Question about Endless Summer 2009 Open Flame Patio Heater

1 Answer

Pilot light will not lite

Could this be cleaned if not i want to replace with new parts is it easy to do and who do i call for new parts--Thanks Help

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I fixed the pilot light by taking off the cover to expose the gas lines going from the knob to the pilot light fitting --I shut of the gas then disconnected the gas lines blew air in the lines to clean out any matter that might have been blocking the gas from getting to the pilot light re connected the lines and fired up my heater it is working great ---hope this can help some one with the same problem

Posted on May 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a mini max 200m pilot is lite but it won't lite pressure value is replaced all connection are cleaned please help


make sure it has enough flow and also voltage at pilot generator (red and white wires from pilot). should be around 500millivolts for the gas valve to open.

Aug 20, 2013 | Jandy Lite 2 Natural Gas Pilot Light...

3 Answers

Pilot lite won't stay lit


Thermostat flame sensor. Do you see a little rod next to the pilot? That is what tells the main gas valve that the pilot is lit and it is safe to give gas. Easy swap, and you can usually just pick up a generic one.

Apr 14, 2013 | Heating & Cooling

1 Answer

It runs out of fuel


sound like pilot lite is not getting thermocouple hot.
check that pilot lite flame is extending out to and touching thermocouple. If not, clean out pilot lite orface and pilot lite gas feed pipe all the way back to the main gas valve if necessary.
If pilot lite flame is touching thermocouple, then replace thermocouple

Jan 22, 2013 | Mr. Heater Big Buddy Heater

1 Answer

Kent Portable LPG Cabinet Gas Heater wont lite or once it is lite it wont stay on, where can I take it to be service, obvious lookling at cost factor help needed....


Most independent heater dealers have service departments, that can handle the service and repair of your heater. You may not have to take it to them.

From what you described, it sounds like either the Thermocouple has failed or that the pilot and the ODS Sensor (Which is part of the pilot, if it's a vent-free or flue-less heater) are clogged and need to be cleaned. Especially, if the pilot flame is curling upward and away from the thermocouple, when you try to light it.

If you want to attempt to clean it yourself, all you need is a can of compressed air with a straw nozzle (like you clean your computer with) to accomplish it. It does require some dismantling of the heater cabinet, to access the pilot assembly. If you decide to tackle it yourself, I have included a link to a demonstration of "How to Clean a Burner & Pilot Assembly".

http://www.desatech.com/techDocs/Cleaning%20Demonstrations.pdf

Hope this helped you. Please let me know. Thanks.

Jun 24, 2011 | Heating & Cooling

2 Answers

Hi, i have a big buddy heater. the pilot lite doesn't extend out to heat the thermocoupler. i have taken it apart & cleaned & blew out the pilot assy tubes. i can hold a liter to the coupler and i...


It's easier to replace the entire Pilot Assembly. The Part Number is 78422 and you can order it direct from Mr. Heater. For parts call 800-251-0001. It should run about $30.00.

Hope this helps you. Please let me know.

Apr 08, 2011 | Mr. Heater Big Buddy Heater

1 Answer

Intermittant flame, ignitor function is good, all other functions are as designed,timer ,tumble etc.


Hi

The pilot light flame would sometimes get very small and keep going out. This was usually because the pilot orifice was getting dirty and was partly plugged. The pilot orifice must be cleaned out when the flame becomes too small to light the main burner. You can blow air through the pilot assembly to help clean it out, don't use something metal in the pilot orifice hole or you risk enlarging the pilot gas feed hole and the pilot light may be too BIG. If your pilot flame keeps "going out", chances are you will need to replace the pilot latch do make sure the vent hood flapper is closing ok and no outside air blowing in is effecting the pilot flame.
This is a thermocouple that sensed the heat from the pilot flame and kept a small amount of gas flowing to allow the pilot light to stay lit. If you followed the instructions ( usually found inside the small access door on the front bottom ) on how to re-lite your pilot when it goes out and the flame will not stay on, replace the pilot latch assembly.

Please accept the solution and revert for further assistance.

Thanks
Rylee

Jul 07, 2009 | Whirlpool GGQ8831L Gas Dryer

1 Answer

Pilot light stays on but burner doesnt ignite


usually the small opening on the burner that 'points' to the pilot light will get clogged with cleaning soap or spills. Look carefully (the burner may be very easy to remove for inspection. There should be a small hole on the side pointing toward the location of the pilot light. It will be lower down than the main burner openings. Clean it out with a wooden toothpick.

Jun 19, 2009 | Lite On Laars Lite 2 Heaters: 250,000BTU...

2 Answers

Laars lite 2 pool heater burner not lite


If the pilot flame is not strong enough, it will not tell the gas valve to open, or if the gas valve is not getting the signal to open, it won't. Check all wire connections at the thermostat and gas valve. Check ground wires. Clean the pilot light and flame rod.

Aug 31, 2008 | Lite On Laars Lite 2 Heaters: 250,000BTU...

1 Answer

Rinnai wall heater won't lite.


You may need to take the pilot assembly apart and clean the pilot orifice. If the pilot does not stay lite you may need a new thermocouple. Good Luck.

Mar 29, 2008 | Heating & Cooling

Not finding what you are looking for?
Endless Summer 2009 Open Flame Patio Heater Logo

Related Topics:

374 people viewed this question

Ask a Question

Usually answered in minutes!

Top Endless Summer Heating & Cooling Experts

Paul Carew

Level 3 Expert

3238 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

yadayada
yadayada

Level 3 Expert

78257 Answers

Are you an Endless Summer Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...