Question about Microsoft CompuRegister POS-1000 POS Computer Integrated Windows XP Pro (8090004101) PC Desktop

2 Answers

My programmes keep freezing, i cannot do anything on the computer

When i switch my computer on it takes ages to get into a programme, then it freezes not all the time but quite a lot of the time .

Posted by on

  • teatotal57 Nov 10, 2007

    Programmes on my computer keep


  • beewal Jan 03, 2008

    when i start my pc at first it hangs before it gives the log on screen, then i restart it and it doesn't send anything to the screen until you leave it switched off for a very long time and then switch on. but still it will hang a few minutes after you log on to the computer. it's a fujitsu siemens. i suspect the processor is over heating but then i have opened up the computer and put a fun for cooling it but still this hasn't help.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.

  • Expert
  • 188 Answers

MAY BE U HAVE=any virus on u r pc....check for it.use alatest version of anti virus...

if it dont help- then u can re install ur xp-

use win  xp-sp2 0perating system..

it support all latest m/b..


ur computer is ok..dont burry. u have just a miner software or a virus problem..


for anti virus. i suggest u avg 7.5 .. u can download it from net just for free.



best regards & best of luck..

Posted on Oct 12, 2007

    SHIVAJI YADAV Nov 06, 2007

    hey dude.....u did not make any repley....for u r problem solution ...

    hope it is solved.......
    Was this solution helpful? Show your Appreciation by rating it:
    best regards & best of luck..


  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

What is your computer's spec? and how long you use already?

Posted on Oct 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


I have a r1077 programmable scanner I'm trying to program it and I'm having trouble anything I key in keeps reading fr err in it every time. What should I do to fix this problem

Mar 23, 2012 | Radio Communications

1 Answer

140-S keeps freezing up

Hello my friend, your problem maybe due to application not installed right, get on your computer double click on tomtom home icon, hoping you have the maps copied to your computer, reset your device by inserting a clip or small object into the reset hole for around 15 seconds, then switch on your device and connect to your computer which then should ask if you want to connect, click yes and the programme should check for updates, in the device part of your programme highlight the map and click delete or remove, but only if you have the maps on the my computer part of the programme, Once removed, click on my computer in the programme tick the map you want to install and then click copy to device, this may take some time

Feb 07, 2010 | Tomtom ONE GPS Receiver

2 Answers

I have an HDD rerecorder that now sjips and freezes

HD takes more info and if you don't have a fast enough processor to handle this, that might be the problem.
The age of the recorder would tell you that. If it's 3 years old that might be it. Also how can the recorder record the HD signal unless it has the right tuner??

Dec 29, 2009 | Panasonic DMR-EX75EB-S DVD Recorder/HDD...

1 Answer

My toshiba l305-s5909 keeps freezing up. what is wrong

its common for computers to hug or freeze however you need to know when does it freeze. forestance when you open aparticular doc. or when its booting up or when you open a particular programme. please scan your computer and check your lastest updates for your antivirus.

Dec 04, 2009 | Computers & Internet

1 Answer

Screen freezes,cannot click on anything although I can still move cursor around.Will unfreeze in about 5 minutes.

It may be Processors Time is critical. Anything programm run and complete more resources.

1. Run TaskManager, amd see your process. Find this programm, and kill her process, or her tree process.
May be viruses, or mailware...
2. Your PC its very hot: Clean cooller by procesor.
3. HardDisk is freeze system. May be, make one's appearance "bad blocks".

Nov 08, 2009 | Toshiba Qosmio G35-AV650 Notebook

1 Answer

Computer keeps freezing everytime i try and open a programme

try doing a system restore on it. To tell You the truth I can't stand Norton because if You miss one of the updates it just doesn't seem to work. I had Norton a long time ago and got rid of it. All My family and friends that had it got rid of theirs also. Hope that helps You out. You can contact Me at if You have more questions.

May 25, 2009 | Packard Bell iMedia 6826 (P481000502) PC...

1 Answer

Program Freezes

There are several factors that can make your screen freze at an specific programme:
1)The program is not compatible with your operating sistem.
Solution: You can only reinstall your operating sistem OR another version of the operating sistem.

2)The programme is nit compatible with your computer and that is a serious problem. You can try to change your RAM Memory but I'm not sure if it works.

3)Some problems occured during the programme installation. Easy to fix: Reinstall the programme.

4)Maybe your computer doesn't have enough resources for that programme. You can add some extra RAM Memory. That may resolve your problems.

Dec 26, 2008 | Adobe Photoshop 7.0 for PC

2 Answers

Frozen hard drive

If you have a Thomson DT16300, here's a handy fix that address freeze ups, lack of reception and problems on your Hard Disk:

goto MENU screen
goto SETUP screen
goto HELP screen
At HELP screen, Enter 1397 - this accesses the engineer panel - you can reformat the HDD in this menu - you will lose all recorded programmes and planned recordings but it clears locked or corrupted files

OR - at the HELP screen, press the GREEN button

On the lower half of the screen youwill see 3 options:

Blue - Reformat HDD - clears all the memory/HDD - useful if you have a corrupted file - you will lose all recorded programmes though

Red - reset the whole box to factory settings - good if you have a locked box or reception problems or cannto scan for new channels. It goes back to when you bought the box, so you will have to input favourites and planned recordings again

Yellow - Software revert - allows you to go back to the previous software driver - you may lose new functions, but you can always restore it back again using the same feature

Feb 15, 2008 | Thomson DPL909VD System

Not finding what you are looking for?
Microsoft CompuRegister POS-1000 POS Computer Integrated Windows XP Pro (8090004101) PC Desktop Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides