Question about Lenovo IdeaPad Computers & Internet

1 Answer

Loose vga lenovo laptop

The external vga connector seemed a bit loose from day 1. And now after about 6 weeks it is a bad connection - the screen flashes if I touch connection. (there are no screw holes to hold it in) . Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Lenovo Master
  • 20,000 Answers

Get it repaired/replaced under warranty as it is only a few weeks old.

Posted on Nov 25, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Dell Inspiron 2200 loose DC power pin connector

hi, the power jack must be removed by a strip out and de solder of jack and a new one fitted. I was lucky a guy took £30 for the job.

Posted on Feb 17, 2008

  • 351 Answers

SOURCE: Dell Inspiron 1000 Disassembly

Dear RBROWN67,
you can find the service manual for you DELL Inspiron1000 Notebook , from these URLs:

http://support.dell.com/support/edocs/systems/ins1000/en/index.htm

http://repair4laptop.org/disassembly_dell.html


Hope these sites are helpful for you in future also.

Cheerup and Be Happy always

Posted on Mar 14, 2008

SOURCE: Fujitsu Siemens Laptop loose screen

some hinge screws are under the power button bar,over over the keyboard,also in back or under the unit where the lcd is located

power button bar is also the hinge covers this pops out , but may be screws on bottom holding it

Posted on Jul 20, 2009

cheap to fix
  • 404 Answers

SOURCE: Toshiba Satellite P200 display keeps flickering

you have to rip apart everything carfuly, remove the four screws behing the runner covers on the screens lid.

Posted on Jul 30, 2009

bob_computer
  • 3153 Answers

SOURCE: connect broken laptop screen to external monitor

I would back mothmans answer 100% but might suggest you re-assemble the display to the laptop if you continue to have problems getting an external display going.

Posted on Sep 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lenovo z570 black screen at start up


You may like to check the Lenovo (IBM) page on screen diagnostics:
http://mobilesupport.lenovo.com/gb/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad-z570/documents/HT062642?tabName=Solutions

I searched the internet on "no display on laptop" which gave some informative results, but as only you know all the details of what is wrong only you can decide what is relevant.
I found the following interesting, but there are many more:
1. http://www.windowsbbs.com/pc-hardware/42349-laptop-no-display-screen.html
2. https://answers.yahoo.com/question/index;_ylt=AwrBTzGx1V5To3QA5QxLBQx.;_ylu=X3oDMTE0ZXVrMTVyBHNlYwNzcgRwb3MDMQRjb2xvA2JmMQR2dGlkA1FJVUswMV85Mg--?qid=20090409183121AACuZ46
3. http://www.ehow.com/way_5272815_laptop-display-screen-problems.html (on the right hand side of this article there are links toother articles about laptop screen problems)

Does your computer beep more than usual when you turn it on ? Tis may be a sign that components are loose or have come out, or there is some fault which must be looked up.

To find out if it's your screen, connect an external monitor via the VGA port on the side of your computer Press the function button to select the external screen, or both, and if you get a display on the external monitor it's your screen or components associated with it, for example the 'inverter' or the CCFL if your computer has one. It may be that the display has become disconnected from the computer (there is often a ribbon connector). It may even be the graphics/video hardware on your mainboard. If it's the screen, you can replace it: detailed instructions for a similar model are here
http://www.insidemylaptop.com/how-to-replace-lcd-screen-on-lenovo-ideapad-z575-laptop/

If this is case you need to disassemble your computer and find out what is wrong with screen. The manuals for your computer can be found here
http://mobilesupport.lenovo.com/gb/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad-z570

But you rea;;y need to find out what is wrong before you can even attempt to fix it. If you are not able/knowledgable enough to dissemble your computer, DON'T.

28.April.2014

Apr 28, 2014 | Lenovo IdeaPad Z570 15.6 inch Laptop -...

1 Answer

Lenovo ideapad laptop 6 weeks old . Bad vga connection .


Have it repaired/replaced under warranty from the shop where you bought it.

