Question about Home

1 Answer

Hansgrohe axor repair

We have an Axor Tap 10010USA and it leaks when we turn it on how do we repair

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 12,223 Answers

Follow this steps and fix it. God bless you
f a faucet leaks, replace seals and gaskets . If a shower head leaks, create a better seal or replace seals.
If a sillcock wears out, replace the washers .
If a compression faucet drips from the spout, replace the washer and/or the seat .
If a faucet leaks from the handle, replace O-ring(s), replace the packing washer, tighten the packing nut, or replace worn packing, depending on the valve type .
If a ball or cartridge faucet leaks from the collar, replace worn O-rings .
If a disk faucet leaks around the base or has reduced flow, replace cracked or pitted disk assembly or worn inlet seals .
If there is water under the sink, tighten the faucet-set locknuts under the sink. You also can replace putty or a gasket, replace a worn faucet, or replace leaky supply tubes
If the aerator leaks around the edge, replace the washer in the aerator
If the spray hose leaks or has reduced flow, replace the O-ring on the diverter valve, replace a worn washer at the base of the spray head, or clean the diverter valve and spray head

Posted on Nov 26, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you unscrew hansgrohe axor carlton showerhead?


It would be the reverse process as illustarted in yhe "how to" install video...http://youtu.be/11xZMhO_h18

Jul 26, 2014 | Hansgrohe Home

1 Answer

How do I fix leaking tap?


Get a plumber 2 do this operation 4 U!!!!

Jun 29, 2014 | Hansgrohe 16502821 Axor Montreux 2-Handle...

1 Answer

Axor shower valve wont shut off


Without being able to identify the valve I cannot tell exactly what the cause may be. If you know the model number or need help identifying the unit feel free to contact me at Hansgrohe Technical. 1-800-334-0455. Press 2 for Tech and ask for David Scarborough. I'd be happy to help identify the unit and diagnose what may be causing the issue.

Mar 03, 2013 | Hansgrohe Axor Home

1 Answer

How does the hansgrohe hand held shower head md # 17850831 snaps together


The 17850 is not designed to be taken apart and put back together. They are pressed together in the factory. If it was dropped and came apart it is most likely broken beyond repair. If you need further help fell free to contact Hansgrohe Tech 1-800-334-0455.

Dec 08, 2012 | Hansgrohe Carlton 17850831 Polished Nickel...

1 Answer

Hansgrohe axor faucet jammed


On this model the escutcheons will turn counter clockwise and the whole handle will lift off as one unit. In some cases water deposits can cause the handle to stick and you may need to use CLR to lossen the deposits. In some other cases installers will put the handle on first and then tighten the valve to the deck. This causes the handle to be too tight to the deck and can strip the handle fixation. Try loosening the the valve set below the handle and see if the handle is easier to remove once the valve is loosened. If you need further help feel free to contact me at Hansgrohe Technical Services at 1-800-334-0455. Press 2 for Tech and ask for David Scarborough.

Sep 16, 2012 | Hansgrohe 31063001 Metris S Widespread...

1 Answer

I have a axor Grohe shower head ona rail. It is starting to slide down the rail on it own.


There may be a tension adjustment screw on the slider that you can adjust to add tension between the slider and bar. If it is an Axor or Hansgrohe wall bar You can call Hansgrohe Technical services. We can help you identify and adjust or reapir this unit. Feel free to give me a call at 1-800-334-0455. Ask for David Scarborough. I'd be happy to help.

Aug 23, 2012 | Home

1 Answer

How to adjust water pressure


To adjust the pressure on this type of valve you simply rotate the handle counter clockwise from the off position. As you rotate the handle it will increase the volume as you increase the temperature. Feel free to contact me at Hansgrohe. David Scarborough 1-800-334-0455.

May 06, 2012 | Hansgrohe 06358620 Pressure Balance Valve...

1 Answer

What tool is needed to unscrew/dismantle the Hans Grohe Axor Starck joystick tap; and to stop dripping is there a washer to replace or does one have to replace the whole joystick cartridge? Thanks Craig


This is a pretty difficult model to work on because the bonnet nut is so slim. The way I do it is to dismantle the faucet from the sink. Remove the cap and handle (2mm set screw) and lay the faucet on it's side. Protect the finish by putting it on a towel and lay it on a firm surface such as a table or work bench. Leaving the body and spout on the table, hang the top of the faucet over the edge of the work surface. Carefully lock vice grips onto the nut. Be careful to use just enough tension to secure it to the nut. Dont go too hard, or you will just chew up the nut. Then lightly tap the channel locks with a small hammer or mallet to turn the nut counter clockwise. Do this while pressing down on the faucet body to keep it from jumping. Lots of little taps will loosen the nut which is locked in by mineral deposits from leaking. Once the nut is moving you no longer need to tap it, as it can then be turned by using your hand to turn the vise grip pliars.

Look for an old o-ring in the nut where it meets the top of the cartridge and replace it with the supplied new one. Also replace the two seat washers that sit in the faucet body at the base of the cartridge with the supplied new ones. The newer cartridge will be smaller diameter, but you will see that the height is the same and it works perfectly.

Lastly, if this is all too difficult, Hansgrohe will allow you to send your faucet in under the warranty. We will repair, test, and send it back to you. You can call us at 800-334-0455 for service in USA, or contact us through the web site www.hansgrohe-usa.com

Sep 02, 2011 | Hansgrohe 10129 Axor Starck Tall Single...

1 Answer

Insufficient hot water from Gledhill pulsacoil 2000


changing the shower head will not do anything.to do what you want,you would need more BTU's or a bigger unit to supply more water,someone may be hogging the water also.

Feb 25, 2009 | Hansgrohe Axor Hansgrohe Starck Shower...

Not finding what you are looking for?
Home Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

Donni Steen

Level 3 Expert

659 Answers

Tom Chichester

Level 3 Expert

34789 Answers

Brad Brown

Level 3 Expert

15691 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...