Program a sony rm-adp015 remote to a sony 5.1 str-ks360 receiver

If the remote is functionally the same as the original RM-LP204

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Sony-STR-DE845-Receivers-manual/id/387ci973/t/2/

That is true.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Sony-STR-DA80ES-Receivers-manual/id/930dj592/t/2/

A substitute for the RM-P501 is available for $48 plus shipping...

http://remotes.com/remotes/servlet/rs?a=gmi&smodel=STRDA80ES&brand_pn=SONY_STRDA80ES&mode=large&uuid=A13004461623871

The primary remote model is RM-LG112

The Sony RM-YD029 Remote control will work with the Dish Network VIP722 DVR HD Satellite Receiver, but the Dish Network VIP722's Primary remote address must be set to 1.

The procedure below will allow Sony RM-YD029 remote control to operate Dish VIP722.

Using the Dish Network Remote Control -
1. Press menu 2 times to get to system info page
2. In the system info page the primary remote address is in a white box (bubble) followed by a Green TV (1)symbol that says IR and indicates you the channel your remote control one is configured. The Sony RM-YD029 will work when this primary remote address number (in the white box) is set to 1.

If the Primary Remote Address of your VIP722 Remote control 1 is not set to channel 1, here is how to change it:

1. While displaying the system info page, press and hold the SAT button on your dish network remote until all other modes are flashing, about 3 seconds.
2. then press the '1' button on the numeric pad of your dish remote
3. then press the '#' button on the numeric pad of the dish remote
4. then press the 'record' button (red dot button - stores setting)
5. At this point you should see a number 1 in front of the primary remote address on the dish system info page

Ensure you enter the corresponding IR code into your Sony remote control per the instructions in the manual or Sony's web site. My 722 works with Sony IR code - 01775.

You need following remote for STR-K740P

147720411 RM-U306 REMOTE CONTROLand it is available, click Sony Accessories Store, for $35

http://www.dvdremotecontrols.com/Mfrs/Sony/SonyAudio/RM-P341.htm is a website for finding the Original remote for your str-d1015 your remote model is RM-P341 and the link above will direct you to information on the remote as well as where to buy it and how much PLUS A PICTURE :-) hope this helps you

You may wish to clear the remote's memory before starting. Slide the top left switch to "Learn." Press ANY button on the remote, do not worry if the indicator light flashes. Press the "Program Clear" button. The indicator should flash 4 (maybe 5?) times. You are now ready to program. Make sure the switch is in the "Learn" position. Place the rm-p311 and the remote you want to program in about 2 cm apart facing each other. Push the button you wish to program on the rm-p311. The indicator light should come on with a slight delay. Press and hold the button on the other remote until the indicator light goes out. Put the slider back to "User" mode and test it! For more info., go to sony's support site and search for the user manual for the STR-AV1070 receiver. It contains instructions for the remote.

To reset the remote control to the factory default settings, simultaneously press the POWER , TV/VIDEO , and VOL- buttons. Go here for programming instructions; http://esupport.sony.com/US/perl/model-remote.pl?mdl=RMPP412

If this is a recent occurrence, unplug receiver for 20 minutes. This will reset the receiver. If the remote is programmable, reprogram it for the receiver. If you do these steps and it does not work, you need a different remote.