Question about Jura Capresso CoffeeTEC 471 Coffee Maker
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I know it's not the same make as mine, but when I had that problem, it was the strainer holes that were blocked and the coffee wouldn't filter through, I just took a wire brush to it and cleared the holes no problem and away she went. . Hope that helps
Posted on Jul 05, 2009
I had a similar problem. I took off the side and rear cover, followed the hose that comes from the steam wand to the rear of hte unit. It enters a solenoid made by ACL Italy. I dismantled the solenoid unit by disconnecting the two hose ends, removing the relay, and unscrewing the plunger unit (vertical pipe). The plunger unit internals should move freely up and down like a piston in a cylinder , powered by a small spring. In my unit, this plunger was calcified and seized. I soaked it in boiling water and pressed on it gently several times and it unstuck. I put it all back together again and presto! Good luck
Posted on Mar 30, 2010
Tips for a great answer:
Dec 31, 2010 | Jura Capresso Impressa S9 Coffee...
Apr 28, 2010 | Jura Capresso Impressa S90 Espresso...
Jul 05, 2009 | Jura Capresso CoffeeTEC 471 Coffee Maker
Mar 22, 2009 | Jura Capresso CapressoBAR 351 Coffee...
Feb 21, 2009 | Jura Capresso CoffeeTEC 471 Coffee Maker
33 people viewed this question
Usually answered in minutes!
Level 3 Expert
Level 3 Expert
Level 1 Expert
Step 2: Please assign your manual to a product: