Question about Samsung Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have to open the front panel as though I were going to replace the toner cartridge, but, instead I pull out the toner reclamation cartridge (the gray "L" shaped one to the left of the cyan cartridge) and then put it back in. This has cleared it each time for me.
Posted on Jan 15, 2009
I suggest you download the latest version of the print drivers, uninstall the old ones first. Also, check to see if your program has any updates. Does it do it on other programs as well?
If so, there is a driver issue not properly talking to Vista.
If it works on other programsl, its related to the program itself.
Posted on Dec 12, 2009
I had the same problem and look it up in service manual,
there the say Home of development is not checked or checked at a abnormal time. solution Clutch of development or mainbord must be checked.
when i opened the right side cover i vind out that the development clutch moved two parts do it was suppose to move one part, when i tightened the spring on the solenoid the problem was over and the clutch stopped at the right place. its easy to do.
Posted on Mar 12, 2010
This sounds like a registration problem.
Use the menu (on the printer) to print antest page AND a configuration/information page.
Look (critically) at the alignment of the seperate coloure Yellow Magenta Cyan. You will probably find that these are out of aligmnent across the page.
The cause of this, is that the printer can't perform a calibration properly (printer probably takes a long time when calibrating too) and is usually down to failure of one of the sensors on the transfer belt.
Sometimes you can clean these and solve the problem, but often is a failure of the component itself. Thes are NOT available as a spare part, and the repair to correct this would need a replacement transfer belt.
Transfer belt replacement in this printer is quite an involved task, though it is within the capabilities of someone with reasonable mechanical aptitude.
Posted on Apr 05, 2010
Tips for a great answer:
Oct 25, 2012 | Samsung CLP-315W Laser Color Printer
May 13, 2010 | Samsung CLP-315W Laser Color Printer
Mar 23, 2010 | Samsung CLP-315W Laser Color Printer
Apr 15, 2009 | Samsung CLP-600N Laser Printer
Apr 09, 2009 | Samsung CLP-510 Laser Printer
Jan 21, 2009 | Samsung CLP 315 Laser Printer
Jan 05, 2009 | Samsung CLP 300 Laser Printer
54 people viewed this question
Usually answered in minutes!