Question about Insignia IS-LCDTV32 32 in. Television

1 Answer

The volume gets to begining and the end automatically. i cant control it by pressing the remote

Posted by on

  • Anonymous May 10, 2009

    the volume is all the way sown and wont let me control it with the remote and when i go to menu setting it just flash through the settings but wont stop?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 814 Answers

This is a problem on the main board. This board controls all the switching functions and the video and sound functions. The problem could be a simple component failure like a bad capacitor or a failure in the controlling IC itself. The unit should be sent or taken in to a service center for testing and servicing. The service center will have all the service information to deal with the problem. You can call Insignia customer support at this telephone number. 1-877-467-4289. Or visit their website at www.insignia-products.com. Tell them the model number of your television and the problem you are having with it. They will be able to tell you how to get service for your television. I hope this information helps you with your problem.

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I NEED A KEY CODE FOR THE BUILT IN RADIO IN A FORD FIGO 1.4 AMBIENTE 2012 MODEL


Try this, found it on another answer board.

Press and hold the Auto button. While holding the Auto button, push and hold the Track Up button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly. Video Unlock: Use a remote from a higher end CD Receiver or any Excelon CD Receiver. Some Video remotes will work, switch on remote must be set to AUD. Press 55222277 on the remote. There will be NO visual verification when entering the override code. Head units with a Up / Down Volume control buttons: Press and hold the Volume Up button. While holding the Volume Up button, push and hold the Disp button. The “_ _ _ _” will disappear after about 5 sec. Enter KCAR using the remote control from a higher end CD Receiver or any Excelon CD Receiver. Enter "KCAR” with the remote controller as described below. “K”: Press TRACK UP key (>>|) after pressing 5 key twice. “C”: Press TRACK UP key (>>|) after pressing 2 key once. “A”: Press TRACK UP key (>>|) after pressing 2 key three times. “R”: Press TRACK UP key (>>|) after pressing 7 key twice. * If you commit a mistake in the code entry, the unit enters the code request mode again. Press the Track Advance button on the remote to enter the override code. The unit will enter the All Off or Standby mode if done properly.

Read more: How can I get the key code for ford figo radio systems? - Radio system key code ford figo :: Ask Me Fast at http://www.askmefast.com/How_can_I_get_the_key_code_for_ford_figo_radio_systems-qna4609185.html#q2909005

Dec 09, 2015 | Ford Cars & Trucks

1 Answer

How do I retrieve recorded messages from an outside phone?


You can access the answering system remotely by dialing your home telephone number from any touch-tone telephone. To remotely access the answering system
Dial your telephone number from any touch-tone telephone. When the answering system answers, enter the two-digit remote access code (19, unless you have changed it). The answering system automatically announces the number of messages (new or old) if there are any. If there are new messages, the answering system automatically begins to play new messages only. -OR If there are no new messages, the answering system automatically begins to play all old messages. You can also enter the remote commands: Play all messages
1 Press to listen to all messages. If there are new messages, the system plays back only the new messages (oldest first). If there are no new messages, the system plays back all old messages (oldest first). Play new messages
2 Press to listen to new messages only. Delete a message 3 Press during message playback to delete the current message. Delete all old messages
3 Press to delete all old messages. Replay current message or previous message
4 To repeat the message currently playing, press 4 after the answering system plays the day and time the current message was received. To listen to the previous message, press 4 while the answering system is playing the day and time the current message was received. Stop
5 Press to stop playback and recording. Play help menu * 5 Press to listen to a list of remote commands. Skip to next message
6 Press during playback to skip the current message and advance to the next message. Record a announcement
7 Press to record a new announcement. Begin speaking after the long beep. Turn system on or off 0 Press to turn the answering system on or off. Exit
8 or hang up Press to end remote access (the call is terminated). 1. 2. 3. 4.5
0 Answering system Remote access Hang up to end the call and save all messages.
NOTES: If you do not enter a valid remote access code, the system answers the call automatically. If the date and time is not set when a message is recorded, the system announces, "Time and date not set" before the answering system announces the number of messages. If there are no messages in the answering system, the system announces, "You have no message." If there are no new messages in the answering system, when you press 2 to play back new messages, the system announces, "You have no new message." If you pause for more than four seconds during remote access, you hear a help menu listing all features and commands. If there is no command for another 20 seconds, the call ends automatically. If the memory is full, the answering system answers after 10 rings and announces, "Memory is full. Enter the remote access code." Enter your remote access code to access the messages and announcements. When the answering system is turned off, the telephone answers after 10 rings and announces, "Please enter your remote access code."

