Question about Rangemaster Toledo 110 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range

2 Answers

Warmer lights up but not getting hot - Rangemaster Toledo XT

Does anyone know why the warming plate wont warm up, the lights on but no heat ?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi Sally

I havd exactly the same problem. I contacted Rangemaster/Aga support line (0845 603 5312 if in warranty, 0870 789 5107 if not) and they told me the heating element was shot.

My cooker is 2 1/2 years old, so out of warranty, but they were good enough to send me a new cooker top (top left hand side only of course) free of charge!!!, I just have to get it fitted.

You have to replace the whole left hand side of the cooker top too - the burner that the wok goes on!

Good luck

Posted on May 31, 2009

  • DInternetY May 31, 2009

    Quick update - I downloaded the instruction manual from the rangemaster website, and the instructions on how to do this are in there, so I did it myself - took me 20 minutes, all working well now,



    Good Luck

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We had the same problem. The one of the wires soldered to the underside of the warming plate had fell off due to poor soldering.The warming plate and the warning light are connected together with piggy back connectors so that is why the light is on even when the warmer is cold,.
You must have been lucky as when ours fell off it shorted out on the cooker chassis with a spectacular shower of sparks.
regards

Neil


Posted on Jul 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The hot warning light on my rangemaster110 warming plate has stopped working but the warming plate still works fine


Two possibilities, either the bulb has failed, or the temperature sensor in the top has failed. Neither is likely to be an easy or cheap replacement.

May 17, 2015 | Rangemaster 110 (Gas) Kitchen Range

1 Answer

My warmer plate light does not work and the water in holding tank feels warm on top not on bottom,coffee is not hot enough to dissolve powderewd creamer.Why?


No warmer plate llight:
Usually means bad switch. Bunn Part no. is 20316.0001. Replacement available at link below.
Bunn Home On Off Warmer Control Switch Lighted

Note differences in switch wiring in photo below between old and new style switches.
24915397-wajh22jgqqim5mofp4quohsx-3-0.jpg

Coffee not hot:
Make sure "Vacation Switch" is in OFF position.

Aug 07, 2014 | Retail Supplies

1 Answer

What is Radiant Floor Heating System anyone can tell me?


I think the concept behind the Radiant Floor Heating System is that Installed tubes or heating element, which contains water beneath the floor, which warm our floor. For more information about Radiant Floor system you can check this site.http://www.ps2i.biz/

May 28, 2013 | Mountain Plumbing Plumbing

1 Answer

My Conair Proshine Straightner won't warm up, although the light is on. How do I fix this? ... hot plates not heating and the light says its warming up but the hot plates won't heat up


Most heated hair appliances are protected by a thermistor that will fail if overheated. These are small, about 1/2" long, cylindrical in shape with a pointy end and a wire coming from each end. When they go bad, they do not conduct electricity (zero ohms on a meter). There is a three digit number on the side that is the shutoff temperature. You can get these at Radio Shack.

Don't bypass this safety device.

Jan 07, 2011 | Conair Professional Ceramic Hair...

1 Answer

Water wont heat. Warmer has no heat but light is on


Hello, One of the wires soldered to the underside of the warming plate had fell off due to poor soldering.The warming plate and the warning light are connected together with piggy back connectors so that is why the light is on even when the warmer is cold. Bye

Jul 03, 2010 | GE 106591 Coffee Maker

1 Answer

Bike will start and warm up fine. After riding till its up to operating temp (running fine) no missing or other problems if you shut it down it wont start back up- it just pops and backfires. Only way it...


the igntion module on the right side of the motor is probably bad its a typical issue with sportsters, if you heat the area around the timer cover with a heat gun and then try to start the bike and it wont start then you know its the ignition module on the sensor plate.

May 14, 2010 | 1993 Harley Davidson XLH Sportster 883

1 Answer

Rangemaster 110 oven heats by itself


That happens either because the timer control is faulty, or because there is a contact on the element wires or connectors, and the element is grounded.

Control board and wiring harness are tested using a multimeter.

Enter the model number on one of two websites below to get parts and diagrams for your appliance:


Appliance Parts From PartSelect

Appliance Parts Pros

May 17, 2009 | Rangemaster Professional 90 SS (electric)...

1 Answer

99 HD softail stalling problem


If this is occuring everytime you ride the bike and always when it gets warm. I would think there is a good chance that the sensor in the timing cover is getting hot and then developing a short. You can replicate this synario by taking a hair dryer and warming the cam cover around the timing plate, if the bike wont start after warming the timing cover then you have a bad ignition sensor plate. if the bike still starts you can also try the same technique with the ignition module itsself which should on that model be located behind the battery. heat causes shorts in those 2 items quite often. try it out and let me know what happened.

Mar 31, 2009 | Harley Davidson FXSTS Springer Softail...

Not finding what you are looking for?
Rangemaster Toledo 110 (Dual Fuel) Dual Fuel (Electric and Gas) Kitchen Range Logo

1,756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rangemaster Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

171 Answers

Paul Carew

Level 3 Expert

3284 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Rangemaster Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...