Question about Desa International White Wireless Plug In Door Chime

1 Answer

Id like to change song on my doorbell Dimango model 4330 r cd chime reciever

Cd chime reciever ( door bell) I am searching for instructions on how to change the sound on my door bell.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

  • Expert
  • 164 Answers

The webpage http://www.dimango.com/dc-cd-quality-doorbells.htm

shows:

Wireless Doorbell CD Quality Door Chime
Model RC4300

No longer do you need a wired door chime or traditional doorbell with brass tubing to get amazing, rich sound. Our Battery Operated Door Chime from Dimango has CD quality sound while remaining completely wireless...







  • Plays three selectable sounds



    1. Ding Dong


    2. Dong


    3. Westminster Chime Click To Hear Sound!




  • Set sound conveniently at button




It seems that there is a button on the receiver/speaker. Try press once and see if the sound changes.

Posted on Nov 27, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: my doorbell also ring neighbor's bell

Change pin configuration on plugin bell and the remote.
The pin configuration should match

Posted on Dec 30, 2008

SOURCE: Wireless doorbell rings by itself

Doorbell button is sticking or slightly pressed in. Check to see if cover is installed correctly. It may be on on one side.

Posted on Aug 31, 2009

  • 18 Answers

SOURCE: How can I change the frequency on my wireless

Not sure of this model so suggest you give them a call on

01925 712000

Posted on Nov 04, 2009

  • 1 Answer

SOURCE: 'Doorman' chimes keep chiming, without bell being pushed

I had the same problem - turned out to be a cordless phone nearby. If you have one, try moving the bell away from the phone or vice-versa. Another possibility is a neighbour with the same code. There are some jumpers you can move around to change this.

Posted on Apr 22, 2010

  • 28 Answers

SOURCE: My Desa Specialty doorbell doesn't ring..I have

Batteries are located in the doorbell push button case in the back. Slide open a compartment to reveal the batteries.

Posted on Sep 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WIRELESS DOOR BELL BUTTON SL-1695-rx


Heath/Zenith SL-6166-C Wireless Plug-In Door Chime Kit ...

www.amazon.com > ... > Door Chimes & Bells > Kits
Amazon.com, Inc.Heath Zenith SL-6198-B Wireless Doorbell Replacement Battery. Total price: ... Plug-in doorbell chime, doorbell button/transmitter with battery, hardware pack ...

Oct 16, 2015 | Home Security

3 Answers

Phantom bell rings on Siemens wirreless door bell chime jsjs-204, I do not have instructions


You may need to change the frequency of the chime. In this model, you need to remove the batteries from the receiver unit and wait for a while. Then replace the batteries. The doorbell unit should automatically set itself to a different frequency once you press the button, which will(hopefully) solve the problem.

It seems impossible to find the instruction manual for the doorbell. But see http://oddsnsods.net/blog/?p=68 who had a similar problem with a different Siemens model, which works on the same principles. (I can't seem to be able to remove the battery from the door bell unit on the jsjs204, but it reset itself after changing the batteries in the receiver).

Nov 01, 2011 | Desa International White Wireless Plug In...

1 Answer

When door bell is pushed the chime unit playes through all of the songs instead of just one.


The unit is receiving electricity so low-voltage transformer and button are working correctly.
Only suspect left is door chime itself.
Check that voltage of transformer matches voltage of chime.
Use cheap multimeter from home center and check voltage at chime, or check transformer.
Doorbell transformers are usually located in basement or garage or attic, and most are hardwired into octagon box.
There are no replacement parts for door chimes.
Buy new one, or contact seller for refund if this is new chime.

Apr 04, 2011 | Heath Zenith Electrical Supplies

2 Answers

Why does chimes sound when no one as pressed bell


water can get into the button on door inside is a spring that pushes a part of the switch away from the other and when someone presses it they join together and bell sounds but if the rain gets inside it can make an electrical connection between the two points open it up and see if there is any trace of water the just put a bit of pva glue over the top join on the switch it will water proof it and will also be easy to remove or it could be a low battery or if mains anything can set them off mobile phones tv any thing that sends a rf signal its best to have as small a gap as possible between the two units

May 20, 2010 | Desa International White Wireless Plug In...

3 Answers

Hello I have now got 2 (two) of these units over the past 8 months and neither work----changed batteries--interchanged push button---changed main unit--nothing works----but when my neigbour across road has...


The doorbell buttons and your receiver must be on the same channel. If you will get out the directions that came with your unit, they will describe the process to go through to reset the specific "codes" for your buttons and receiver.

Jan 04, 2010 | Desa International White Wireless Plug In...

1 Answer

I changed the batteries on my door bell, and it still wont ring


Troubleshooting
Chime does not sound:
• Make sure the doorbell button and the chime codes are the same (See pages
2 and 3).
• Check orientation of doorbell button battery (See page 3).
• Check the doorbell button and chime batteries, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
• Do not mount the chime or doorbell button on metal or near metal studs. This
reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to
move the chime or doorbell button off the metal surface.
• Don't mount the chime too close to ground level concrete slabs. This may
also reduce the range. Mount the chime away from the floor.
• Try different locations for the chime closer to the doorbell button. Also try to
orient the chime at a different angle to increase the range.
The range of the doorbell depends on location, temperature and battery
condition.
Regulatory Information
This device complies with Part 15 of the FCC Rules and RSS-210 of Industry
Canada. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by
the party responsible for regulatory compliance could void the user’s authority
to operate the equipment.
Technical Service
Please call 1-800-858-8501 (English speaking only) for assistance
before returning product to store.
If you experience a problem, follow this guide. You may also want to visit our
Web site at: www.hzsupport.com. If the problem persists, call* for assistance
at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available:
Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product

Jan 02, 2010 | Desa International White Wireless Plug In...

1 Answer

My doorbell also ring neighbor's bell


Change pin configuration on plugin bell and the remote.
The pin configuration should match

Dec 29, 2008 | Desa International White Wireless Plug In...

Not finding what you are looking for?
Desa International White Wireless Plug In Door Chime Logo

869 people viewed this question

Ask a Question

Usually answered in minutes!

Top Desa International Home Security Experts

Steven R

Level 2 Expert

100 Answers

Julian Pearson

Level 1 Expert

20 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Desa International Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...