Nov 25, 2013 | Lenovo IdeaPad Computers & Internet

1 Answer

Laptop


No blinking cursor either?

{ If there is a blinking cursor, you would then use the Restoration Disk, IF you have it.
When asked choose Repair. (Non-Destructive Installation)
If you do not have it go to HP Support Worldwide, your country, and obtain the disk. (HP bought out Compaq. On the HP Support page for your country, go to the Top Right, click on the - Connect with HP - icon.

When you hover your mouse cursor over it, Connect with HP will briefly show)
The disk is free. The shipping and handling is not.
USA example: $17 for a 5 to 7 day ship, $24 for a 2 to 3 day ship. Call 1-800-474-6836. 24hrs a day, 7 days a week.

Have your Serial Number handy, to give to the nice representative on the phone. Bottom of the laptop in white Service Tag. S/N = Serial Number }

However no blinking cursor was stated. This means to me that it is a graphics problem.

The problem can be;
1) Graphics chipset
2) Video Cable. (Compaq/HP = Display Cable)

3) Screen Inverter. (IF used. Model Name and Model Number was not stated. This is the Product Number. P/N in white Service Tag, on bottom of laptop.

GENERALLY, if a CCFL is used for a Backlight, a screen Inverter is used. (Cold Cathode Fluorescent Lamp)

IF LED backlighting is used, GENERALLY NO screen Inverter is used. (Light Emitting Diode)
Does depend on what model we are talking about here.
There are some models that have used a screen Inverter, along with LED Backlighting.

4) LCD screen

A) Laptop OFF, monitor OFF, connect a VGA monitor to the VGA connector, on the laptop.
Usually on one of the sides, or back.
Here is a general example of a VGA connector (port), and a VGA Cable,

http://en.wikipedia.org/wiki/VGA_Connector

Scroll down a little for VGA Cable example.

You can use a CRT type of monitor (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable. (You can also use a VGA to DVI adapter, if the laptop has a DVI port on it,

http://en.wikipedia.org/wiki/Digital_Visual_Interface

You can click on any photo to enlarge. Sometimes you can enlarge twice )

B) Turn the monitor on. If a CRT type allow it to warm up.
Turn the laptop on.
By factory default settings, the display should show on the external VGA monitor.
IF not;

You have at least 3 display options available;
1) Internal monitor of laptop ONLY
2) Internal monitor of laptop AND external VGA monitor
3) External VGA monitor ONLY

Hold the Fn key down, and at the SAME time tap once on the F4 key. The F4 key is the Display Toggle-Over key.

Still no display on external VGA monitor?
Hold the Fn key down again, and tap once more on the F4 key.

NO display on external VGA monitor, means a problem with the graphics chipset.
Most of the time it is the MOUNTING of the graphics chipset TO motherboard.

The solder connections is the problem. Graphics chipset is reflowed to the motherboard, using an SMD/BGA Rework Station. Specialized shops have them.

Otherwise it means replacing the motherboard.

Good graphics on external VGA monitor means the problem is;
1) Video Cable
2) Screen Inverter (IF USED)
3) LCD screen

A Video Cable cost ranges from $9 to $22, with $9 being the norm.
It also just may have a loose connection. Loose at the motherboard side, or LCD screen side. May be screen Inverter cable connection, from Video Cable; is also loose.

So, you are looking at perhaps a loose connection of Video Cable.
Or a damaged Video Cable. (Replace then)

Problem may be the screen Inverter. (IF used)
They range from $9 to $22 also. (Again, $9 being the norm, or less)

LCD screen ranges from $60 to $245.
Just depends on what Compaq laptop it is.

Point?
Better to diagnose.
May find loose Video Cable connection, or bad Video Cable.
May find bad screen Inverter, if Video Cable is not the problem.

Some people jump the diagnostic flowchart, wind up spending $60 to $245 for an LCD screen, ONLY to find the problem was a $9 Video Cable, or FREE if the connection was loose.

