Question about Canon PIXMA Office Equipment & Supplies

1 Answer

Canon pixma will not switch on

I have tried changing the plug to a different socket and checking the wires at the back. But when I push the on button absolutely nothing happens, what could be wrong?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Burnt fuse or double check that there is power at the socket and at the end of the cord when un-plugged... If there is power try turning on and make sure all doors are closed.

Posted on Nov 26, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 71 Answers

SOURCE: Canon Pixma MP500

This is the start of the fun with vista. I gives the error message "known compatibility issues" with any none MS software. It does give you the option to install anyway. Do this before plugging in the printer or vista will install it's own driver and it wont work.
the software will tell you when it is safe to plug in the printer.

you can get the vista driver @:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=11995

Posted on Jan 05, 2008

  • 3 Answers

SOURCE: Canon PIXMA MP780 - suddenly no power

Mine has the same problem. The only difference is it threw a few errors first (weird stuff like improper cartridge, etc.) and I had to unplug/replug in the power to get it to work. Now, nothing at all. Dead. I really liked this unit too! Always used brand new Canon ink. Any ideas?

Posted on Jun 10, 2008

ihavsolution
  • 152 Answers

SOURCE: Canon PIXMA1500 prints blank pages

you need to change the print head ...

Posted on Jul 15, 2009

  • 1 Answer

SOURCE: My Canon printer (Pixma MP530) will not turn on.

Try unplugging it for five minutes. Then plug it back in.

Posted on Dec 03, 2009

  • 84 Answers

SOURCE: My Canon Pixma MP610 won't power up. I've

You've eliminated all other options, so obviously your printer is defective.

Call canon if it is under warranty, otherwise you will have to replace it.

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What should I do to fix my canon mg7120 printer when I get the message "printer not responding"?


check that the printer is "on", and that it's actually connected. Change USB cable for another one, plug into a different USB socket on computer. If no help, try on another computer.

Sep 02, 2014 | Canon PIXMA MG7120 Wireless Color...

1 Answer

How to solve 5100 error of canon pixma ip1880 series printer


Follow this procedure:

1. Enter Service Mode: Hold Power button and plug a power cord, then push Resume button twice and release all buttons.
2. Free Download from Internet: GeneralTools for Canon Pixma IP1880
3. Starting GeneralTools
4. CHANGE USB PORT change into PORT of your printer
5. click lock release
6. click ip1800
7. click device id
8. clear waste ink counter by clicking MAIN & PLATEN
9. Check EEPROM Box
10. Click EEPROM Dump
Power off printer and all done. Work again!

Jan 11, 2011 | Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

How do I re set the cartridges after a refill on my Canon PIXMA MX320?


Hi there

Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset
Ink level notification:

1. Push “resume” for 5 seconds for canon For MPXXX you must enter to service
Mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0′
5. Push + change display from “0′ to “1′
6. Push colour button 2 times
7. Push Power switch again, Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again


Enter to service mode for canon MPXXX

With the printer powered off but connected to a power source, press the Power
Button while pressing and holding the Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times while pressing and
Holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of
Order), the printer will move into a service mode. (Waiting for menu selection)

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Apr 30, 2010 | Canon PIXMA MX310 All-In-One Printer

2 Answers

How to reset error e4


The reset method work for canon printers that using PG-40 and CL-41 cartridge. After doing this reset method canon printer will not display low ink notification anymore and will not show error code “E4′ or “E5′.
Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset ink level notification:
  1. Push “resume” for 5 seconds for canon IPXXXX. For canon MPXXX you must enter to service mode.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again
Enter to service mode for canon MPXXX
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)


Apr 15, 2010 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

My printer reset button keeps flashing. i have switched it on and off and still does not work 1p3500


Hi there

Here How to Disabling Low Ink Level Notification for Canon IP and MP, the method to reset
Ink level notification:

1. Push “resume” for 5 seconds for canon For MPXXX you must enter to service
Mode.
2. Push Power switch then remove power cord.
3. Insert plug power cord while pressing “power switch” at the same time.
4. Push Start/reset by step 2 continue Wait display shown “0′
5. Push + change display from “0′ to “1′
6. Push colour button 2 times
7. Push Power switch again, Printer will print 1 page
8. Open cover
9. Unplug power cord
10. Take out ink cartridge #40 and #41
11. Insert plug again
12. Push power switch
13. Open cover (scan cover)
14. Insert ink cartridge #40 and #41 again


