Question about RCA P52926 52" Rear Projection Television

1 Answer

Xbox need help with my xbox i get audio but no video when it s turned on what could be the problem

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.


    An expert who has answered 20 questions.

  • Expert
  • 113 Answers
Re: xbox

This 360 or original?

anyhoo, check the yellow video cable for any cuts, pinches, etc and if you can borrow a mates and test it on your box, aso try plugging your xbox into a DVD/BR or even VCR and then the DVD/BR VCR into the TV.


Posted on Oct 10, 2007

Testimonial: "YES"

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

How should I connect a Sony Wega KF-50WE620 to an XBox360 ?

Since the TV accepts HD signals only via DVI and component inputs, the only logical way is to use the "Xbox 360 Component HD AV Cable" as show in the link below:

How to hook up your Xbox 360 or Xbox 360 to TV

The TV will not accept a VGA input. A cable converting HDMI to DVI would also require that you break out the L + R audio channels, too. The one I mentioned above does this all for you with no degradation in video signals.

Mar 26, 2015 | Sony Grand WEGA KF-50WE620 Television

4 Answers


The videos you are watching have bad audio guality, you need to get a video with good enought audio.

Apr 17, 2008 | Projection Televisions

1 Answer

How do you get your xbox 360 to play, on a 65'' mitubishi projection tv,its connected but nothing comes on screen when i put a movie in just a blank screen and no sound,if i'm on a channel,the channel...


The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)


So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Nov 03, 2013 | Mitsubishi WD-73734 73" Television

1 Answer

I have a toshiba rear projection tv 40inch model no 40pw13p, does anyone know how i connect the xbox 360 as i cant get any av channels up?

Hello:The xbox came with an audio and video cable, probably componet cables on one end, if you are going to use HDTV input which is the red/grn/blue cables on the end of you xbox plug them into the corresponding color in the back of the tv, also on your cable is a switch labeled HTDT and TV make sure the switch is in the HDTV mode if you are going to connect the componet cables if you are going to use regular video then make sure its in the other posistion. If you use componet cables you are going to use the red an white audio cables also a total of five cables should be connected to the TV. Some newer xboxs have hdmi output as well this is the better of the three connections as it also has audio and hd all on one cable. using your tv's remote switch the tv's input to the same input you connected your xbox to. HAPPY GAMING..

Sep 29, 2011 | Projection Televisions

1 Answer

I would like to connect my my hp laptop to my Sony Grand WEGA KDP-57WS550 57 in. Rear Projection HDTV-Ready Television to watch netflix

You need to connect your PC to either your TV or your receiver. Also, if you have XBox, you can watch Netflix through it (thought I'd suggest, just in case).

Take your PC (or take a photo of your available outputs from your PC) and a photo of your available inputs (on your TV or receiver) to Best Buy or similar computer store. They can help you learn which connections you need.

Most likely you'll need a DVI to HDMI cable for video, and maybe a separate audio cable from your headphone connection on your PC to your TV (or receiver). You'll only need a separate cable for audio if your HDMI input on your TV does not support audio.

I am going through this same problem with my TV connecting Apple TV. I am checking now whether my old rear projection tv's HDMI input supports audio (same as yours). I've connected Apple TV to my rear projection TV. I have video, but no sound. Either my TV doesn't support HDMI audio, or I need to change a setting on the TV to enable that sound to work. If the TV does not support HDMI audio, I will need to connect Apple TV directly to my receiver via a digital optical cable for sound.

Hope this helps.

Jun 22, 2011 | Sony Grand WEGA KDP-57WS550 57" Rear...

1 Answer

How do i hook my XBOX-360 up to this tv and get 1080i resolution? Thanks, Mike

You should be able to get 1080i with the Input/DVI port or the component video in ports of the TV. I believe the easiest option will be to set the XBox A/V switch to HDTV and use a component video cable (red, green, blue) from the XBox component out to the TV Component In. (with the audio out going to your TV or speaker system). Turn on the X-box and the My Xbox > System Settings. Then Console Settings > Display and chose the 1080i.

Set the TV Net Command (remote) and the Device settings for the input jack in use (component 1/2). Adjust the A/V menu for the Display before playing long.

Wen you change inputs, you will see a status screen for the settings for the TV input.

I hope this helps.

Cindy Wells

Sep 14, 2010 | Mitsubishi WS-48513 48" Rear Projection...

1 Answer

How to hook up xbox 360 to jvc dlp thru hdmi ports

You can use an HDMI-to-DVI cable for the TV's DVI input and this would give you video at full HD 1080p resolution but you need to route the audio via standard red & white RCA. It would be better if it has digital audio inputs such as optical or coaxial to get Dolby Digital and other digital formats from your source.

If in the unlikely scenario that it does not have a DVI input (which looks similar to your PC's blue VGA only wider and is white) you can hook it up to your component video-in (which is the red/blue/green RCA inputs). For this you need a cable that has HDMI on one end and red/blue/green for video RCA's +red/white RCA's audio.

This would give you 1080i resolution with stereo audio.

Hope that helps.

Aug 27, 2009 | JVC Projection Televisions

1 Answer

Philips 1080i xbox 360 hook up

you need to change the settings on the xbox aswell.

go to your settings menu and change the picture settings to 1080i

Oct 27, 2008 | Mitsubishi WS-55857 55" Rear Projection...

1 Answer

52 in RCA

The RCA needs a flyback if its an ITC222 chassis which is waht the D52W20 RCA is. You can get a replacement flyback at the following link with free tech support so you can do the repair yourself which is a very easy repair. You need flyback number 259296. As far as the XBOX you should never play any video games on a rear projection TV as it can cause burn in on the CRTs if it is paused. video games are best played on a direct view, plasma or LCD TV. Rear projections like the RCa is not a good idea because of the possible burn in. heres a link to your flyback 259296

May 27, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA P52926 52" Rear Projection Television Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides