Question about Qca Spas Dream Series Dream Master Hot Tub with Flex Cover

2 Answers

I am getting a Pr code and the tub is not coming on at all

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Qca Spas Master
  • 1,631 Answers

Very simple...
Pr is only a brief "timeout" upon powering up the hot tub control system. Pr means - "Priming" Mode. That's it!
it will be in this mode for about 6 minutes.
Then system will revert to normal operation mode.
Good luck.

Posted on Apr 11, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 12,223 Answers

Follow this steps and fix it. God bless you
If the unit won't start, make sure power is on at the electrical outletor the electrical panel Then test the pump and the motor. Check for and repair broken wires or loose or corroded terminals. If necessary, have the pump switch control tested and serviced professionally.
If the jets do not work, clear a blocked water intake of hair and other particles (see below) or replace a broken jet (see below).
If the water in your spa or hot tub is too hot or too cold, check to see if the high-limit reset switch has been tripped and, if needed, reset it. Adjust the thermostat setting and have the thermostat serviced if the problem persists. If necessary, test and replace a faulty heating elements
I am getting a Pr code and the tub is not coming o - 125a10b3-4403-4cc7-8741-9137c999473e.jpg

Posted on Nov 26, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hot tub stuck in PR mode.


Are the pumps primed, the code represents that the pumps are being primed and should only stay on 2 - 5 minutes. If the pumps are not primed then you may have an air lock or dirty filters. You need to release the air or clean or replace the filters and your pumps will prime.

Mar 27, 2014 | Pool & Spa

2 Answers

Great lakes hot tub


Hi, I am not a hot tub expert and I don't know what PR status is or what PL on the display means . However I did a quick search for you and have a web address that might help you find a solution.
http://www.spacare.com/troubleshootingguideforspaandhottubs.aspx
Hope it helps you
Regards
Steve

Mar 27, 2014 | Garden

2 Answers

My hot tub is not coming on at all and is giving me a Pr code. What can I do?


please follow this steps and fix it. God bless you
If the unit won't start, make sure power is on at the electrical panel or the electrical panel . Then test the pump and the motor. Check for and repair broken wires or loose or corroded terminals. If necessary, have the pump switch control tested and serviced professionally.
If the jets do not work, clear a blocked water intake of hair and other particles (see below) or replace a broken jet (see below).
If the water in your spa or hot tub is too hot or too cold, check to see if the high-limit reset switch has been tripped and, if needed, reset it. Adjust the thermostat setting and have the thermostat serviced if the problem persists. If necessary, test and replace a faulty heating elements
9d4832d5-8a31-4a17-99b3-af20b93aa530.jpg

Nov 26, 2013 | Qca Spas Dream Series Dream Master Hot Tub...

1 Answer

My Dream Maker Big Ez is displaying error code Pr on display when the display is on at all. Worked fine before. This just started overnight


pr is for primeing the pump hit the pump and see if it goes off if not hit the temp botton up or down and see if thjat works for you

Nov 08, 2013 | Dream Maker Spas Dream Maker Ez Spa Hot...

1 Answer

Display code p=


Make sure the spa is not on sleep mode "SLP" or economy mode "ECO". Without knowing what type of spa you have it's hard to diagnose but it's possible your pressure sensor or high limit sensor it temporarily out of balance. If that's the case, it will resolve itself. If the problem persists you have a faulty faulty pressure switch or sensor.

May 05, 2013 | Pool & Spa

2 Answers

;turn coleman hottub on - flashes "pr" for a few min. then it shuts off


Hi,
If your Coleman has Balboa electronics 'PR' is to notify you that it is in priming mode.
It could also be your pressure switch. On most tubs the pressure is mounted on the heater. If this switch is not reading correctly it could shut the spa down to prevent heater overheating.

Sep 18, 2012 | Pool & Spa

Not finding what you are looking for?
Qca Spas Dream Series Dream Master Hot Tub with Flex Cover Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Qca Spas Pool & Spa Experts

Ian Kime
Ian Kime

Level 2 Expert

77 Answers

byrdhaus188

Level 1 Expert

18 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Qca Spas Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...