Question about Measuring Tools & Sensors
Posted by Anonymous on
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: How to basically operate my
Press the red button - (distance) you will see a red dot on the wall you are measuring - then you will hear a beep - release the button and read the display - the measurement should be displayed and accurate within a quarter inch.
Posted on Nov 23, 2008
1. Make sure the side lock is unlocked.
2. Push the thumb tab all the way to the front of the blade handle.
3. Insert the blade in the opening, you may notice two notches on the top side of the blade.
4. Press the small blade release button as you slide the blade into the knife. You may have to jiggle up and down to get the two notches on the blade fully into the handle.
If properly inserted, the exposed area of the blade should look very close to an equilateral triangle.
make sure both notches of the blade are inside the handle. They notch into the thumb lever.
Posted on Apr 11, 2010
Testimonial: "Thanks so much!"
On the side there is a big gold wheel, twist counter clockwise and the case should split in half, the blade is held by a magnet, prise the old blade off and replace with new one, then put case back together and tighten gold wheel clockwise
Posted on Mar 07, 2011
Easy enough. Here is the link:
Hope this helps
Please rate FIXYA
Posted on May 20, 2011
Testimonial: "Thanks for the fast response. Just what I needed."
Tips for a great answer:
Mar 04, 2016 | Measuring Tools & Sensors
Jan 12, 2015 | Stanley Measuring Tools & Sensors
Nov 03, 2014 | Measuring Tools & Sensors
May 01, 2014 | Hardware & Accessories
Oct 08, 2013 | Select Products Stanley 5 Beam Laser Level...
Apr 08, 2013 | Cross Cst Stanley No.CL2 Fatmax Line Self...
Mar 05, 2012 | Stanley Measuring Tools & Sensors
Feb 11, 2011 | Cst Stanley 77189 FatMax PB2 SelfLeveling...
Dec 24, 2009 | Cross Cst Stanley No.CL2 Fatmax Line Self...
Nov 16, 2008 | Stanley 100 ft. Tape Measure, FatMax
158 people viewed this question
Usually answered in minutes!