Question about Dewalt Drills
Schematic wiring for a dewalt dwd 210g drill series 948351
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Dewalt cordless drill
You have burned out the drill motor, it is shorted, the battery smoked due to a direct short, one thing I don't understand why the thermal limiter didn't trip in battery pack, I would contact manufacturer and try to get hem to buy you a new drill.
Posted on Aug 29, 2008
some of the dewalt drill switches have a one way trap (like) for the wire. you push the wire in and the harder you pull it gets tight on its self. your wires go in the bottom of the trigger look right on top of each wire there is a small **** (no bigger then 3/16) for a flat head screw drive. In the **** you will see a small lever, it needs to be turned at the same time pull. It will help to have a friend.
Posted on May 27, 2009
If you find that the end of the screw inside the chuck is actually broke then you have a gear problem inside your drill. This is actually a very common problem. Sometimes people push too hard on their drills and the gears inside wear out and break. This prevent the motor from wearing out, but, the gears have to be replaced.
If it is the gears and not the chuck. you broke the minimium of the front gear or gears inside your drill. YOU CANNNOT repair gears. they need to be replaced. you may be able to find some off brand gears to work but, you run the risk that they are not as strong as your original ones, or may not be exactly grooved correctly.
so, if replacing your chuck does not work. find replacement gears. IF you cannot find the gears from the manufacturer see about replacing your drill.
If the chuck is still good, keep it. If you buy the same model, keep your old drill for replacement parts, ie, switch, armature, cord, etc.
hope this helps somewhat.
Posted on Jun 11, 2009
Here is a link for a parts diagram for your model. It has the proper part number that you will need.
Hope this helps.
Posted on Sep 08, 2009
go to Dewaltservicenet.com and in the middle of the page type in your model number and you can download a breakdown for this tool. If I have answered your request would you please rate this response accordingly.
Posted on Oct 10, 2009
Tips for a great answer:
Mar 01, 2013 | Drills
Oct 10, 2010 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...
Oct 06, 2010 | Dewalt 18 Volt Dc988 Hammer Drill,dc825...
Oct 04, 2010 | Dewalt DW505 Electric hammer drills
Feb 25, 2010 | Dewalt Drills
Dec 05, 2009 | Dewalt 7.2-18.0 Volt One Hour Charger
Sep 07, 2009 | Dewalt DC988kar XRP 3 - speed 1/2" 18v...
Jun 12, 2009 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...
May 24, 2009 | Dewalt DC927KL Heavy Duty 18 Volt Cordless...
Apr 05, 2009 | Dewalt DW223G 3/8'' vsr drill with 3 wire...
107 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: