1 Answer

Setting the time


Mar 18, 2009 | JVC KD-G140 Car CD Player

2 Answers

Car radio - setting the clock

1. click on S (select) and choose clock and hold it (?) 2. click on bar v|<< >>|> to select H or M or Seconds 3. adjust it turning the volume button 4. repeat steps 2 and 3 for minutes 5. repeat steps 2 and 3 for seconds

Dec 12, 2008 | JVC KD-G510 CD Player

3 Answers

Setting time on clock

Press "Title" until time is displayed. Then press and hold "Title" for a few seconds until time is displayed. Turn the silver knob to change the hour, after hour is set, press the silver knob to activate minutes. Turn sliver knob to change minutes. Press silver knob to end.

Feb 15, 2008 | Alpine CDA-9811 CD Player

1 Answer

Clock Setting ?????

When a station is tuned in the unit will decode the incoming clock data after 2 minutes will display the correct time when the 'DSP' button is pressed.
Note: some stations do not transmit a PTY or CT information & therefore the clock display may not be available.
For clock setting it is recommended to tune to a National Radio Station.
Hope This Helps.

Nov 12, 2007 | Goodmans CD / MP3 car radio GCE780MPT CD...

15 Answers

Time change on Pioneer car radio

Turn the raido/cd player off. Hit the clock button. Time will display. Press and hold down the audio button for 4 seconds. Use the arrow keys to change time. Press and hold the audio key when finished until the time is done flashing.

Nov 07, 2007 | Pioneer KEH-P2030 Cassette Player

1 Answer

Setting the time and date.

This is for the closest model I could find, hope it helps!

Aug 09, 2007 | Pioneer FH-P404

Not finding what you are looking for?
JVC KD-G310 CD Player Logo

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio Receivers Experts


Level 3 Expert

93922 Answers

xxxxxx xxx

Level 3 Expert

4679 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides