Question about Gateway NE56R41u Dual Core B960 4GB 500GB 15.6 DVDRW HDMI WiFi Wi

1 Answer

How to clear bios password on a ne56r41u

Need to enter bios has password?

Posted by on

  • mike springer
    mike springer Nov 26, 2013

    remove memory cover,remove memory locate 2 points of solder

    use flat screwdriver to short these "while shorting turn on light will come on then go out done"

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,511 Answers

Try to simply pop out the battery that maintains the BIOs memory and restart the computer without it. You will have to shut down, replace the cell and reboot setting parameters again for the BIOs (Date and Time etc.)

Posted on Dec 22, 2013

  • Nosemaj Revolg
    Nosemaj Revolg Oct 24, 2014

    Dayton you are a master, thank you!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove bios password


On the computer motherboard locate the BIOS clear or password jumper or dip switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD or PWD. To clear, remove the jumper from the two pins currently covers the replace it over the other two.


How to clear an unknown BIOS or CMOS password

How to Reset BIOS Password

Lost BIOS password Resetting the BIOS

Dec 18, 2015 | Computers & Internet

1 Answer

How can I access BIOS on My Acer NE56R41u with a Security lock on the hard Drive,


You can access the BIOS with F2 as the splash screen starts. You cannot however use the had drive again without the correct password.

Mar 14, 2014 | Toshiba Satellite A105 Notebook

2 Answers

Reset bios password


please give me lenovo sl400 bios reset password thanks

Oct 12, 2010 | Matsonic MS9158EP (DSMTSMS9158EP)...

2 Answers

I have an acer laptop 2920 i lost the password which has locked


There is only one way to clear cmos (BIOS) passwords and I'll show you the procedure.....

Steps for Clearing BIOS Password Check

If users set BIOS Password ( Supervisor Password and/or User Password ) for a security reason, BIOS will
ask the password during systems POST or when systems enter to BIOS Setup menu. However, once it is
necessary to bypass the password check, users need to short the HW Gap to clear the password by the
following steps:

q Power Off a system, and remove HDD, AC and Battery from the machine.

q Open the back cover of the machine, and find out the HW Gap on M/B as picture.

q Use an electric conductivity tool to short the two points of the HW Gap.

q Plug in AC, keep the short condition on the HW Gap, and press Power Button to power on the
system till BIOS POST finish. Then remove the tool from the HW Gap.

q Restart system. Press F2 key to enter BIOS Setup menu.

q If there is no Password request, BIOS Password is cleared. Otherwise, please follow the steps and
try again.

NOTE: The steps are only for clearing BIOS Password ( Supervisor Password and User Password ).

Below is the picture showing the location of the jumper next to the memory module slots. This is the jumper connections that have to be "shorted".


8db5855.jpg

Jan 28, 2010 | Acer Aspire 4720 Notebook

3 Answers

Could you please guide me how to remove bois possword for travel mate5730g


Steps for Clearing BIOS Password Check
If users set BIOS Password (Supervisor Password and/or User Password) for a security reason, BIOS will ask
the password during systems POST or when systems enter to BIOS Setup menu. However, once it is
necessary to bypass the password check, users need to short the HW Gap to clear the password by the
following steps:

• Power Off a system, and remove HDD, AC and Battery from the machine.

• Open the back cover of the machine, and find out the HW Gap on M/B as picture.

• Use an electric conductivity tool to short the two points of the HW Gap.

• Plug in AC, keep the short condition on the HW Gap, and press Power Button to power on the
system till BIOS POST finish. Then remove the tool from the HW Gap.

• Restart system. Press F2 key to enter BIOS Setup menu.

• If there is no Password request, BIOS Password is cleared. Otherwise, please follow the steps and
try again.

NOTE: The steps are only for clearing BIOS Password (Supervisor Password and User Password).

Check below for the picture of the HW Password reser gap. The gap that needs to be "shorted" is G77.


80cc7f4.jpg

Jan 27, 2010 | Acer TravelMate 5730-6204 Notebook

1 Answer

My acer aspire one crashed and i need help


Below are the steps for the resetting of the password. Below the steps is the link for the service manual. On page 113 is the picture of the jumper pads that need to be "shorted" to reset the cmos.

Steps for Clearing BIOS Password Check
If users set BIOS Password (Supervisor Password and/or User Password) for a security reason, BIOS will ask
the password during systems POST or when systems enter to BIOS Setup menu. However, once it is
necessary to bypass the password check, users need to short the HW Gap to clear the password by the
following steps:

• Power Off a system, and remove HDD, AC and Battery from the machine.

• Open the back cover of the machine, and find out the HW Gap on M/B as picture.

• Use an electric conductivity tool to short the two points of the HW Gap.

• Plug in AC, keep the short condition on the HW Gap, and press Power Button to power on the
system till BIOS POST finish. Then remove the tool from the HW Gap.

• Restart system. Press F2 key to enter BIOS Setup menu.

• If there is no Password request, BIOS Password is cleared. Otherwise, please follow the steps and
try again.

NOTE: The steps are only for clearing BIOS Password (Supervisor Password and User Password).

http://tim.id.au/laptops/acer/aspire%20one.pdf

Dec 26, 2009 | Acer Aspire One PC Notebook

2 Answers

Bios reset


As another option you could try resetting the jumper. Some boards save the password regardless unless the reset the BIOS by using the resetting jumper. Refer to the motherboard's manual for further information on how to do this.

Oct 10, 2006 | Acer (ACERMOTHERBOARD)

Not finding what you are looking for?
Gateway NE56R41u Dual Core B960 4GB 500GB 15.6 DVDRW HDMI WiFi Wi Logo

900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gateway Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...