Wish I could guide you from here. I step by step guide people, and this means replacing a motherboard in a laptop, if needed.
I have over 10,000 solutions, and many of them are for laptop repair. According to feedback from the asker's of the problems, I seem to have a very high ratio of accomplishment at this, because they repaired their problem/s.
(Brag, brag, lol!)

However it would seem a recent site development change, has rendered replies back from the problem asker, USELESS.
Haven't had a reply in two weeks, or more.
(Neither have the Top Experts)

Regards,
joecoolvette

May 20, 2013 | Compaq Computers & Internet

1 Answer

Vertical lines on my compaq cq61


Problem is;

1) Bad graphics chipset,
or
2) Bad Video Cable, or loose connections,
or,
3) Bad screen Inverter,
or,
4) Bad LCD screen.

A) Graphics chipset:

(Chip and Chipset are slang terms for I.C.
Integrated Circuit,

http://en.wikipedia.org/wiki/Integrated_Circuit

The chipset, or I.C. used for graphics; is the graphics chipset.
More properly known as the G.P.U.
Graphics Processing Unit,

http://en.wikipedia.org/wiki/GPU )

Laptop OFF, monitor OFF, connect a VGA monitor; to the VGA connector on the laptop. (Port)
(Left side of laptop, if memory serves)

This is a General example of a VGA connector, (Port), and VGA cable,

http://en.wikipedia.org/wiki/VGA_Connector

You can use a CRT type of monitor (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable.

Turn the monitor on. If a CRT type allow it to warm up.
Turn the laptop on.
By factory default settings, the display should show on the external VGA monitor.
IF not;

You have at least 3 display options available;
1) Internal monitor of laptop ONLY
2) Internal monitor of laptop AND external VGA monitor
3) External VGA monitor ONLY

Press, and hold the Fn key down, and at the SAME time tap once on the F4 key.
(The F4 key is the Display Toggle-Over key)

Still no?
Hold the Fn key down again, and tap once more on the F4 key.

Same display on external VGA monitor (Red lines), suggests problem with the graphics chipset.
Good display on external VGA monitor means;

Problem with;
1) Video Cable
2) screen Inverter
3) LCD screen

http://tim.id.au/laptops/hp/hp%20g60%20compaq%20presario%20cq60.pdf

If you find it is one of the three stated above, post back in a Comment; and I'll guide you step by step, in diagnosing.

Will require partial disassembly of laptop, but not very far.
Will also require an ESD wrist strap.
Average cost is around $3 to $6.

Example,

http://www.radioshack.com/product/index.jsp?productId=2103245

Needed to keep from Static shocking, the delicate hardware components inside the laptop.

[All power removed;
Loosen Keyboard, and roll over out of the way. Do NOT disconnect Keyboard Cable.
Remove Keyboard Cover.
Remove Display Bezel.
Remove screws that hold LCD screen to Display Cover, and check Video Cable connections to back of LCD screen.

The plastic frame in front of the LCD screen, is the Display Bezel.
Laptop closed the top cover is the Display Cover.

Just basic instructions. Like I said, I will step by step you through it, if you wish ]

[Primer:
An LCD screen cannot produce light. It needs an additional light source.
A Backlight is the additional light source.

A Backlight can be a CCFL (or more than one), or a series of LED's.
(Light Emitting Diode)

The Compaq Presario CQ61 series of Notebook PC's, uses a single (1) CCFL.

A CCFL is a Cold Cathode Fluorescent Lamp.
Similar to Fluorescent lighting used in homes, and businesses; but on a MUCH smaller scale.

Average thickness is 2mm. That is a little more than 1/16th of an Inch, or about the width of this capital letter -> O <-

Average length is almost as long, as the LCD screen is in height.
View the last 8 photos,

http://www.laptoprepair101.com/laptop/2007/12/09/replace-laptop-backlight-ccfl-lamp/

The screen Inverter converts the power (Electricity), from the laptop; for the LCD screen, and Backlight.
Backlighting that uses CCFL, uses a screen Inverter.

Backlighting that uses a series of LED's, May or May Not use a screen Inverter.
It seems when the LED technology first came out, they did.
Later designs do not seem to.

