Question about Sharp MX-3501N All-In-One Printer

Open Question

Data light flashing - won't print from network

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

support741
  • 337 Answers

SOURCE: Our Data light keeps flashing and the printer won't print. How do we get the data light to stop flashing so we can use our copier again with our computers?

Sounds like a bad print job stuck in a print spooler.
Turn off copier. Go around to all computers that print to it and open the print queue. delete all print jobs. reboot each PC. Power up copier and see if it clears

Posted on Jan 30, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blue center light flashing, won't copy from any computer


So Sandra, it will make copies but does not print from any computer. Have you installed print drivers on the network? Can you ping the copier?, any resent changes to the network? Check the network connection at the copier, green light flashing/orange lights flashing? Can you print a doc. or a pdf., or email or web page try different programs? Check the network setting at the copier, go to admin setting default pw 12345678.

May 12, 2015 | Konica Minolta bizhub C250 All-In-One...

1 Answer

Linux driver


Printing via USB:

  1. Get the samsungmfp- repository.
  2. Install samsungmfp-driver (samsungmfp-data will be installed automatically as a dependency).
  3. Go to Administration > Printing and delete previously created printer device(s).
  4. Connect printer via USB.
  5. Once new device has been created, go to Properties and change the Make and Model to Samsung SCX 4521F All-In-One.

For wireless printing:

  1. Connect to your printer. To get the IP address of your printer:
    1. Hold down on the printer power button for about 5 seconds; light will start to flash and when it begins to flash even faster let it go. This will print out the Configuration and Network Report.
    2. Locate the IP address on the Network Report and type it into your web browser.
  2. Once you are in the SyncThru Web Service, go to Network Settings and than to Wireless.
  3. Configure your Wireless Setting through the Wizard and follow the setup process (note that if your SSID contains space your network will not be displayed).
  4. Once the printer is connected to your LAN go to printer setting (Administration > Printing; Properties).
  5. Click the Change button for the Device URI.
  6. Go to Network Printer > Find Network Printer and type in the IP address of your printer.
  7. Apply the settings when it find the PASSTHRU. Device URI should looks something like this: lpd://[IP Address]/PASSTHRU.

Nov 04, 2013 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

Our Data light keeps flashing and the printer won't print. How do we get the data light to stop flashing so we can use our copier again with our computers?


Sounds like a bad print job stuck in a print spooler.
Turn off copier. Go around to all computers that print to it and open the print queue. delete all print jobs. reboot each PC. Power up copier and see if it clears

Jan 15, 2013 | Sharp Mx-M450nb Digital Copier

1 Answer

The slot where the usb cable fits into the back of the printer has 4 pins in it, one of the pins was bent and has been straightened but the print will not print. The green light flashes slowly indicating...


Well if you were using printing through usb? and now is damaged you have another options, print through network cable, or through parallel cable, and no if the usb port is damaged will not effect at all the network card or anything else.

Thanks for using Fixya

Oct 08, 2009 | Kyocera FS-920 Laser Printer

2 Answers

Data light flashes , documents won't print.


this is not a network problem.because machine is receiving documents thats why light is blinking. check the paper in the tray whether they are of correct size, change the paper size from computer, or call your tech service rep it may be due to usb cable or faulty network cable, or it may be the problem of main communication board of photocopier machine.

Feb 10, 2009 | Konica Minolta bizhub C351 All-In-One...

2 Answers

Printing


network cable,Thanks

Feb 23, 2008 | HP LaserJet 2430dtn Printer

Not finding what you are looking for?
Sharp MX-3501N All-In-One Printer Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

255 Answers

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...