Error code te - LG WM2301H Washer

A Samsung Washing Machine displays a tE error code when a Thermistor Error has been detected by the internal electronic diagnostics. You can find more info here
https://appliancerepairinfo.com/samsung-washing-machine-te-code/

if you replaced the thermister
and tE comes up

then its the heating element has failed
and or its thermal safety fuse set up perhaps failed also

A tE error code on the display of the washer indicates a heating error, usually caused by a faulty thermistor.

1. Unplug the washer from the power outlet for 10 seconds.
2. Plug the washer back in and press the POWER button and then the SPIN SPEED button until No Spin is selected. Press the START/PAUSE button.
3. Once the washer has drained, restart the wash cycle.
4. If the tE error code appears again, close the water taps and unplug the washer. The washer will require repair service.

Need a model number.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

te error code is (touchpad error). you have to replace the touchpad assy. the board and overlay.

The TE error code is a Thermistor error. Replace the thermistor and you should be good to go.

How to read ECU fault codes. 1KZ-TE & D4Dwww.pradopoint.com/showthread.php?...to...fault-codes.-1KZ-TE...Cached

I had the tE or te error (an L with a line through it) error on my LG front loader and my local appliance store sold me the thermistor for $7. I layed the unit on its side and accessed the thermistor through the bottom. It plugs into the bottom of the tank. Blue and white wires. No screws and 1 tie-wrap. (Leave the rubber grommet in - just pull the thermistor rod out.) Works like a champ!

TE Error Code = Heating Error - Thermistor failure


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

TE Error Code = Heating Error - Thermistor failure


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question