Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

2 Answers

When I plug in my jump drive it is not showing up on the computer and the light is not coming on.

Posted by on

  • 2 more comments 
  • Anonymous May 09, 2009

    When I plug in my Cruzer Device, my USB slot whirs for a second then stops, and the computer dosent find it and the light dosent come on. I tested it on 4 other computers and the same thing happened on all.

  • cat96 May 10, 2009

    i hav the same thing only the light turns on for 3 sec the turns off and it works in other compers, and the use port is not shot because i use my printer in it

  • soumitra_for May 11, 2009

    When I plug in my jump drive it is not showing up on the computer and the light is not coming on

  • Anonymous May 13, 2009

    when i plug it into my pc it does not show up and the light show a red or orange look to it



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem my computer denied the flash drive because i put it in the day before and it crashed the computer to the point i got the blue screen of death

Posted on May 10, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Either the usb port on your computer is shot, or the drive is shot altogether. you may just want to get a new one. mine cost $9.87 and it's the same as the one you have.

Posted on May 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Acomdata hd500ufape572 not mounting, light comes on but does not seem to power up

The drive may have quietly expired while it was idle. The indicator could mean simply that power is getting to the drive but not going anywhere internally.

Mar 14, 2014 | Computers & Internet

1 Answer

I plug my jump drive in to my computer and nothing happens, the light does not turn on and it doesnt show up on the computer, i have a very important paper i need to complete i need help now!!

Try connecting to a different USB port.
Try connecting to a USB port on a different computer.

If neither works, then your device has "failed". Permanently.

Nov 21, 2010 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I have a montero 96 model geep and it used to ran down my batteries and they test the alternator it con-farm charging well but when i start the engine the batteries sign on dashboard will not show but a...

you did not mention in your post that you actually had to "jump start" your vehicle so I can only assume that the dash light is the concern

in other words, there is a short in your alternator warning light

if however, you actually have to jump start the vehicle then your battery drain could be coming from just about any one of the 6 computers on your vehicle and/or just the fact that you do not use/drive your vehicle enough

for this vehicle you MUST drive at least 20 minutes at highway speeds to recharge the battery

multiple short trips in a week will be enough to kill even the BEST batteries

Sep 04, 2010 | 1994 Mitsubishi Montero

1 Answer

Upload data from memory stick to desktop


When you say memory stick im assuming you mean something such as a usb jump drive (thumb drive) or an sd card ( ex. for a digital camera)

A usb thumb drive you would plug into an empty usb port. Open My Computer or Computer in the start menu.

You will see your thumb drive appear as a drive. You can double click on it to open it and see the data stored on it. From there you can copy it anywhere you want on your pc.

If you are talking about a memory card for a digital camera etc then you need a card reader for your computer. You would plug the card reader in via usb. Plug the card into the appropriate slot and it would show up in my computer just like a jump drive would. Again you can save the data however you would like from there.

Thank you for choosing fixya!

Feb 16, 2010 | Dell Inspiron 530 Desktop Computer

1 Answer

2gb jump drive not working

There are two major possibilities:
1: There is hardware or software problem with your computer's USB ports. To test this, plug the drive into a different computer if you can, and try having it plugged into your current one while you turn the computer on.

2: The issue is with the Jump Drive itself. If the drive fails to show up when plugged into a different computer this is the likely problem. The data CAN be recovered, but if it won't show up on any computer, the only real way to do so would be to pay a Hard Drive recovery shop.

Sep 21, 2009 | Verbatim VER95327 USB Hard Drive

1 Answer

Wont show up on the computer

Jump drive worked last night. Today...nothing. any whole life is on this thing.

Apr 15, 2009 | SanDisk 2GB microSD Memory Card

1 Answer

Unable to read Lacie external drive


Try right clicking Computer (in the start menu or shown on desktop as "My Computer") and clicking Manage. Then when that pops up, jump into Disk Management (left hand side). See if it shows up there. Often it can just be the fact that you need to right click the drive and click "Change drive letters". Post back if it doesn't show up there and we can try some other troubleshooting.

You could also try checking to see in Device Manager (also in that manage screen to the left bit) and then click Disk Drives and see if it shows up in there at all.

Dec 10, 2008 | Computers & Internet

1 Answer

Red Light/Blue Light I/O Error

My nx2 is working again after having the "red light/blue light/I/O Error" problem. I just:

1. turned off my computer
2.unplugged the HD,
3. took out the HD from the enclosure and plugged it back into the enclosure,
4.started up my computer without the HD being plugged in
5. after my computer had been on for a minute, I plugged the HD in and my computer recognized it and had the proper mixture of red and blue light coming from the HD, indicating it's working properly.

Good luck!

Aug 26, 2008 | NexxTech Portable Hi-Speed USB 2.0 Kit...

2 Answers

Toshiba 4mb jump drive

try to jump from one usb slot to another until your computer recognizes your flashdrive.

Mar 25, 2008 | Computers & Internet

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Computers & Internet Experts

Arora Singh
Arora Singh

Level 2 Expert

180 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Sandy Moore
Sandy Moore

Level 2 Expert

111 Answers

Are you a SanDisk Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides