Question about Ricoh Aficio 1035 Copier

3 Answers

Hi sir i have problem in ricoh 1035 machine problem sc 326 when i make counter its ok no sc code and by scaner make copy its give code sc 326 i change 2nd laser synchronization its same plz send me detail what i should do thanks

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mode sp 2-109-1 400 dpi initaliz

Posted on Feb 11, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 162 Answers

2nd laser synchronization error
The 2nd laser synchronization signal
cannot be detected by the main scan
synchronization detector board even if
the laser diodes are activated.
Clean to the crystals and mirrors inside the laser
Poor connection between the laser
synchronization detector board and
the LD unit.
Laser synchronization detector board
out of position
Laser synchronization detector board
defective
LD unit defective
if you is not technician you need call one to make this work.

Posted on Nov 15, 2009

LD unit, or BICU board....Do LD pitch adjustment -both 400 and 600dpi

Posted on May 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

326 SC what is the solution of this problem?


First of all check that the laser **** glass is still there, I've seen a couple of machines where the **** glass has been missing completely and it's been throwing up laser SCs. Remove the laser unit. Clean all the toner and dust out of it. Clean the synch sensor very carefully. If codes continue replace the LD unit. They tend to fail on these machines due to excess dusting

Sep 13, 2011 | Ricoh Aficio 1035 Copier

2 Answers

Sir my Ricoh 1045 machine have SC 326 problem, after taking a single copy the error code comes. please give a good solution to clear my problem. thanks


sc326 is a laser synchronization error. The problem is usually caused by the laser sync detection board or the LD unit.

Jun 02, 2010 | Ricoh Aficio 1035 Copier

1 Answer

Ricoh 1045 error code sc 672, 961


Controller to operation panel comucation error at start up.Check the controller stall,controller board installed correctly operation panel connectors.Enter im the service menu ,press the SP mode,open the front door,turn off the copier,unplugged the machine.Wait 10 seconds,plugged on the machine,close the front door,turn ON the copier and make a copy.

Dec 28, 2009 | Ricoh Aficio 1035 Copier

2 Answers

Ricoh aficio 1035 error code SC121


sc 121 is related to optics section of your machine.check the lamp is glowing .if so check the connection from optics to main board.

Jun 15, 2009 | Ricoh Aficio 1035 Copier

3 Answers

Ricoh 1035 laser problem


sometimes the plastic of the laser is turned by the heat proves to relax and to fit the screw that holds the laser unit that is of the side of the drum while it raises a millimeter with a screwdriver, this sometimes works.
Verifies that the glasses and mirrors well be positioned correctly.
Other

Poor connection between the laser
synchronization detector board and
the LD unit.
Laser synchronization detector board
out of position
Laser synchronization detector board
defective
LD unit defective

May 07, 2009 | Ricoh Aficio 1035 Copier

3 Answers

Ricoh Aficio 1035 from Networked Unit to Stand Alone


There is a service code to disable the key counter. I'll have to look it up. If you are not connected to a network, you can still use the copier without being hooked up to one. That is just a warning message. You can clear it out by pressing user tools counter. Select interface and set all ip addresses to 0.0.0.0.

Jan 29, 2009 | Ricoh Aficio 1035 Copier

1 Answer

What does troubleshooting code 326 of ricoh copier 1045 means?


2nd laser synchronization error. F gate 1 error. This is an optics issue. Try unplugging the machine and plugging it back it to see if the error goes away.

Nov 13, 2008 | Ricoh Aficio 1035 Copier

3 Answers

Sc 322, sc 326 codes


Never heard of this happening to five machines before.  Check the connections in the laser unit.

Oct 25, 2008 | Ricoh Aficio 1035 Copier

Not finding what you are looking for?
Ricoh Aficio 1035 Copier Logo

Related Topics:

382 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...