Mar 13, 2015 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

Remote control signal won't stop


Does the action stop if you cover the end of the remote? Is the remote a 3rd party remote? May just keed the keypad ckeaning

Dec 03, 2013 | Televison & Video

1 Answer

HOOKED ALL MY SPEAKERS UP BUT SUB AND CANT GET ANY SOUND FROM FM OR TV THAT I HAVE HOOKED UP AM I MISSING SOMETHING ALSO THERE IS A LIGHT THAT SAYS SOUND MUTE BY FM


From the remote control ONLY:

Press MUTING to mute the sound through all

speakers and headphones connected.

"MUTING" appears on the display and the

volume turns off (the volume level indicator goes

off).

To restore the sound, press MUTING again so that "OFF" appears

on the display.

• Turning MASTER VOLUME on the front panel or pressing
VOLUME +/- on the remote control also restores the sound.

Dec 22, 2010 | JVC RX-778V

2 Answers

I cant program my uverse remote with my 32 inch emerson lcd tv.


Try using the codes for Funai, Daewoo, all the low end China sets.

Dec 18, 2010 | Televison & Video

1 Answer

How do you hook up a ps3 remote control to play games with the ps3 remote.


    1. Turn off your PS3 console and disconnect it from the power supply.

    2. 2

      Insert the USB cable provided with your console into an open contoller port. The controller ports are found on the left side of the front of the PS3.

    3. 3

      Insert the other end of the USB cable into the back of the wireless remote controller that you want to sync with the PS3.

    4. 4

      Reconnect the power supply to the PS3 and turn it on. The wireless remote control should sync automatically with your console. If it does not begin automatically, press the "PS" button at the center of your controller. This will begin the process. Once the sync is complete, you can disconnect the USB cable and the controller will communicate with your PS3.


Nov 21, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

Bn59 00463 volume works nothing else cant turn on


Step 1: Remove the batteries

Step 2: Press the power button (red button) on the remote control 5 times.

Step 3: Replace the batteries and your remote should work fine.

Oct 20, 2009 | Samsung Televison & Video

1 Answer

Sky remote wont control on/off , volume, or terrestrial channels


Press tv on the Sky remote

press and hold select and red until the led blinks twice
type in 0 0 6 0
press the power button, if the tv turns off then the press select and the remote should work all the tv functions.

If the tv does not turn off then press tv then the power button and keep doing this until the tv turns off, once it turns off press select and it should work.

If you have any problems let me know

Dazz

Feb 15, 2009 | Samsung LW20M21C 20 in. LCD Television

2 Answers

Cant find remote and subwoofer is off.


I had the same problem, lost the remote during a move. I ended up using a really cheap GE (general electric) universal remote. It's a blue and silver remote that cost $5 at bestbuy. Programming code for Aiwa is 839. Then, pressing the "enter" button on the universal remote brings up the subwoofer menu, and pressing it repeatedly will scroll through the individual volume controls for the other speakers.

As far as I know, there is no way of accessing this menu without a remote. Aiwa dropped the ball on that one.

Nov 03, 2007 | Aiwa AV-D67 Receiver

Not finding what you are looking for?
Insignia IS-LCDTV32 32 in. Television Logo

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73647 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5058 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...