Question about Dishwashers

1 Answer

DD60DCW6 dishwasher i cant get out of area its in i hav draws out but rest wont budge

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 171 Answers

Dishwashers are usually bolted to the underside of the counter it is under. Open the front of the dishwasher and look up under the counter for two screws ... unscrew those and the dishwasher should slide right out. Once it is out a little ways you will need to siconect the water line from the unit. Be sure and turn the water off before unhooking it or you will flood the room. Usually the hose goes under the sink area and the water can be turned off there.
You will also need to turn off the power at the house breaker box so that you can disconnect the electric wire from the unit. If you are not familiar with household electric, you should call a professional for this.

Once the electric is disconected the unit should come the rest of the way out.

Posted on Nov 26, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
caroldon
  • 17130 Answers

SOURCE: touch sensitive buttons on my

Possible that the touch panel is faulty or that the prograam controller unit is faulty. remove power check if there is moisture , if so dry the panel and check.
If not there are errors on the panel which might need further probe to remove and check , if not try to get a board to confirm after which the cost of a new board must be estimated.

Posted on Aug 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood problems


Two people, have one pull and hold the hood release and second person firm fist pound the hood near the latch area.

Jan 10, 2014 | 2001 Ford Mustang

2 Answers

Touch sensitive buttons on my F&P dishdrawer dishwasher Model dd60dcw6 have stopped working. They are stuck on one wash.


Hi,
If water is in the bubble, you will not be able to change cycle. Open drawer, hit power, close drawer, reopen drawer and try again. If water is in bubble your your finger is wet, the board cannot sense your finger. This button is not s button, its a sensor, just slid your finger across, its designed to detect your current in your body, not the touch of a finger.
Good Luck

Aug 22, 2011 | Fisher and Paykel DD60DCW6 Dishwasher

1 Answer

I have a single DS603H dishwasher. When I press start it just beeps a couple of times. Nothing happens, it does not start or anything.


this means the machine still thinks the draw is open so ofcoarse will not start, the sensor that detects the draw being shut is on the left hand side of the unit when u pull the draw out u will see 2 little clear squares on the side up the top near the control panel make sure they are clean aswell as the recieving end on the cabinet is clean as they r simple infrared sensors so if the beam of light is obstructed it wont think it is shut as the beam of light comes out of the control board and bounces off a light refracting prism and then sends it back to the board so if the beam cant return it wont start if they are all clean then you r looking at replacing the main control board as the sensor is contained within it

May 27, 2011 | Fisher and Paykel 24 in. DS-603 Built-in...

1 Answer

Dishdrawer DD601 v2 Error F1 on the bottom draw.


Hi,
Below is the link to the service manual
http://www.scribd.com/doc/6462163/DD601V2-Manual
This will be able to explain the problems better that I can in the tiny space I get to write in.
Mat
Please rate me

Mar 15, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Hot point dishwasher


your always gone hav a small oamount of water in machine after cycle is complete never can totally remove all water. not to worry though before running next cyclye the dishwasher first redrains and then fills

Mar 02, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Brad Brown

Level 3 Expert

16147 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...