Question about Crown I-TECH 6000 Amplifier

2 Answers

I boughta Crown IT6000 approx 3 years ago.the first year it worked fine.Upon the begining of the second year,i wasusing it at a gig and all of a sudden the amplifier went into thermal and shut down.It was sent to the company and it took me almost a year to get it back,not to mention the price of repair!Anyhow,upon receiving it,i used it on trial at a wedding gig.4 hrsinto the gig,a pop was heard and the amp shut down,never to be restarted.up to this day i havent received that amp from repairs andthat wedding was February 2013. I do not even want advice from Crown anymore.their service SUCKS!!!!

Posted by Anonymous on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Crown Master
  • 924 Answers

Your unit is a Harman Kardon product. Did you send it to Harman in Northridge, CA? I use to work for them as an audio specialist.

Posted on Oct 28, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Crown Master
  • 3,368 Answers

Contact them with this link: http://www.crownaudio.com/en-US/support

Posted on Oct 24, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ganx
  • 113 Answers

SOURCE: The fault light immediately comes on my Crown XLS

Hi try disconnecting the speaker outs and turn off bridge (if its on) If it doesnt work still, then suggest direct to a crown agent. The amp has a 3 year no fault warranty. Hopefully its still in!

All the best

Posted on Aug 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MasterTemp 200 cycles every 30 seconds


since you already replaced the thermisto next would be the control board

Apr 18, 2014 | Pentair Pool & Spa

1 Answer

Crowm micro-tech 2400 goes straight to protect upon start


Ok,

Lets get this straight, you are saying that a CROWN MICRO-TECH2400 power amplifier show the two front red lights when you turn it on? Because it supposed to do that if everything is fine, when you turn your amp on and one of the lights or both don't turn on then you have a serious issue with this great amp, keep me informed in case you need further help.

Nov 07, 2013 | Crown Audio Players & Recorders

1 Answer

Setting time for citizen eco-drive E764-S066701 HST perpetual movement


No need to take the back cover off or anything like that. You don't need jeweler either. You just need to pull the crown to first "click" and the turn the crown to the right to correspond to the month that you are setting the time in. Between 1 and 2 o'clock represents January. Between 2 and 3 is February and so on. Once you get to the beginning mark of the month you are in, count how many years have passed since the last leap year. If it's 2 then put the second hand to two minutes after even (beginning). If it's three, move it to three minutes after. If it's leap year, you just put on exact (beginning) mark of the month you are in.

That would be it. Like I have said, no need to visit jeweler or do any disassembling. Also, you might this find interesting. The steps above are for E764 calibre. This site gives you manuals for pretty much all of them.

Jul 06, 2012 | Citizen Eco-Drive BL006056H Wrist Watch

2 Answers

Need an expert on the new minute repeater by campanola, sold one at the retail jewelry store i work at, gentleman wants step-by-step hands on instruction as to the minute repeater function as well as the...


in order to set the repeater chime you need to set the watch and the sub watch to the same time.

This watch has comes with crown in position 0 , if you pull it out one level it becomes position 1 and if you pull it out one more time it is position 2 .

There are 3 buttons on the watch also. The button directly above the crown is button A the button below the crown is button B and the button directly across the crown is button C.

To set time you must first pull out crown to position 2 when the small second hand is at 12 o'clock position and it is stopped.

The mode will also at this time go to 0 and the sub watch second hand( the long second hand with the sun on it ) will also go to 0.

At this time you can just move the crown to set the proper time to the main watch . Now if you press the B button to set the sub watch . Each time you press the B button it will advance one minute hold down the B button and will advance time faster.

Do this to set the sub watch time make sure you watch the am and pm to make sure you are getting the proper time of day.

if the sub watch second hand ( the long second hand) is not aligned to 12 oclock then press the A button keep pressing button or hold it down to go faster until it is aligned at the 12 oclock position

Now push crown in back to 0 position for your time for your watch and sub watch should be set.

Set leap year.
Pull crown to position 1
Press the B button to adjust leap year.
the leap year is set by how many years from the previous leap year it has been . So 2008 was the previous leap year so we will h ave to set leap year at year 2 . The hands of the leap year are connected to the month so you must hold down a and b button or just press the b button to get to year 2 .

once you do that your leap year should be set.

to set the Repeater ( this is a beep from the watch to tell you the time with sound) make sure crown is in 0 position and hold a button for a couple of seconds to activate Reapter.

you can press any other button to end the chime .

also to get to leap year view while crown is in 0 position hold down the b button for 2 seconds . Pushes any button to return to normal calendar.

Oct 16, 2010 | Citizen Campanola Perpetual Calendar...

1 Answer

Changing the date on a fossil watch- how do you do it?


Which Fossil do you own?

Analog Date Watch:
Date Setting
  1. Pull the crown out to position 2.
  2. Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction that moves the date varies on different watch models.

Analog Automatic:
Time and Date Setting

  1. Pull crown out to position 2 and rotate clockwise to set time.
  2. Pull crown out to position 3; date will advance automatically. To set to required date, continue to rotate crown between positions 2 and 3.
  3. Push crown back to position 1.
Analog Digital:
Time and Calendar Setting

  1. Press and hold pusher A for 2 seconds to enter setting mode. Year will begin flashing.
  2. Press pusher A to select year, month, date, hour, minute, second, and then exit setting mode.
  3. Press pusher B to adjust digit.
  4. Press and hold pusher B to adjust digit automatically.
  5. If no pushers are operated for 30 seconds, setting will be returned to Normal Time Display.





These are the three most common Fossils. If yours isn't here please let me know which model you have and I'll get you the instructions.
Hope this helps.

Dec 12, 2009 | Fossil Watches

1 Answer

The fault light immediately comes on my Crown XLS 602 power amp immediately upon turning it on. It will not go out?


Hi try disconnecting the speaker outs and turn off bridge (if its on) If it doesnt work still, then suggest direct to a crown agent. The amp has a 3 year no fault warranty. Hopefully its still in!

All the best

Aug 04, 2009 | Crown XLS 602 2-Channel Amplifier

1 Answer

Shadows on screen


Try moving a medium powered magnet (not one for picking up heavy objects and not a refrigerator holding one) over the distorted area. If that doesn't work, try a more powerful one. This worked for my Toshiba LCD. Good luck!

Jan 04, 2009 | Sylvania 6626LCT 26 in. LCD Television

2 Answers

No Display on my Samsung 204B monitor


If you know how to open it up and get to the power supply you will find three capacitors 2-820uf and 1-330 @ 25vdc 105o.they will have puffed up tops replace them. FYI the monitor has a 3 year warranty.

Dec 12, 2008 | Samsung SyncMaster 204B 20.1" LCD Monitor

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Crown Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Paul Bade

Level 3 Expert

1516 Answers

Are you a Crown Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...