Regards,
joecoolvette

Mar 25, 2013 | Computers & Internet

1 Answer

Display divided into 3 parts


LCD screen cracked, and Three even strips going across? Doubtful. Haven't seen it but I always have my mind open.

Three strips that are irregularly shaped? Look like glass that has cracked?
'Jagged edges'?

LCD screen is broken.

Three even strips indicates to me, that there may be a problem with the Video Cable. Then the screen Inverter is next in the diagnoses.
My money is on the Video Cable.

ALL power removed, Anti-Static Precautions FOLLOWED, I would check out the graphics chipset first.

1) Laptop OFF, monitor OFF, connect a VGA monitor to the VGA port on the laptop.
Left rear side. This is an example of a VGA Cable, and VGA connector. (VGA port on a laptop ),

http://en.wikipedia.org/wiki/VGA_connector

(Color of connector does Not matter. It is generally Blue, though)

You can use a CRT type of monitor, (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable.

2) Turn the monitor on. If a CRT type allow it to warm up.
Turn the laptop on.

There are at least 3 display options available;
1) Laptop internal monitor ONLY
2) Laptop internal monitor AND external VGA monitor
3) External VGA monitor ONLY

Press, and hold down on the Fn key, and at the same time tap once on the F5 key. (The F5 key is the Display Toggle-Over key)

No display on external VGA monitor?
Hold the Fn key down again, and tap once more on the F5 key.

Is the display on the external VGA monitor, the same as the internal monitor of the laptop?

Problem is the graphics chipset.

Display is fine on the external VGA monitor?
Problem is the Video Cable, screen Inverter, or LCD screen.

Video Cable:

A) http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/big/Toshiba-Satellite-A105-14.jpg

Switch Cover removed, Keyboard removed. Shows you where the Video Cable plugs into the motherboard.

B) http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/big/Toshiba-Satellite-A105-21.jpg

Palm Rest Cover you can see the white rectangular connector, for the motherboard side of the Video Cable, at the top left.
It's above the black cable, and near the screw hole.

The Video Cable leads from the motherboard, up through the left Hinge, and into the Display Assembly.
From there it connects to the screen Inverter, and back of the LCD screen.

http://www.ebay.com/itm/Toshiba-Satellite-A105-6017B0050801-LCD-Video-Cable-Genuine-OEM-Laptop-TESTED-/290754851160?forcev4exp=true&forceRpt=true

In the photo, (You can hover your mouse cursor on it to enlarge), the right side connector plugs into the back of the LCD screen.

The black connector to the far left connects to the motherboard.
The small white connector at the top with the Red, Green, Black, etc wires, connects to the screen Inverter.

(The small Black cable, that comes out from the black motherboard connector, is a Ground wire )

Due to the close proximity of the Video Cable to the left Hinge, it can be pulled on from just normal opening, and closing of the laptop over time.

This means the Video Cable connection on the motherboard side could be loose, or the LCD screen side, or both.

The diagnoses is to PHYSICALLY check BOTH connections. A loose connection at the motherboard, or at the back of the LCD screen could be so small in distance, that you will not see it with the human eye.

Could also result in damage to the Video Cable.
View the Video Cable with the Switch Cover removed, and see if there are any obvious signs of damage to the sheath of the cable.

If there is there could be damage to the tiny wires inside the Video Cable. (Stretched/Broken)

Use a multimeter set to OHMs, to check all wires inside the Video Cable for continuity, or have a 'Mom and Pop' computer store check it for a few bucks, or replace the Video Cable.

Video cable connections are tight? Video cable continuity check checks out OK?
Screen Inverter.

The test for a screen Inverter is to use a sensitive multimeter.
Read fairly expensive.

http://www.fonerbooks.com/test.htm

Not having access to a sensitive multimeter that you can use, means just replacing the screen Inverter. Seems like 'part changing', and it is, but you have to work with what you've got.

http://www.sparepartswarehouse.com/Toshiba,Satellite,A105,Laptop,Inverters.aspx

Find THE model number for your laptop, and the correct screen Inverter. A screen Inverter, and an LCD screen are a MATCHED unit.

