Question about Vanguard 15-45 x 60 Zoom Tabletop Spotting Scope Kit

Open Question

I have no motion in my joint of elbow

Sir i got three rounds of AK47right on my elbow joint now i have no motion in it.  five months ago.sir if you please help me.write me back.bye

Posted by on

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

How can I purchase a spotting scope manual for a Redhead Pursuit spotting scope?

Call your nearest Bass Pro shop. They may be able to arrange for you to get a manual.

Jul 20, 2014 | Redhead Pursuit (18-36x50)

1 Answer

Contact winchester

Since it is only two that split, it is not a concern. The cause is most likely bad brass.

Mar 09, 2014 | Spotting Scopes

1 Answer

I had my Crosman 357 for about 15 years or so. I never used it at all until a couple weeks ago and it worked great for a few days and I liked it so much I bought more "clips", ammo and CO2 for it and then...

Well I recently bought a crosman like a month ago, I worked great, I also use CO2, then i started using it again, and all of a sudden all of the CO2 started seeping out of the barrel and CO2 area, cartridge after cartridge, so i said screw it and took it apart, and found the area that deals with the CO2 and tightened everything up. I couldn't put it back together, so i looked for the schematics and finally got it back together, then i tested it out and it works fine now. Good luck.

Oct 25, 2010 | Crosman Spotting Scopes

1 Answer

I have a Winchester 7600 from the late 60's that I have never fired. I have just stored it here at home and never really had a use for it. I do not even know what type of ammo it takes. Can anyone tell me?

I think you will find that you have a Remington 7600 pump action rifle chambered in a Winchester calibre round. There may be something inscribed on the barrel with Winchester on it. The numbers with the word Winchester EG: .308 will denote the calibre. Just like a .38 revolver will have .38S&W on it regardless who manufactures it. The name S&W indicates the original patentee of the round. So your Remington 7600 is chambered for a Winchester patent round. The number with it such as 308 or 243 will tell you what ammo it takes.

Aug 01, 2009 | Zeiss CONQUEST 4.5-14X44 AO MATTE Z PLEX

1 Answer

Which knob for elevation/vertical adjustment?

usually side. best thing to do is go to an indoor range and sight it in. Just know the ballistic for the round/weapon you are shooting. ie. An M-16 has the same trajectory at 36 yds as 300, that way you can sight in at 36yds.

Dec 13, 2008 | Nikon ProStaff Rifle Scopes

1 Answer

Cross hairs are tilted to right while scope is straight

Without seeing the rifle, my guess would be that either the rings were not tight enough or the lens came loose from the shot. It is rare depending on the quality of the scope. If the lens itself moved, it will not be waterproof or fog proof because the seal on the lens is not tight. If its under warranty then it should be replaced, if not then be care full not to get it too wet. If you had a suction cup, you could try to reposition it straight again.

Nov 28, 2008 | Tasco World Class 38154550 (15-45x50 mm)

3 Answers

How do u reset a rifle scope

Hi type into Google, Zeroing a Telescopic Rifle site, Shooters have there own ways of doing it but you will find what is best for you depending on what type of rifle you will be using. If you are fitting it to a Air Rifle. You could Type in Zeroing telescopic site for Air Rifles.
Hope this helps

Oct 07, 2008 | Bushnell Sportsman 4x32 Riflescope (4x32...

2 Answers

Crosman 2104 Air Rifle

i had the same problem with my 2100. you would have to take it apart. the barrel is held in place with a small allen bolt. you would remove the bolt and slap some locktight on it and retighten.  that should solve your problem but i would think twice before taking it apart cuz its kind of tricky getting it back together and I would replace any seals while you have it apart. good luck

Jul 25, 2008 | Crosman (4032)

3 Answers

New leupold scope

You may need to purchase a base with a built in taper to help zero your scope. Look for "20 MOA scope base" if interested in purchasing. Go Here:

for a discussion and info that may help.

Dec 01, 2007 | Spotting Scopes

Not finding what you are looking for?
Spotting Scopes Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vanguard Spotting Scopes Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Brad Brown

Level 3 Expert

13369 Answers


Level 2 Expert

223 Answers

Are you a Vanguard Spotting Scope Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides