I need a code to allow me to operate sky from my samsung tv remote

New 3 digit codes for DVD/VCR, DVR/SAT, TV/VCR, TV ...

www.eliztech.com/remotes/ge-new-3digit-combo-codes.php

DVD/VCR, DVR/SAT, TV/VCR, TV/DVD, DVR/CABLE and DVR/DVD combo codes for GE/Jasco three digit universal remote controls purchased after ... 3 digit codes for GE Universal remotes purchased after August 2002 ... PANASONIC, 437.

[PDF]Manufacture Code List

https://www.att.com/support_media/images/.../set-up-code-list.pdf

AT&TDVD VCR COMBO. VCR. HTIB. REC TUN. AMPLIFIER. TV. Abex 1098. Admiral ....Panasonic 1003, 1010, 1049, 1053, 1096, 1123, 1152, 1231, 1289,. 1292 ...

Remote Control Program Codes - FTC - Farmerstel.com

you need to connect the satellite box directly to the VCR and record

Note: most remotes allow you to find the code by manually turning the TV (or other device) on first, then press the appropriate button (cable, DVD, surround, etc) then setting the the remote in the "program" mode, then keep pushing the "off/power" button until the TV (or other device) turns off, at that point the code is set.

Note: most remotes allow you to find the code by manually turning the TV (or other device) on first, then press the appropriate button (cable, DVD, surround, etc) then setting the the remote in the "program" mode, then keep pushing the "off/power" button until the TV (or other device) turns off, at that point the code is set.

Universal remote codes are determined by the maker of the universal remote, not the maker of the tv, unless they are both made by the same company. Determine the maker of the universal remote and it's model number, then go to the universal remote makers website and look for codes under the name of the tv (or dvd, vcr, etc) that you want to program the universal remote to operate. Programming instructions should be on the universal remote makers site as well. I hope this helps. BobYa

Hello

Three digit universal remote code for Samsung Tv are:
002 012 102 103 112 212 502 512 818 914

Four digit remote code for Samsung TV/VCR/DVD combo is
0942
DVD/VCR cobo are:-
0455 0963

TV/DVD combo is
0942

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

OK.

Hi

Samsung
4 digits: 0060
3 digits: 065, 584, 037, 245, 476, 398, 516, 292, 318,037

Samsung (6000 series)
4 digits: 1340

As you used 0060 and it didnt respond please try to programma with the other 3 didgit codes.

If still you cannot programme it follow the below instruction:

1. To control your TV firstly switch on the TV set, point the Sky remote at the TV,
2. Press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice.
3. Continue with this process by continuously pressing "TV" then "Standby" then "TV" then "Standby" etc until the TV set switches off. This will start using the inbuilt codes to programme the remote.

Thanx

The codes available for the URC 3300 will only operate TV's, VCR's, TV / VCR, Cable Boxes and Sattelite.

There are no codes for DVD's.

i have the same problem with the codes 0035 0125 0049 everything works except turning the volume up. have you found a solution yet???

1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!