Screen Inverter is checked out to be OK, or replaced, and symptoms are still the same, the problem is the LCD screen.

Remember, the first part of the diagnoses was to see if the divided parts were EVEN going across, or jagged and irregularly shaped.

Jagged in shape, and not even strips going across, means cracks in the LCD screen.
Replace.

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-replace-LCD-screen-1.htm

[ Main article for A and B links above;

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-A105/remove-motherboard-1.htm ]

For additional questions please post in a Comment

Regards,
joecoolvette

Oct 22, 2012 | Toshiba Sattelite A105-S2051 Notebook

1 Answer

Does Lenovo 3000 Y410 support dual monitors


Yes.

1) Laptop OFF, monitor OFF.
Connect a VGA monitor to the VGA port, on the back of the laptop.

The VGA port is on the right side, as you view the back of the laptop.
This is a basic example of a VGA cable, and a VGA port, (Connector),

http://en.wikipedia.org/wiki/VGA_connector

NOTE* Color does Not matter.

You can use a CRT monitor, (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable.

Turn the monitor on. If a CRT type allow it to warm up.
Turn the laptop on.

By default the display should show on the external VGA monitor.

IF not;
Press, and hold down on the Fn key, and at the same time tap once on the F3 key.

No?
There are at least 3 display options;

1) Internal monitor of laptop ONLY

2) Internal monitor of laptop AND external VGA monitor

3) External VGA monitor ONLY

Hold the Fn key down, and tap again on the F3 key.

(The Fn key is down at the bottom LEFT corner of the Keyboard.
The F3 key is at the top of the Keyboard.
The F3 key is the Display Toggle-Over key )

Need more information post in a Comment.

Regards,
joecoolvette

May 18, 2012 | Lenovo 3000 Y410 (59012354) PC Notebook

1 Answer

Screen blank with white dot


Problem with;

1) Video cable:

A) Video cable connection on motherboard side is loose, and/or on back of LCD screen.

B) Video cable is damaged.

2) screen Inverter:

screen Inverter is bad.

3) LCD screen:

LCD screen is bad.

4) Graphics chipset:

Graphics chipset is bad.

Suggest you connect a VGA monitor to the VGA port (Connector) on your laptop.
See if the problem is the graphics chipset, Or video cable, Or display assembly.

You didn't state what manufacturer and Model Number of laptop this is.
All I can do is state generic information.

This is an example of a VGA Cable, and VGA connector,

http://en.wikipedia.org/wiki/VGA_connector

The VGA connector will be on the side, or back of your laptop.
For the VGA monitor you can use a CRT type monitor, (Looks like a small TV), or a flat LCD screen monitor that has a VGA cable.

Laptop OFF, monitor OFF, connect the external VGA monitor to the laptop.
Turn the monitor on. If a CRT type allow it to warm up.

Turn the laptop on.
By default the display should show on the external VGA monitor.
IF not;

There are at least 3 display options.
1) Laptop internal monitor ONLY
2) Laptop internal monitor AND external VGA monitor
3) External VGA monitor ONLY

Press, and hold down on the Fn key, and at the same time tap once on the Display Toggle-Over key.
(For an example HP's usually use the F4 key for a Display Toggle-Over key)

Display shows the same on the external VGA monitor?
You have a bad graphics chipset.

[ Some laptops have been erroneously stated as having a graphics card, when in fact they do not.
The GPU (Graphics Processing Unit) is soldered directly to the motherboard.
This is Integrated Graphics.

http://en.wikipedia.org/wiki/GPU

There is no changeable, replaceable graphics card. Therefore the solution is motherboard replacement ]

IF, the display is good on the external monitor, you have a problem with the Video Cable, and/or in the Display Assembly.

After diagnosing with an external VGA monitor, post back in a Comment.
Also post the manufacturer name, and model number of the laptop.