Enter to service mode for canon MPXXX

With the printer powered off but connected to a power source, press the Power
Button while pressing and holding the Stop/ Reset button.
When the Power is lit, press the Stop/Reset button two times while pressing and
Holding the Power button.
When releasing the Power button and the Stop / Reset button (regardless of
Order), the printer will move into a service mode. (Waiting for menu selection)

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 20, 2010 | Canon PIXMA iP3500 Printer

1 Answer

Cant print using Canon Pixma MX300


Hi


1. Disconnect the power cable
2. Connect it while holding down the power button
3. With the power button still down, press twice the "Cancel/Stop" red button
4. Release the power button
5. The prints turns into a kind of factory mode...(wait for about 10 seconds, utile it says "Idle")
6. Press the ">" (next to the "OK" button) once.” Shipping Mode 3"
7. Press the "OK" button.
8. Press "OK" again for "Without cleaning"
9. A test page will print.
10. Open the cover, like you are about to change the cartridges.
11. Disconnect the power cable again.
12. Take out both cartridges.
13. Close the cover.
14. Connect the power cable once again.
15. Turn the printer on.
16. Now just put the cartridges back...

Or try this

Here the Solution to reset the ink level for Canon Pixma MX300 follow this steps to reset the ink level in your canon MX300.
  1. Switch off the Canon MX300 and disconnect the power cable.
  2. While press and hold the power button, Connect the power cable to electric socket.
  3. While pressing the power button, press the “Cancel/Stop” button (red button).
  4. Now release the power button and the printer turns into a kind of factory mode. Wait for 10 seconds until it says “idle”.
  5. Press “>” (next button) once “Shipping Mode 3′ then Press the “OK” button. Press “OK” again for “without cleaning”.
  6. A test page will print.
  7. Open the cover, like you are about to change the cartridges.
  8. Disconnect the power cable again without switch off the printer.
  9. Take out the both cartridges.
  10. Close the cover.
  11. Connect the power cable and turn on the printer.
  12. Now just put the cartridges back and the ink level in the canon Pixma MX300 have full again.


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Sep 08, 2009 | Canon PIXMA MX300 All-in-One Printer

1 Answer

Canon ip1800 printer not working


Hi,

when the yellow led flashes is never a good signal... you should check the manual's printer to find out the error code meaning "4 yellow flashes and 1 green)
Usally it's the waste tank that is full, in this case you need to:

  1. Push “resume” for 5 seconds for canon IPXXXX.
  2. Push Power switch then remove power cord.
  3. Insert plug power cord while pressing “power switch” at the same time.
  4. Push Start/reset by step 2 continue Wait display shown “0′
  5. Push + change display from “0′ to “1′
  6. Push color button 2 times
  7. Push Power switch again , Printer will print 1 page
  8. Open cover
  9. Unplug power cord
  10. Take out ink cartridge #40 and #41
  11. Insert plug again
  12. Push power switch
  13. Open cover (scan cover)
  14. Insert ink cartridge #40 and #41 again

Jul 18, 2009 | Canon PIXMA iP1800 InkJet Photo Printer

1 Answer

My Canon PIXMA iP4000 will not turn on. Printer was working great until i went to turn it on and there was no power.


Dear Mmally1323,

You said "My Canon PIXMA iP4000 will not turn on. Printer was working great until i went to turn it on and there was no power."

First off make sure that your powre cable is securely plugged into your printer and into the wall. If the printer still doesnt turn on then try to plug it into a different wall socket, as the socket could be 'dead'.


Jul 02, 2009 | Canon PIXMA iP4000 InkJet Photo Printer

2 Answers

The waste ink absorber for canon i9900. please help


you can change ink absorber. if not ,you can change this boxe,s absorber sponge in same size. it workes is absorber wastage ink of printer. thank (nepal)

Jun 28, 2009 | Canon Pixma iP6000D InkJet Photo Printer

1 Answer

It will not turn


Try leaving it unplugged for 1 hour plug it back into a different wall outlet and the power supply should then come back to life. If not take it to a canon service center.

Nov 09, 2008 | Canon PIXMA MP830 All-In-One InkJet...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1921 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...