Regards,
joecoolvette

Apr 22, 2012 | Computers & Internet

1 Answer

Video on my toshiba L455=s5009 comes on for a few seconds then blacks out


From your brief diagnoses stated, it sounds like a bad Video Cable.

The Video Cable routes from the motherboard, across one edge of the Fan Assembly, and under the left Hinge assembly,

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-Pro-L450-L455/big-body/laptop-disassembly-19.jpg

With just the usual opening, and closing of the laptop, the Video Cable's sheath may be damaged. This means the tiny wires inside the sheath may be damaged.
(Stretched/Broken)

http://www.irisvista.com/tech/laptops/Toshiba-Satellite-Pro-L450-L455/laptop-disassembly-1.htm

http://www.laptoprepairparts.com/html/details.asp?ref=1860&category=cables

Or it may be the screen Inverter that is damaged, or going out,

http://mcccomputers.com/shop/lcd-inverters/3666-new-toshiba-satellite-l455-s5009-l455-s5045-lcd-inverter-pk070006t20-k000087330.html

Or the LCD screen assembly.

Could be the graphics chipset.

Diagnose.

1) Laptop OFF, monitor OFF, connect an external VGA monitor to the laptop's VGA connector, on the back of the laptop.

[ RBG (Monitor) port ]

You can use a CRT monitor (Looks like a small TV), or a flat LCD screen monitor if it has a VGA cable, for the external VGA monitor.

[ Example of a VGA cable, and a VGA port (Connector),

http://en.wikipedia.org/wiki/VGA_connector ]

Turn the external VGA monitor on. If a CRT type allow it to warm up.
Turn the laptop on.

By default the external monitor should show the display, also.
IF not;
1) Press, and hold down on the Fn key, and simultaneously tap on the F5 key. (The F5 key is the Display toggle-over key)

Not showing on the external VGA monitor? Perform the above procedure again.
There are several display options.

External VGA monitor also show the same symptoms?
Bad graphics chipset. Replacing the motherboard is the most cost effective method, and easiest method.

External VGA monitor does Not show these symptoms?
Problem is the Video Cable, or screen Inverter, or LCD screen.

Due to movement of the LCD screen, which means movement of the Video Cable, my money is on a bad Video Cable.

(A Video Cable can be unplugged partially, real easy, on the back of the LCD screen.
It MAY look plugged in tightly, but may not be.

It can also be unplugged real easy when assembling the Display Assembly, to reinstall back on the laptop )

Check the Video Cable's wires with a multimeter. Perform a continuity check of all wires in the cable. (Multimeter set to Ohms)

Have an assistant also gently wiggle the cable, as you are testing. See if there is an intermittent break, due to a stretched/broken wire.

Or just buy a replacement Video Cable, and use it.

For additional questions please post in a Comment.

Regards,
joecoolvette

Feb 04, 2012 | Toshiba Satellite L455-S5009 laptop

2 Answers

Broken screen, external monitor via VGA won't


Press "Fn+F7" once, wait a few seconds, and press it again, to "cycle" through all the possibilities (LCD-only, VGA-only, both).

Try the monitor with some other computer (desktop or laptop) to see if the monitor works at all.

Restart your computer -- does the initial "splash" screen (showing CPU speed and RAM-test) show? Does the "Windows" screen (with the crawling worm) show on the external monitor?

Nov 16, 2009 | Lenovo 3000 N500 Notebook

1 Answer

Compaq presario 1700 LCD issues


i have the exact same problem. try connecting the laptop to an external VGA screen. if it works, then the problem is most likely a loose cable (connector). It turns out that the connector (which connects the motherboard or gfx card to the LCD screen) on my laptop is torn and cut. see if u have the same problem. this link might help u check out ur problem:
http://www.laptopparts101.com/lcd-screen-video-cable/

Nov 21, 2008 | Compaq Presario 1700 Notebook

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lenovo Computers & Internet Experts

Michael Vincent Cruz

Level 3 Expert

868 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

rey francis basa
rey francis basa

Level 3 Expert

666 Answers

Are you a Lenovo Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...